Concrete Slab Calculator
Draw the slab, set how thick it is and see the concrete to order…
Draw the slab, set how thick it is and see the concrete to order, in cubic yards or bags, with the extra the ready-mix industry says to allow.
More options10% extra · 80 lb bags · 10 yd³ truck
Extra to allow
The ready-mix industry (NRMCA) says to order 4% to 10% more than the plan dimensions give, for spillage, a low spot in the ground and forms that bow.
NRMCA: truck mixers carry 8 to 12 cubic yards (about 6 to 9 m³).
Compare prices (optional)
Prices from your store and your local ready-mix plant. Small orders often carry a short-load fee: ask, and put it under delivery.
ExampleConcrete to order
7.83cubic yards
352 bags of 80 lb, or part of one ready-mix truck.
Enter yours to see your result.
Bags, by size
Or ready-mix: part of one truck
Have prices? Compare bags with a truck under More options.
- Volume
- 211.2 cu ft with 10% extra
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms
My shopping list
Add each part of a job and print one list: a paver patio is base stone, bedding sand and the pavers; a fence is post holes. It stays on this device.
How this works: 9 sources,
How this works
Method
A slab’s volume is its area times its thickness, with the thickness turned into feet first. Draw the slab as one shape or several (a patio with a bump-out is a rectangle plus a smaller one), and any cut-out such as a tree well is taken away. The calculator adds the extra you pick and gives the result in cubic yards, the unit you order ready-mix in, with cubic feet and the number of bags beside it. Full method
Sources
- International Residential Code 2021: R311.3, R311.7.5, R403.1.1, R506.1 (International Code Council, 2021)
- CIP 8, Discrepancies in Yield (National Ready Mixed Concrete Association)
- CIP 31, Ordering Ready Mixed Concrete (National Ready Mixed Concrete Association, 2023)
- QUIKRETE Concrete Mix (No. 1101) data sheet (QUIKRETE, revised October 2022)
- Sakrete High Strength Concrete Mix data sheet (Sakrete (Oldcastle APG), REV 7-10)
- Sakrete Concrete Mix product data sheet (30 kg) (Sika Canada)
- Highway Maintenance Tables and Conversion Factors: loose and compacted weights of materials (Missouri Department of Transportation, Engineering Policy Guide)
- Seal Coat and Surface Treatment Manual: haul trucks, size (Texas Department of Transportation)
- NIST Handbook 44 (2026), Appendix C: General tables of units of measurement (National Institute of Standards and Technology, 2026)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Limits
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: draw any area and see bags on a pallet, yards or trucks, with 14 job and material pages and a shopping list kept on your device.
How the slab is worked out
A slab’s volume is its area times its thickness, with the thickness turned into feet first. Draw the slab as one shape or several (a patio with a bump-out is a rectangle plus a smaller one), and any cut-out such as a tree well is taken away. The calculator adds the extra you pick and gives the result in cubic yards, the unit you order ready-mix in, with cubic feet and the number of bags beside it.
Here is a second one by hand. A 16 × 20 ft garage apron poured 5 inches thick is 320 sq ft × 5 ÷ 12 = 133.3 cubic feet, or 4.94 cubic yards. With 7% extra that is 5.29 cubic yards: 238 bags of 80 lb, which is a lot of mixing, or about half of a 10 yard ready-mix truck.
Residential slabs are usually 4 inches thick; the International Residential Code asks for at least 3½ inches for a concrete floor on the ground. Driveways and slabs that carry a vehicle or a hot tub are often poured thicker, at 5 or 6 inches, which is why the thickness chips run from 3½ to 6.
cubic yards = length (ft) × width (ft) × thickness (in) ÷ 12 ÷ 27
- The IRC (R506.1) asks for concrete slab-on-ground floors not less than 3½ inches thick. Source: International Residential Code 2021: R311.3, R311.7.5, R403.1.1, R506.1.
- Order 4% to 10% more than the plan dimensions give, to cover waste, a low sub-base and forms that bow. Source: CIP 8, Discrepancies in Yield.
- Truck mixers carry 8 to 12 cubic yards, so a patio is usually part of one load. Source: CIP 31, Ordering Ready Mixed Concrete.
Concrete for common slab sizes
With 10% extra. Bags are 80 lb (0.60 cu ft each); trucks hold 10 cubic yards.
| Slab | 4 in thick | 80 lb bags at 4 in | 6 in thick | Trucks at 4 in |
|---|---|---|---|---|
| 10 × 10 ft | 1.36 yd³ | 62 | 2.04 yd³ | 1 |
| 10 × 12 ft | 1.63 yd³ | 74 | 2.45 yd³ | 1 |
| 12 × 12 ft | 1.96 yd³ | 88 | 2.94 yd³ | 1 |
| 12 × 16 ft | 2.61 yd³ | 118 | 3.92 yd³ | 1 |
| 16 × 20 ft | 4.35 yd³ | 196 | 6.52 yd³ | 1 |
| 20 × 20 ft | 5.44 yd³ | 245 | 8.15 yd³ | 1 |
| 24 × 24 ft | 7.83 yd³ | 352 | 11.74 yd³ | 1 |
| 30 × 30 ft | 12.23 yd³ | 550 | 18.34 yd³ | 2 |
| 8 × 8 ft | 0.87 yd³ | 40 | 1.31 yd³ | 1 |
| 4 × 4 ft | 0.22 yd³ | 10 | 0.33 yd³ | 1 |
Common questions
How thick should a concrete slab be?
Four inches is the usual thickness for patios, sheds and walkways, and the International Residential Code asks for at least 3½ inches for a slab-on-ground floor. Slabs that carry cars, heavy equipment or a hot tub are often 5 or 6 inches. Your local code and the use of the slab decide; this calculator just gives the concrete for the thickness you choose.
How many yards of concrete for a 24 × 24 garage?
A 24 × 24 ft slab 4 inches thick is 576 sq ft × 0.333 ft = 192 cubic feet, or 7.11 cubic yards. With 10% extra, order about 7.8 yards: one truck. At 6 inches it is 10.7 yards before the extra, more than many trucks carry in one load.
Should the slab sit on gravel?
Most slabs sit on a compacted sub-base of gravel or crushed stone, which drains water and gives an even bed. Measure the concrete from the top of that base. The crushed stone calculator works out the base itself, in tons, allowing for the stone that compacts away.
Does thicker edging change the amount?
Yes. Many slabs have a thickened edge, a turned-down footing round the outside. Work out the slab at its normal thickness here, then add the edge as a footing on the footing page, using the outline and the extra depth, and add the two.