Skip to content

How Many Bags of Concrete Do I Need?

The number of bags for your pour in every common size…

The number of bags for your pour in every common size, from the yields on the bag makers’ data sheets, and what they weigh to lift.

Slab48 sq ft
8′6′
ft
ft
How many1
in
Concrete · 4 in024681012in
More options10% extra · 80 lb bags · 10 yd³ truck

Extra to allow

The ready-mix industry (NRMCA) says to order 4% to 10% more than the plan dimensions give, for spillage, a low spot in the ground and forms that bow.

cu ft a bag
cu yd

NRMCA: truck mixers carry 8 to 12 cubic yards (about 6 to 9 m³).

Compare prices (optional)

$
$
$

Prices from your store and your local ready-mix plant. Small orders often carry a short-load fee: ask, and put it under delivery.

ExampleBags to buy

30bags of 80 lb

0.66 cu yd with 10% extra, 1.2 tons of bags.

Enter yours to see your result.

Bags, by size

30 bags in stacks of 10 · 1.2 tons to lift

Or ready-mix: part of one truck

7% of a 10 cubic yard mixer

Have prices? Compare bags with a truck under More options.

Or ready-mix
part of one ready-mix truck

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms

My shopping list

Add each part of a job and print one list: a paver patio is base stone, bedding sand and the pavers; a fence is post holes. It stays on this device.

How this works: 9 sources,

How this works

Method

A bag of concrete mix makes less concrete than its size suggests, because the dry mix is dense. The bag makers print the yield on their data sheets: QUIKRETE’s Concrete Mix gives 0.30 cubic feet for a 40 lb bag, 0.375 for 50 lb, 0.45 for 60 lb, 0.60 for 80 lb and 0.675 for 90 lb, and Sakrete’s High Strength mix the same figures (rounding 90 lb to 0.68). The calculator divides your volume, with the extra included, by the yield of the bag you pick and rounds up: you can’t buy part of a bag. Full method

Sources

How it’s tested

One worked example for this page is checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Limits

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: draw any area and see bags on a pallet, yards or trucks, with 14 job and material pages and a shopping list kept on your device.

Every change on What’s new

How we make toolsReport a mistake

From volume to bags

A bag of concrete mix makes less concrete than its size suggests, because the dry mix is dense. The bag makers print the yield on their data sheets: QUIKRETE’s Concrete Mix gives 0.30 cubic feet for a 40 lb bag, 0.375 for 50 lb, 0.45 for 60 lb, 0.60 for 80 lb and 0.675 for 90 lb, and Sakrete’s High Strength mix the same figures (rounding 90 lb to 0.68). The calculator divides your volume, with the extra included, by the yield of the bag you pick and rounds up: you can’t buy part of a bag.

For a 4 × 4 ft pad 4 inches thick: 16 × 4 ÷ 12 = 5.33 cubic feet, 5.87 with 10% extra. That is 10 bags of 80 lb, 14 of 60 lb or 20 of 40 lb. Bigger bags mean fewer trips but heavier lifts; the weight of the whole order is shown under the pallet so you can plan the carrying.

Other bag products differ. Fast-setting mixes for posts yield about the same per pound (QUIKRETE’s 60 lb Fast Setting bag makes 0.45 cubic feet), while lightweight or high-yield products do not, so for anything not on the list, type the yield printed on your bag into More options.

bags = ⌈ volume (cu ft) × (1 + extra) ÷ yield per bag (cu ft) ⌉

Bags of concrete per cubic yard

Yields from the manufacturers’ data sheets. The 10 × 10 ft column is a slab 4 inches thick with 10% extra.

Yields from the manufacturers’ data sheets. The 10 × 10 ft column is a slab 4 inches thick with 10% extra.
BagYieldBags per cubic yardFor a 10 × 10 ft slabWeight per cubic yard
40 lb0.300 cu ft (8.5 L)901233,600 lb
50 lb0.375 cu ft (10.6 L)72983,600 lb
60 lb0.450 cu ft (12.7 L)60823,600 lb
80 lb0.600 cu ft (17.0 L)45623,600 lb
90 lb0.675 cu ft (19.1 L)40553,600 lb

Sources

QUIKRETE and Sakrete are trademarks of their owners; Binary Decimal is not affiliated with them. Their data sheets are cited for the yields printed on their bags.

Common questions

How many bags of concrete do I need for a 10 × 10 slab?

At 4 inches thick, a 10 × 10 ft slab is 33.3 cubic feet, 36.7 with 10% extra: 62 bags of 80 lb or 82 bags of 60 lb. That is over a ton of dry mix, so a ready-mix part load is worth pricing.

Is it better to buy 60 lb or 80 lb bags?

It is the same mix either way, so it comes down to lifting. An 80 lb bag makes a third more concrete per trip but is a heavy carry and a big batch for a small mixer; 60 lb bags are easier to handle and to mix by hand in a wheelbarrow. For post holes, many people use 50 lb bags of fast-setting mix.

How many bags of concrete are in a yard?

It depends on the bag: 45 bags of 80 lb, 60 of 60 lb, 72 of 50 lb or 90 of 40 lb make a cubic yard, from the yields on the data sheets. In metric, a cubic metre is about 72 bags of 30 kg.

How much water does a bag need?

QUIKRETE’s data sheet says about 6 pints (2.8 L) of water for an 80 lb bag of Concrete Mix, added gradually until the mix is workable. Too much water weakens the concrete, so start with less and follow the instructions on your bag.