Electricity Cost Calculator
Your appliances as a monthly bill, item by item, at your state’s or the UK price.
List your appliances with their watts and hours, and see the monthly bill they add up to, item by item, with what standby costs. Prices start at your state’s average or the UK price cap.
Your appliances
- Watts from its labelWh/7
- Amps × 120 VAh/7
3 A × 120 V = 360 W
- W
every hour, all year
Add an appliance: the watts are on its label or plug, a fridge’s yearly kWh on its energy label.
US average residential price, August 2026 (EIA). Pick your state for its own average.
More optionsStandby as its own line · no fixed charge
From your bill. A monthly charge ÷ 30.4 gives the daily one.
120 V for most US appliances (240 V for dryers and cooktops); 230 V in the UK and Europe.
ExampleMonthly bill
$17.24a month
94.93 kWh a month at 18.16¢ per kWh. Standby is 52% of the energy.
Edit the list to see your own bill.
- Standby, whole home$8.88
- Electric kettle$8.29
- Paper shredder$0.07
Hatched: standby, 52% of this list, $106.58 a year.
- A year
- $206.86
- Energy a year
- 1,139 kWh
- Standby a year
- $106.58
Prices as of August 2026 (US), October to December 2026 (UK); check the provider for current rates. An estimate from the numbers you enter: your bill’s own rate, tiers and fixed charges decide what you pay. Terms
Average price by stateResidential, August 2026, cents per kWh (EIA)
| State | ¢ per kWh |
|---|---|
| Alabama | 16.33 |
| Alaska | 29.41 |
| Arizona | 15.05 |
| Arkansas | 14.37 |
| California | 29.75 |
| Colorado | 17.17 |
| Connecticut | 24.51 |
| Delaware | 18.70 |
| District of Columbia | 25.98 |
| Florida | 14.99 |
| Georgia | 15.90 |
| Hawaii | 47.18 |
| Idaho | 13.37 |
| Illinois | 19.32 |
| Indiana | 17.02 |
| Iowa | 17.06 |
| Kansas | 15.47 |
| Kentucky | 13.80 |
| Louisiana | 12.87 |
| Maine | 32.11 |
| Maryland | 21.40 |
| Massachusetts | 30.48 |
| Michigan | 22.99 |
| Minnesota | 17.20 |
| Mississippi | 14.43 |
| Missouri | 16.02 |
| Montana | 15.57 |
| Nebraska | 13.54 |
| Nevada | 12.72 |
| New Hampshire | 27.64 |
| New Jersey | 24.61 |
| New Mexico | 16.51 |
| New York | 28.65 |
| North Carolina | 14.95 |
| North Dakota | 13.31 |
| Ohio | 19.38 |
| Oklahoma | 14.82 |
| Oregon | 15.92 |
| Pennsylvania | 21.77 |
| Rhode Island | 28.18 |
| South Carolina | 15.76 |
| South Dakota | 15.15 |
| Tennessee | 13.42 |
| Texas | 15.91 |
| Utah | 13.31 |
| Vermont | 23.84 |
| Virginia | 17.64 |
| Washington | 14.63 |
| West Virginia | 16.31 |
| Wisconsin | 19.41 |
| Wyoming | 14.43 |
| US average | 18.16 |
US Energy Information Administration, Electric Power Monthly, Table 5.6.A, released 23 October 2026. 2026 values are EIA’s preliminary estimates.
How this works: 5 sources,
How this works
Method
Each appliance’s energy is its watts times the hours it runs a day, divided by 1,000, times the days it runs (the US Department of Energy’s Energy Saver formula), plus its standby watts for every hour it is off. A month is a twelfth of a year of 365 days. The cost is the kWh times your price per kWh, plus any fixed daily charge; the price starts at EIA’s average residential price for the US or your state, or Ofgem’s price cap unit rate for Great Britain.
Sources
- Electric Power Monthly, Table 5.6.A (average residential price by state) (US Energy Information Administration, 2026)
- Energy price cap unit rates and standing charges, October to December 2026 (Ofgem, 2026)
- Energy Saver: Estimating Appliance and Home Electronic Energy Use (archived July 2026) (US Department of Energy)
- Whole-House Measurements of Standby Power Consumption (Ross and Meier) (Lawrence Berkeley National Laboratory, 2000)
- Standby Power: frequently asked questions (Lawrence Berkeley National Laboratory)
How it’s tested
11 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Limits
Prices as of August 2026 (US), October to December 2026 (UK); check the provider for current rates. An estimate from the numbers you enter: your bill’s own rate, tiers and fixed charges decide what you pay.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: your appliances as a monthly bill with the standby share, at US state or UK prices, plus kWh, appliance cost and watts to kWh pages.
Key facts
- The US average residential price of electricity was 18.16¢ per kWh in August 2026, from 12.72¢ in Nevada to 47.18¢ in Hawaii.
- Ofgem’s price cap sets a Great Britain average of 26.32p per kWh and a 54.83p daily standing charge for Direct Debit, 1 October to 31 December 2026.
- A 1,500 W kettle used an hour a day uses 547.5 kWh a year, the US Department of Energy’s own worked example.
- Standby power is typically 5 to 10% of home electricity use in developed countries, Lawrence Berkeley National Laboratory says.
EIA Electric Power Monthly, Table 5.6.A; Ofgem; US DOE Energy Saver; LBNL.
How a bill adds up
Every appliance turns watts into kilowatt-hours at the rate it draws power, for as long as it runs. Multiply its watts by the hours it runs in a day and divide by 1,000, and you have its kilowatt-hours for that day; multiply by the days it runs and you have a month or a year. Your utility charges a price for each of those kilowatt-hours, and the list above is that sum, one appliance at a time.
The map in the answer gives each appliance a tile sized by what it costs you, so the big items find you rather than the other way round. Something that draws a lot but runs for minutes (a kettle, a hair dryer) can cost less than something modest that never stops (a router, a freezer, a games console left on standby).
Where to find the watts
The wattage is usually printed on the appliance’s nameplate, on the back or underneath, or in its manual. That figure is the most it draws; many appliances use less on lower settings. If the label gives amps instead, multiply by the voltage: the Department of Energy’s example is a shredder rated 3 A on a 120 V US circuit, 360 W. Switch a row to amps and the calculator does it with 120 V in the US and 230 V in the UK.
Some appliances cycle. A refrigerator is plugged in all day but its compressor runs only part of the time, and the Department of Energy’s rule of thumb is to count a third of the hours it is plugged in at its nameplate wattage, which is why the fridge shortcut, which starts on the yearly kWh from its energy label, counts 8 hours a day if you switch it to watts. A plug-in electricity monitor measures the real figure for anything on a normal socket, cycling and standby included.
Standby: the part you don’t see
Many appliances keep drawing a little power when they look off: a clock, a remote-control receiver, a charger, a router. Lawrence Berkeley National Laboratory puts standby at typically 5 to 10% of home electricity use, and in ten California homes it measured, standby ran from 14 to 169 W, 67 W on average, or 5% to 26% of each home’s use for the year.
One watt drawn all year is 8.76 kWh, which is why small numbers add up. The example list includes LBNL’s 67 W average as one always-on line; replace it with your own, or give each appliance its standby watts under More options. Switching a power strip off cuts it completely.
The price per kWh
The price starts at the latest US average residential price from the US Energy Information Administration, 18.16¢ per kWh for August 2026; pick your state for its own average. In the UK it starts at the Great Britain average under Ofgem’s price cap for Direct Debit, 26.32p per kWh, with the 54.83p daily standing charge added. Your bill shows your own rate, and that is the number to type in.
Many tariffs are not one flat price: tiers that rise with use, time-of-use rates that are cheaper at night, and fixed monthly charges. For a tiered or time-of-use bill, use the price you pay for the extra kilowatt-hours, since that is what an appliance adds or saves.
Sources
- U.S. Energy Information Administration, Electric Power Monthly, Table 5.6.A: average price of electricity to ultimate customers by state (residential)
- Ofgem, Energy price cap unit rates and standing charges (1 October to 31 December 2026)
- US Department of Energy, Energy Saver: Estimating Appliance and Home Electronic Energy Use (archived 1 July 2026)
- Lawrence Berkeley National Laboratory, Standby Power: frequently asked questions
- Ross and Meier, Whole-House Measurements of Standby Power Consumption (Lawrence Berkeley National Laboratory, 2000)
All 3 calculators
Energy · Cost
Common questions
How do I calculate my electricity cost?
Multiply each appliance’s watts by the hours it runs a day and divide by 1,000 to get kilowatt-hours a day. Multiply by the days it runs in a month, then by your price per kWh. Adding every appliance gives the energy part of your bill; fixed or standing charges come on top.
What is the average price of electricity per kWh?
In the US, 18.16¢ per kWh for homes in August 2026 (EIA), from 12.72¢ in Nevada to 47.18¢ in Hawaii. In Great Britain, 26.32p per kWh under Ofgem’s price cap for Direct Debit from 1 October to 31 December 2026, plus a 54.83p daily standing charge.
Why is my real bill higher than the list?
Usually because the list leaves things out: heating and cooling, the water heater, lighting and anything always on. Fixed charges, taxes and tiered prices add more. Compare the kWh on your bill with the list’s total kWh to see how much is still missing.
How much does standby power cost?
Each watt drawn all year is 8.76 kWh, about $1.59 a year at the US average price. Lawrence Berkeley National Laboratory measured 14 to 169 W of standby in ten California homes, 67 W on average, about $107 a year at today’s US average.
Is anything I type sent anywhere?
No. The arithmetic runs in your browser. The list is kept in the page’s address so a link brings it back, and the names you give appliances are only in that link.