Tire Size Calculator
Tire diameter, sidewall and width from the size, with a second size drawn to scale.
Type a tire size as it is printed on the sidewall and see its diameter, width, sidewall and revolutions per mile, drawn to scale beside a second size you are thinking of.
As printed on the sidewall, such as 225/45R17 or 33x12.50R15.
The size you are thinking of fitting.
225/45R17 diameter
634.3mm
24.97 in tall, 225 mm wide, with 101.3 mm of sidewall on a 17-inch rim.
| mm | 225/45R17 | 235/45R17 | Change |
|---|---|---|---|
| Overall diameter | 634.3 | 643.3 | +1.4% |
| Section width | 225 | 235 | +4.4% |
| Sidewall height | 101.3 | 105.8 | +4.4% |
| Rim diameter | 431.8 | 431.8 | 0% |
| Circumference | 1,992.7 | 2,021 | +1.4% |
| Revolutions per mile | 807.6 | 796.3 | −1.4% |
| Revolutions per km | 501.8 | 494.8 | −1.4% |
When the speedometer shows 100 km/h, you are doing 101.4 km/h, assuming it read true on the 225/45R17.
- Against 235/45R17
- +1.42% diameter
- Revolutions per mile
- 807.6
Design dimensions from the size printed on the tire; real tires vary a little by brand, rim width, pressure and wear. Check fitment, load index and speed rating with your tire shop. Terms
How this works: 5 sources,
How this works
Method
A metric size such as 225/45R17 gives the section width in mm, the sidewall as a percentage of it and the rim in inches, so the overall diameter is rim × 25.4 + 2 × width × aspect ÷ 100; flotation sizes such as 33x12.50R15 give the diameter in inches. Comparisons divide one diameter by the other: the speedometer error, odometer error and change in gearing all follow that ratio, assuming the speedometer read true on the original tires. Wheel positions use backspacing = (width + 1 inch) ÷ 2 + offset.
Sources
- ISO 4000-1, Passenger car tyres and rims: Part 1, Tyres (metric series) (International Organization for Standardization, 2024)
- ETRTO Standards Manual (tyre designation and dimensions) (European Tyre and Rim Technical Organisation)
- International yard and pound agreement (1 inch = 25.4 mm, 1 mile = 1,609.344 m) (US National Bureau of Standards, 1959)
- UN Regulation No. 39: speedometer and odometer equipment (UNECE)
- Wheel offset vs. backspacing explained (Speedway Motors)
How it’s tested
13 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Limits
Design dimensions from the size printed on the tire; real tires vary a little by brand, rim width, pressure and wear. Check fitment, load index and speed rating with your tire shop.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: tire dimensions from the size, two sizes drawn to scale, speedometer error dials, wheel offset and backspacing, plus sizing and effective gear ratio.
Key facts
- A 225/45R17 tire is 225 mm wide with a sidewall 45% as tall (101.25 mm), on a 17-inch rim: 634.3 mm or 24.97 inches tall.
- Overall diameter = rim diameter × 25.4 + 2 × width × aspect ratio ÷ 100, in millimetres.
- A taller tire makes the speedometer read low: 3% more diameter means 100 on the dial is really 103.
- Flotation sizes such as 33x12.50R15 give the overall diameter (33 inches), the width (12.5 inches) and the rim (15 inches) directly.
ISO 4000-1 and the ETRTO Standards Manual (metric tyre designation); 1 inch = 25.4 mm exactly.
All 5 calculators
Tires · Wheels and gearing
Reading the size on the sidewall
Metric tire sizes follow one pattern worldwide, set out by ISO 4000-1 and the European Tyre and Rim Technical Organisation (ETRTO): width in millimetres, a slash, the aspect ratio, a letter for the construction (R for radial), and the rim diameter in inches. The odd mix of units is historical, and it is why every calculation here starts by turning the rim into millimetres: one inch is exactly 25.4 mm.
Off-road and light truck tires are also sold in flotation sizes, which skip the arithmetic: 33x12.50R15 is 33 inches tall, 12.5 inches wide, for a 15-inch rim. The calculator reads both, and anything printed after the size (load index, speed rating, an E for load range) is ignored.
What changes when the size changes
Diameter is the number that matters most. A taller tire lifts the car by half the difference, turns fewer times per mile, so the speedometer and odometer read low, and makes the gearing taller, so the engine turns slower at the same speed. A shorter tire does the opposite.
Width changes how far the tire reaches toward the suspension and the fender, and with the wheel offset decides whether it rubs. The pages here cover each question: comparing two sizes, the speedometer, wheel offset and backspacing, plus sizing to bigger rims, and gear ratio.
Sources
- ISO 4000-1, Passenger car tyres and rims: Part 1, Tyres (metric series), International Organization for Standardization, 2024
- ETRTO Standards Manual (tyre designation and dimensions), European Tyre and Rim Technical Organisation
- International yard and pound agreement (1 inch = 25.4 mm, 1 mile = 1,609.344 m), US National Bureau of Standards, 1959
- UN Regulation No. 39: speedometer and odometer equipment, UNECE
- Wheel offset vs. backspacing explained, Speedway Motors
Common questions
How do I read a tire size?
In 225/45R17, 225 is the section width in millimetres, 45 the aspect ratio (the sidewall is 45% of the width), R means radial construction and 17 is the rim diameter in inches. A letter in front, P or LT, marks a passenger or light truck tire; numbers and a letter after it, such as 94W, are the load index and speed rating.
How tall is a 225/45R17 tire?
634.3 mm, or 24.97 inches: a 431.8 mm rim plus two 101.25 mm sidewalls.
Can I fit a different tire size?
Often, if the overall diameter stays close to the original, the tire clears the suspension and bodywork at full lock and full compression, and its load index and speed rating are at least those on the door placard. A tire shop can check fitment on your car.
Why does the real tire measure a little different?
The size gives design dimensions on a standard measuring rim. Real tires vary by brand and tread pattern, grow slightly when inflated, shrink as the tread wears, and change with rim width. Use the calculator for comparisons; measure for tight clearances.