Tire Gear Ratio Calculator
Taller tires act like a numerically lower axle ratio…
Taller tires act like a numerically lower axle ratio: fewer engine revs at the same speed. See the effective ratio, the engine speed at cruise before and after, and which ratio would bring the original rpm back.
As printed on the sidewall, such as 225/45R17 or 33x12.50R15.
As printed on the sidewall, such as 225/45R17 or 33x12.50R15.
The axle ratio is on the door sticker or axle tag (3.73, 4.10). The gear ratio is the one you cruise in: top gear is often below 1 (0.69 overdrive), 1.00 for direct drive.
3.73 gears on 35x12.50R17
3.37effective ratio
At 100 km/h the engine turns 1,540 rpm instead of 1,700. A 4.13 axle ratio would bring the original back.
- Tire diameter
- 31.6 → 35 in
Design dimensions from the size printed on the tire; real tires vary a little by brand, rim width, pressure and wear. Check fitment, load index and speed rating with your tire shop. Terms
How this works: 5 sources,
How this works
Method
The engine turns the wheels through the gearbox and the axle. At a given road speed, the wheel turns once per circumference travelled, so engine rpm = road speed ÷ circumference × axle ratio × gear ratio. In US units that is rpm = mph × axle × gear × 336.14 ÷ tire diameter in inches, where 336.14 is 63,360 inches in a mile divided by 60 × π. Full method
Sources
- International yard and pound agreement (1 inch = 25.4 mm, 1 mile = 1,609.344 m) (US National Bureau of Standards, 1959)
- ISO 4000-1, Passenger car tyres and rims: Part 1, Tyres (metric series) (International Organization for Standardization, 2024)
- ETRTO Standards Manual (tyre designation and dimensions) (European Tyre and Rim Technical Organisation)
- UN Regulation No. 39: speedometer and odometer equipment (UNECE)
- Wheel offset vs. backspacing explained (Speedway Motors)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Limits
Design dimensions from the size printed on the tire; real tires vary a little by brand, rim width, pressure and wear. Check fitment, load index and speed rating with your tire shop.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: tire dimensions from the size, two sizes drawn to scale, speedometer error dials, wheel offset and backspacing, plus sizing and effective gear ratio.
Worked example: 245/75R16 to 285/75R16 on 3.55 gears
The diameters are 773.9 mm (30.5 in) and 833.9 mm (32.8 in). The effective ratio is 3.55 × 773.9 ÷ 833.9 = 3.29, and the ratio that restores stock behaviour is 3.55 × 833.9 ÷ 773.9 = 3.83.
In a 1:1 top gear at 65 mph the engine turns 2,546 rpm on the small tire and 2,363 rpm on the big one.
How tire size changes gearing
The engine turns the wheels through the gearbox and the axle. At a given road speed, the wheel turns once per circumference travelled, so engine rpm = road speed ÷ circumference × axle ratio × gear ratio. In US units that is rpm = mph × axle × gear × 336.14 ÷ tire diameter in inches, where 336.14 is 63,360 inches in a mile divided by 60 × π.
A taller tire is like a lower (numerically smaller) axle ratio: effective ratio = axle × old diameter ÷ new diameter. The engine turns slower at the same speed, which helps highway noise but costs acceleration and towing, and can keep an automatic out of its top gear on hills.
To get the original feel back, re-gear to axle × new diameter ÷ old diameter, then pick the nearest ratio made for your axle.
rpm = mph × axle × gear × 336.14 ÷ diameter (in) · effective = axle × old ÷ new
- 1 mile = 63,360 inches exactly, which gives the 336.14 in the rpm formula. Source: International yard and pound agreement (1 inch = 25.4 mm, 1 mile = 1,609.344 m), US National Bureau of Standards, 1959.
Ratio to restore stock gearing
From 31.6-inch (265/70R17) tires on common axle ratios.
| Stock axle | 33″ | 35″ | 37″ | 40″ |
|---|---|---|---|---|
| 3.21 | 3.35 | 3.55 | 3.76 | 4.06 |
| 3.42 | 3.57 | 3.79 | 4.00 | 4.33 |
| 3.55 | 3.71 | 3.93 | 4.16 | 4.49 |
| 3.73 | 3.89 | 4.13 | 4.37 | 4.72 |
| 3.92 | 4.09 | 4.34 | 4.59 | 4.96 |
| 4.10 | 4.28 | 4.54 | 4.80 | 5.19 |
| 4.30 | 4.49 | 4.76 | 5.03 | 5.44 |
| 4.56 | 4.76 | 5.05 | 5.34 | 5.77 |
| 4.88 | 5.10 | 5.40 | 5.71 | 6.18 |
Sources
- International yard and pound agreement (1 inch = 25.4 mm, 1 mile = 1,609.344 m), US National Bureau of Standards, 1959
- ISO 4000-1, Passenger car tyres and rims: Part 1, Tyres (metric series), International Organization for Standardization, 2024
Common questions
Do I need to re-gear for 35-inch tires?
Not always. Expect slower acceleration and more downshifts on hills and when towing. The dials show how far your cruise rpm drops, and the table the ratio that would restore it.
What gear ratio for 37-inch tires?
For a truck that came with 3.73s on 31.6-inch tires, 3.73 × 37 ÷ 31.6 = about 4.37, so you would look at the ratios made just above that for your axle, such as 4.56.
Does the gearbox ratio matter?
Only for the rpm, not the effective axle ratio. Enter the gear you cruise in: the overdrive ratio for highway speeds.