Skip to content

Kinematics Calculator (SUVAT)

Type any three of s, u, v, a and t. The other two appear, with a moving diagram.

Type any three of displacement, initial velocity, final velocity, acceleration and time to get the other two, with a moving motion diagram, its graphs and the working.

Fill in any three. The other two are worked out; typing a fourth replaces the first you typed.

ExampleDisplacement

401.9m

Starting from rest, speeding up at 26 m/s², it covers 401.9 m in 5.56 s and ends at 144.6 m/s.

Enter your own values to see your result.

starts = 401.9 m

At 5.56 s: 401.9 m from the start, moving at 144.6 m/s

1450v (m/s)t = 5.56 s0area = 401.9 m
Final velocity
144.6 m/s (323.4 mph)
In US units
1,318 ft
Average velocity
72.28 m/s (161.7 mph)
Try
How this works: 9 sources,

How this works

Method

With constant acceleration, the five quantities s (displacement), u (initial velocity), v (final velocity), a (acceleration) and t (time) are linked by five equations, each leaving one out: v = u + at, s = ut + ½at², s = ½(u + v)t, v² = u² + 2as and s = vt − ½at². Any three values give the other two; values are converted to SI units first. Falls with air resistance add the drag force ½ρCdAv², with terminal velocity √(2mg ÷ ρCdA) and the closed-form fall from rest.

How it’s tested

21 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: the SUVAT solver with a moving motion diagram and graphs, plus velocity, acceleration, displacement, free fall, terminal velocity and average speed pages.

Every change on What’s new

How we make toolsReport a mistake

Key facts

  • A dragster accelerating from rest at 26.0 m/s² for 5.56 s covers 402 m, about a quarter mile, and ends at 145 m/s (OpenStax Example 3.8).
  • Each of the five constant-acceleration equations leaves out one of s, u, v, a and t, so any three values give the other two.
  • Standard gravity is exactly 9.80665 m/s², the acceleration of a free fall with no air resistance used as a reference.

Sources: OpenStax University Physics Volume 1, §3.4; NIST, CODATA 2022

All 6 calculators

Speed and acceleration · Falling

The five equations

Each leaves out one quantity. Pick the one without the value you neither know nor want.

The SUVAT equations
EquationLeaves outUse it for
1v = u + atsSpeed after a time
2s = ut + ½at²vDistance in a time
3s = ½(u + v)taDistance from the two speeds
4v² = u² + 2astSpeed after a distance, stopping distances
5s = vt − ½at²uDistance when you know the end speed

All five come from two facts. With steady acceleration, velocity rises in a straight line, v = u + at; and the distance covered is the average velocity times the time, s = ½(u + v)t. Put the first into the second and you get s = ut + ½at²; take t out of them and you get v² = u² + 2as. The fifth is the second written from the end of the motion instead of the start.

The graph under the answer shows the same thing. On the velocity-time graph, the slope of the line is the acceleration and the shaded area under it is the displacement. On the position-time graph, the curve gets steeper as the object speeds up, and its slope at any moment is the velocity then.

Signs, units and turning round

  • Choose a positive direction, usually the way the object starts moving, and give everything going the other way a minus sign. A car braking has a negative acceleration.
  • Mixing units is fine: type km/h, mph, feet or minutes and the calculator converts to metres and seconds before solving, then shows the answer in your units and the other system’s.
  • When the velocity changes sign, the object has turned round. The displacement is then shorter than the distance travelled, and the motion diagram draws the way back on a second lane.
  • Time is always positive. If an answer would need a negative time, the calculator says the motion can’t happen with those signs.

Sources

Example numbers are from OpenStax’s worked examples, cited by number; the explanations here are our own.

Common questions

What are the SUVAT equations?

Five equations for motion with constant acceleration, named after their letters: s displacement, u initial velocity, v final velocity, a acceleration and t time. Each one leaves out one of the five, so with any three known there is always an equation that gives a fourth directly.

How do I use the calculator?

Type any three of the five values, in whichever units you have. The other two are worked out at once and shown in their fields. Type in a fourth field and the calculator lets go of the oldest of the three you typed, so you can work backwards from any answer.

When do the SUVAT equations not work?

When the acceleration changes along the way: a car whose engine pulls less at speed, anything slowed by air resistance at high speed, or a spring. Over a short enough stretch the acceleration is nearly constant and the equations are a good approximation; for falls with drag, use the free fall page with air resistance on.

Why does it sometimes give two answers?

With a known displacement and acceleration but no time, an object can pass the same point twice: a ball thrown up passes a given height on the way up and again on the way down. The calculator shows the first time and lists the other as “Also reached”.

Which direction is positive?

The one you choose, usually the direction the object starts moving. Everything in the other direction gets a minus sign: braking while moving forwards is a negative acceleration, and for a vertical throw with up positive, gravity is −9.81 m/s².