Terminal Velocity Calculator
The fastest a falling object gets, when air drag grows to match its weight.
The fastest a falling object gets, when air drag grows to match its weight. Set the mass, shape and size, and see how quickly it gets there.
Air, height and gravityAir at 1.21 kg/m³, g = 9.80665 m/s², and the speed after a 3000 m fall
0 to drop it; up is +, down is −.
ExampleTerminal velocity
44.37m/s
With these numbers it falls no faster than 44.37 m/s (99.24 mph). It reaches 95% of that after 8.29 s and 233.6 m of falling.
Enter your own values to see your result.
- After 3,000 m
- 44.4 m/s at 70.8 s
- In km/h and mph
- 160 km/h · 99.2 mph
- With no air, after the same fall
- 243 m/s
How this works: 9 sources,
How this works
Method
Air pushes back on a falling object with a drag force of ½ρCdAv²: air density times drag coefficient times frontal area times speed squared, halved. As the object speeds up, drag grows until it equals the weight, mg. Then the net force is zero, and the speed stops rising. Setting ½ρCdAv² = mg and solving for v gives the terminal velocity, vt = √(2mg ÷ ρCdA), the formula NASA’s Glenn Research Center gives. Full method
Sources
- OpenStax University Physics Volume 1, §6.4 Drag Force and Terminal Speed
- NASA Glenn Research Center, Terminal Velocity
- OpenStax University Physics Volume 1, §3.1 Position, Displacement, and Average Velocity (2016)
- OpenStax University Physics Volume 1, §3.3 Average and Instantaneous Acceleration (2016)
- OpenStax University Physics Volume 1, §3.4 Motion with Constant Acceleration (2016)
- OpenStax University Physics Volume 1, §3.5 Free Fall (2016)
- CODATA 2022: standard acceleration of gravity (NIST, CODATA 2022)
- The Drag Equation (NASA Glenn Research Center)
- Guide for the Use of the SI, Appendix B.8 (conversion factors) (NIST, SP 811)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: the SUVAT solver with a moving motion diagram and graphs, plus velocity, acceleration, displacement, free fall, terminal velocity and average speed pages.
How terminal velocity is worked out
Air pushes back on a falling object with a drag force of ½ρCdAv²: air density times drag coefficient times frontal area times speed squared, halved. As the object speeds up, drag grows until it equals the weight, mg. Then the net force is zero, and the speed stops rising. Setting ½ρCdAv² = mg and solving for v gives the terminal velocity, vt = √(2mg ÷ ρCdA), the formula NASA’s Glenn Research Center gives.
For an 85 kg skydiver spread out, with Cd = 1.0, an area of 0.70 m² and air at 1.21 kg/m³, that is √(2 × 85 × 9.8 ÷ (1.21 × 1.0 × 0.70)) = 44.4 m/s, about 160 km/h (OpenStax Example 6.17). Diving feet first shrinks both the area and the drag coefficient: a 75 kg diver at 0.18 m² and Cd = 0.70 reaches 98 m/s, more than twice as fast.
The approach is quick at first and slow at the end: from rest the speed follows v = vt·tanh(gt ÷ vt), reaching 95% of terminal velocity after (vt ÷ g)·artanh(0.95), 8.3 s for the spread-out skydiver, after falling about 233 m. A 1,000 m fall from rest takes 25.7 s instead of 14.3 s in a vacuum.
vt = √(2mg ÷ ρCdA) · v(t) = vt·tanh(gt ÷ vt)
- Typical drag coefficients range from 0.05 for an airfoil and 0.45 for a sphere to 0.70 for a skydiver feet first and 1.0 spread out. Source: OpenStax University Physics Volume 1, §6.4 Drag Force and Terminal Speed.
- Terminal velocity is reached when the drag equals the weight of the object, so the net force and the acceleration are zero. Source: NASA Glenn Research Center, Terminal Velocity.
Terminal velocity of an 85 kg skydiver
For two body positions and a range of frontal areas, in air at 1.21 kg/m³ under standard gravity. Drag coefficients from OpenStax Table 6.2.
| Area facing the air | Feet first (Cd 0.70) | Spread out (Cd 1.0) |
|---|---|---|
| 0.18 m² (1.94 ft²) | 105 m/s · 376 km/h | 87.5 m/s · 315 km/h |
| 0.25 m² (2.69 ft²) | 88.7 m/s · 319 km/h | 74.2 m/s · 267 km/h |
| 0.3 m² (3.23 ft²) | 81 m/s · 292 km/h | 67.8 m/s · 244 km/h |
| 0.4 m² (4.31 ft²) | 70.1 m/s · 253 km/h | 58.7 m/s · 211 km/h |
| 0.5 m² (5.38 ft²) | 62.7 m/s · 226 km/h | 52.5 m/s · 189 km/h |
| 0.6 m² (6.46 ft²) | 57.3 m/s · 206 km/h | 47.9 m/s · 173 km/h |
| 0.7 m² (7.53 ft²) | 53 m/s · 191 km/h | 44.4 m/s · 160 km/h |
| 0.8 m² (8.61 ft²) | 49.6 m/s · 179 km/h | 41.5 m/s · 149 km/h |
| 1 m² (10.8 ft²) | 44.4 m/s · 160 km/h | 37.1 m/s · 134 km/h |
| 1.2 m² (12.9 ft²) | 40.5 m/s · 146 km/h | 33.9 m/s · 122 km/h |
Common questions
What is the terminal velocity of a human?
It depends on weight, size and position. With the textbook’s numbers, an 85 kg skydiver spread out reaches about 44 m/s (160 km/h), and a 75 kg diver feet first about 98 m/s, because feet first shrinks both the area and the drag coefficient. Enter your own mass and an area to see yours.
Why do heavier objects have a higher terminal velocity?
Because the drag has to grow larger to balance a larger weight, and it only does that at a higher speed. Doubling the mass at the same size raises terminal velocity by √2, about 41%.
How long does it take to reach terminal velocity?
Strictly, never: the speed creeps closer forever. The calculator gives the time to 95%, (vt ÷ g)·artanh(0.95), about 1.83 × vt ÷ g. For the 85 kg skydiver that is 8.3 s, and 99% takes 12 s.
Does air density matter?
Yes, terminal velocity goes as 1 ÷ √ρ. High up the air is thinner, so skydivers jumping from very high altitude fall much faster at first and slow down as they reach denser air.