Skip to content

Velocity Calculator

How fast something is going at the end: from where it started…

How fast something is going at the end: from where it started, how hard it sped up or slowed down, and for how long or how far. At a steady speed it is just distance over time.

v = u + at

ExampleFinal velocity

10m/s

Starting at 70 m/s, slowing at 1.5 m/s², it covers 1,600 m in 40 s and ends at 10 m/s.

Enter your own values to see your result.

starts = 1,600 m

At 40 s: 1,600 m from the start, moving at 10 m/s

700v (m/s)t = 40 s0area = 1,600 m
Displacement
1,600 m (5,249 ft)
In US units
22.37 mph
Average velocity
40 m/s (89.48 mph)
How this works: 9 sources,

How this works

Method

When the acceleration is steady, velocity changes by the same amount every second, so the final velocity is the starting velocity plus acceleration times time: v = u + at. A plane that touches down at 70.0 m/s and brakes at 1.50 m/s² for 40.0 s loses 1.50 × 40.0 = 60.0 m/s and rolls on at 10 m/s (OpenStax Example 3.7 uses these numbers). Full method

How it’s tested

3 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: the SUVAT solver with a moving motion diagram and graphs, plus velocity, acceleration, displacement, free fall, terminal velocity and average speed pages.

Every change on What’s new

How we make toolsReport a mistake

How to work out final velocity

When the acceleration is steady, velocity changes by the same amount every second, so the final velocity is the starting velocity plus acceleration times time: v = u + at. A plane that touches down at 70.0 m/s and brakes at 1.50 m/s² for 40.0 s loses 1.50 × 40.0 = 60.0 m/s and rolls on at 10 m/s (OpenStax Example 3.7 uses these numbers).

If you know the distance instead of the time, use v² = u² + 2as, the one equation without t. A car joining a freeway at 10.0 m/s and speeding up at 2.00 m/s² over a 200 m ramp reaches √(10² + 2 × 2 × 200) = 30 m/s, about 108 km/h, and needs 10 s to do it.

With no acceleration at all, velocity is simply distance over time, the same at every moment. That is the third route in the calculator. If the speed varied along the way, distance over time gives the average speed instead, which the average speed page works out leg by leg.

v = u + at · v² = u² + 2as · steady: v = s ÷ t

Speed after speeding up from rest

v = at from a standing start, in m/s and km/h, for four steady accelerations: a gentle bus, a brisk car, free fall (standard gravity) and a top-fuel dragster.

v = at from a standing start, in m/s and km/h, for four steady accelerations: a gentle bus, a brisk car, free fall (standard gravity) and a top-fuel dragster.
TimeAt 1.5 m/s²At 4 m/s²At 9.81 m/s²At 26 m/s²
1 s1.5 m/s · 5.4 km/h4 m/s · 14.4 km/h9.81 m/s · 35.3 km/h26 m/s · 93.6 km/h
2 s3 m/s · 10.8 km/h8 m/s · 28.8 km/h19.6 m/s · 70.6 km/h52 m/s · 187 km/h
3 s4.5 m/s · 16.2 km/h12 m/s · 43.2 km/h29.4 m/s · 106 km/h78 m/s · 281 km/h
4 s6 m/s · 21.6 km/h16 m/s · 57.6 km/h39.2 m/s · 141 km/h104 m/s · 374 km/h
5 s7.5 m/s · 27 km/h20 m/s · 72 km/h49 m/s · 177 km/h130 m/s · 468 km/h
6 s9 m/s · 32.4 km/h24 m/s · 86.4 km/h58.8 m/s · 212 km/h156 m/s · 562 km/h
8 s12 m/s · 43.2 km/h32 m/s · 115 km/h78.5 m/s · 282 km/h208 m/s · 749 km/h
10 s15 m/s · 54 km/h40 m/s · 144 km/h98.1 m/s · 353 km/h260 m/s · 936 km/h
15 s22.5 m/s · 81 km/h60 m/s · 216 km/h147 m/s · 530 km/h390 m/s · 1,404 km/h
20 s30 m/s · 108 km/h80 m/s · 288 km/h196 m/s · 706 km/h520 m/s · 1,872 km/h

Common questions

What is the difference between speed and velocity?

Speed is how fast; velocity is how fast and which way. Going 20 m/s north and 20 m/s south are the same speed but opposite velocities, so in the calculator one of them is +20 and the other −20.

How do I find final velocity without time?

Use v² = u² + 2as with the distance: pick “From u, a, s”. It gives the size of v; the calculator takes the positive root unless the motion has reversed, and says when an object passes the same point twice.

Why is my final velocity negative?

Because the object has turned round. If something starts at +10 m/s with an acceleration of −2 m/s², after 5 s it stops and after 8 s it is moving at −6 m/s, back the way it came. The motion diagram draws the way back on a second lane.

Does this work for falling objects?

Yes, with a = −9.81 m/s² (up positive) as long as air resistance is small. For long falls, where drag matters, use the free fall page with air resistance on.