Average Speed Calculator
Your average speed is the total distance over the total time…
Your average speed is the total distance over the total time, not the average of the speeds. Add each leg of a trip, by its time or its speed, and see why.
ExampleAverage speed
48km/h
240 km in 5 h. The legs’ speeds average 50 km/h, but more of the time goes at the slower speeds, so the trip averages 48 km/h.
Enter your own trip to see your result.
Each leg is a line whose slope is its speed; the dashed line is the average.
- Total time
- 5 h
- Plain average of the speeds
- 50 km/h
- In mph
- 29.8 mph
How this works: 9 sources,
How this works
Method
Average speed is the total distance divided by the total time. It is not the average of the speeds, unless every leg takes the same time. Drive 120 km at 60 km/h and the same 120 km back at 40 km/h: the first leg takes 2 hours, the second 3, so you cover 240 km in 5 hours, 48 km/h. The slow leg lasts longer, so it pulls the average down more than the fast leg pulls it up. Full method
Sources
- OpenStax University Physics Volume 1, §3.1 Position, Displacement, and Average Velocity
- NIST, Guide for the Use of the SI, Appendix B.8 (conversion factors)
- OpenStax University Physics Volume 1, §3.3 Average and Instantaneous Acceleration (2016)
- OpenStax University Physics Volume 1, §3.4 Motion with Constant Acceleration (2016)
- OpenStax University Physics Volume 1, §3.5 Free Fall (2016)
- OpenStax University Physics Volume 1, §6.4 Drag Force and Terminal Speed (2016)
- CODATA 2022: standard acceleration of gravity (NIST, CODATA 2022)
- The Drag Equation (NASA Glenn Research Center)
- Terminal Velocity (NASA Glenn Research Center)
How it’s tested
3 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: the SUVAT solver with a moving motion diagram and graphs, plus velocity, acceleration, displacement, free fall, terminal velocity and average speed pages.
How to work out average speed
Average speed is the total distance divided by the total time. It is not the average of the speeds, unless every leg takes the same time. Drive 120 km at 60 km/h and the same 120 km back at 40 km/h: the first leg takes 2 hours, the second 3, so you cover 240 km in 5 hours, 48 km/h. The slow leg lasts longer, so it pulls the average down more than the fast leg pulls it up.
For two legs of equal distance the answer is the harmonic mean, 2ab ÷ (a + b), always a little below the plain average. That is why no speed on the way back can make a round trip average twice the speed of the way out: you would need to come back in no time at all.
Average velocity is different again: displacement over time, with direction. Delivering flyers, a paper round of 0.5 km east, 0.5 km west, 1.0 km east and 1.75 km west in 58 minutes covers 3.75 km, an average speed of 3.88 km/h, but ends 0.75 km west of the start, an average velocity of only 0.78 km/h west (OpenStax Example 3.1).
average speed = total distance ÷ total time · equal distances: 2ab ÷ (a + b)
- Average velocity is displacement over elapsed time, while average speed is total distance over elapsed time; they differ whenever the motion reverses. Source: OpenStax University Physics Volume 1, §3.1 Position, Displacement, and Average Velocity.
- One mile is exactly 1,609.344 m, so 1 mph is exactly 0.44704 m/s. Source: NIST, Guide for the Use of the SI, Appendix B.8 (conversion factors).
Round trips at two speeds
The same distance out and back at different speeds: the plain average of the two speeds against the true average speed for the trip.
| Out | Back | Average of the speeds | Average speed |
|---|---|---|---|
| 60 km/h | 40 km/h | 50 km/h | 48 km/h |
| 50 km/h | 50 km/h | 50 km/h | 50 km/h |
| 100 km/h | 50 km/h | 75 km/h | 66.7 km/h |
| 120 km/h | 60 km/h | 90 km/h | 80 km/h |
| 80 km/h | 20 km/h | 50 km/h | 32 km/h |
| 90 km/h | 30 km/h | 60 km/h | 45 km/h |
| 70 km/h | 50 km/h | 60 km/h | 58.3 km/h |
| 110 km/h | 90 km/h | 100 km/h | 99 km/h |
| 65 km/h | 35 km/h | 50 km/h | 45.5 km/h |
| 100 km/h | 25 km/h | 62.5 km/h | 40 km/h |
Common questions
Why isn’t average speed the average of the speeds?
Because you spend more time at the slower speeds. Averaging speeds counts each leg equally; average speed weights each by how long it lasts. They only agree when every leg takes the same time.
How do I include a stop?
Add a leg with a distance of 0, by time, for as long as you stopped. It adds time but no distance, so it lowers the average speed, as stops do on a real trip.
What is the difference between average speed and average velocity?
Average speed uses the whole distance travelled; average velocity uses the displacement, from the start to the end. On a round trip back to where you started, the average velocity is zero however fast you went.