Skip to content

Acceleration Calculator

How quickly velocity changes: the change in velocity divided by the time it took…

How quickly velocity changes: the change in velocity divided by the time it took, or worked out from the distance it took. Slowing down comes out negative.

a = (v − u) ÷ t

ExampleAcceleration

8.333m/s²

Starting from rest, speeding up at 8.333 m/s², it covers 13.5 m in 1.8 s and ends at 15 m/s.

Enter your own values to see your result.

starts = 13.5 m

At 1.8 s: 13.5 m from the start, moving at 15 m/s

150v (m/s)t = 1.8 s0area = 13.5 m
Displacement
13.5 m (44.29 ft)
In US units
27.34 ft/s²
Average velocity
7.5 m/s (16.78 mph)
How this works: 9 sources,

How this works

Method

Acceleration is the change in velocity divided by the time it takes: a = (v − u) ÷ t. A racehorse that leaves the gate and reaches 15.0 m/s in 1.80 s accelerates at 15.0 ÷ 1.80 = 8.33 m/s² (OpenStax Example 3.5 measures it heading west, so it prints −8.33 m/s²). The unit, metres per second per second, says how many metres per second are gained each second. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: the SUVAT solver with a moving motion diagram and graphs, plus velocity, acceleration, displacement, free fall, terminal velocity and average speed pages.

Every change on What’s new

How we make toolsReport a mistake

How to calculate acceleration

Acceleration is the change in velocity divided by the time it takes: a = (v − u) ÷ t. A racehorse that leaves the gate and reaches 15.0 m/s in 1.80 s accelerates at 15.0 ÷ 1.80 = 8.33 m/s² (OpenStax Example 3.5 measures it heading west, so it prints −8.33 m/s²). The unit, metres per second per second, says how many metres per second are gained each second.

When you know the distance but not the time, use a = (v² − u²) ÷ 2s. A car stopping from 30.0 m/s in 64.3 m decelerates at (0 − 30²) ÷ (2 × 64.3) = −7 m/s²: negative, because it slows down while moving in the positive direction.

Dividing by standard gravity, 9.80665 m/s², gives acceleration in g. A car that goes from 0 to 60 mph in 6.0 s averages 4.47 m/s², or 0.46 g; the dragster in the hub example pulls 2.65 g. These are averages over the run: real cars pull hardest at low speed.

a = (v − u) ÷ t · a = (v² − u²) ÷ 2s · a = 2(s − ut) ÷ t²

0 to 60 mph times as acceleration

The average acceleration of a run from 0 to 60 mph (26.82 m/s, 96.6 km/h) in each time, in m/s² and in g.

The average acceleration of a run from 0 to 60 mph (26.82 m/s, 96.6 km/h) in each time, in m/s² and in g.
0 to 60 mph inm/s²g0 to 100 km/h in
2.5 s10.71.12.59 s
3 s8.940.913.11 s
3.5 s7.660.783.62 s
4 s6.710.684.14 s
5 s5.360.555.18 s
6 s4.470.466.21 s
7 s3.830.397.25 s
8 s3.350.348.28 s
10 s2.680.2710.4 s
12 s2.240.2312.4 s
Show all 11 rows
15 s1.790.1815.5 s

Common questions

Can acceleration be negative?

Yes. Negative acceleration points the other way to the direction you called positive. If the object is moving the positive way, it slows down; if it is already moving the negative way, it speeds up. “Deceleration” usually means slowing down whatever the sign.

How do I convert acceleration to g?

Divide by 9.80665 m/s², or switch the unit to g. One g is the acceleration of a free fall near the Earth with no air, so 2 g is twice that and feels like twice your weight pressing you into the seat.

Is this average or instantaneous acceleration?

Average, over the stretch you enter. The equations assume it stays the same throughout; if it doesn’t, the answer is still the right average, but distances worked out from it will be off.