Skip to content

Board Foot Calculator

Board feet and cost for your lumber list, from the nominal sizes lumber is sold by.

Board feet for a lumber list, from the nominal sizes lumber is sold by, and the cost at your price. Then cut lists for sheets and boards, studs for a wall, and what lumber really measures.

in
in
ft
in
in
ft
in
in
ft

Nominal sizes, as lumber is sold and tallied: a 2×4 is 2 × 4 here, though it measures 1½ × 3½.

$

ExampleBoard feet

229.33board feet

15 pieces, 172 linear feet.

Enter yours to see your result.

  • 9 × 2×8 × 12 ft144 bd ft
  • 2 × 2×8 × 16 ft42.7 bd ft
  • 4 × 4×4 × 8 ft42.7 bd ft
Cubic feet
19.11
Cubic metres
0.541

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms

My shopping list

Add each part of a job and print one list. It stays on this device.

How this works: 1 source,

How this works

Method

Board feet are nominal thickness in inches × nominal width in inches × length in feet ÷ 12, as the American Softwood Lumber Standard defines board measure. Cut lists pack pieces largest first into boards or sheets, using offcuts before new stock and taking the saw kerf at every cut. Studs are one per spacing plus the end, with extras for corners and openings; actual sizes come from the standard’s Table 3.

How it’s tested

11 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Limits

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: board feet for a lumber list, plywood and board cut lists with kerf, studs for a wall and nominal against actual lumber sizes.

Every change on What’s new

How we make toolsReport a mistake

Key facts

  • A board foot is 1 inch thick by 12 inches wide by 1 foot long: nominal thickness (in) × nominal width (in) × length (ft) ÷ 12, the American Softwood Lumber Standard’s board measure.
  • A 2×4 eight feet long is 2 × 4 × 8 ÷ 12 = 5⅓ board feet, though it measures 1½ × 3½ inches dry.
  • Twelve board feet make a cubic foot of nominal lumber.
  • A small deck frame of nine 2×8s at 12 ft, two at 16 ft and four 4×4 posts at 8 ft is 229.3 board feet.

Source: NIST, Voluntary Product Standard PS 20-25, American Softwood Lumber Standard (2025).

All 4 calculators

Cutting · Framing and sizes

What a board foot is

A board foot is a volume: a board 1 inch thick, 12 inches wide and 1 foot long, or 144 cubic inches. Hardwood and rough lumber are usually priced by the board foot, and softwood dimension lumber is tallied that way at the mill. The American Softwood Lumber Standard defines it on the nominal size: nominal thickness in inches × nominal width in feet × length in feet, which is the same as thickness × width in inches × length in feet ÷ 12. So a 2×4 counts as 2 × 4 even though, dried and planed, it is 1½ × 3½.

Add each line of your lumber list as thickness, width, length and how many, and the calculator totals them. Put in the price per board foot your yard quotes to see the cost. For the actual sizes behind the names, see the lumber sizes page.

Sources

Product names are trademarks of their owners; Binary Decimal is not affiliated with any of them. Their data sheets and guides are cited for the figures printed in them.

Common questions

How do I calculate board feet?

Multiply the thickness in inches by the width in inches by the length in feet, and divide by 12. A 1×6 board 10 ft long is 1 × 6 × 10 ÷ 12 = 5 board feet. Use the nominal sizes the lumber is sold by.

Do I use nominal or actual size?

Nominal. The lumber standard defines board measure on the nominal thickness and width, so a 2×4 is counted as 2 × 4 inches, not its actual 1½ × 3½. Rough-sawn hardwood is sold by its actual thickness in quarters (4/4, 8/4), which is close to nominal.

How many board feet in a 2×4×8?

5⅓: 2 × 4 × 8 ÷ 12 = 5.33. A 2×6×8 is 8 board feet and a 2×10×12 is 20.