Skip to content

Lumber Sizes: Nominal and Actual

A 2×4 is 1½ by 3½ inches.

A 2×4 is 1½ by 3½ inches. Pick any nominal size to see what it really measures, drawn to scale, from the national lumber standard.

Nominal size

A 2×4 measures

1½ × 3½inches

38.1 × 88.9 mm, dry and dressed: 34% less wood than the name.

3½ in2 in1½ inDashed: the 2 × 4 in name · solid: what you get

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms

How this works: 1 source,

How this works

Method

Lumber is named by its nominal size, roughly the size it was sawn to, and then dried and planed smooth, which takes it down to its dressed size. The American Softwood Lumber Standard (PS 20) fixes the minimum dressed sizes: for dry lumber, a nominal 1 in board is ¾ in thick; 2, 3 and 4 in become 1½, 2½ and 3½; widths up to 7 in lose ½ in and 8 in and wider lose ¾ in. So a 2×4 is 1½ × 3½ and a 2×10 is 1½ × 9¼. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Limits

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: board feet for a lumber list, plywood and board cut lists with kerf, studs for a wall and nominal against actual lumber sizes.

Every change on What’s new

How we make toolsReport a mistake

Why a 2×4 is not 2 by 4

Lumber is named by its nominal size, roughly the size it was sawn to, and then dried and planed smooth, which takes it down to its dressed size. The American Softwood Lumber Standard (PS 20) fixes the minimum dressed sizes: for dry lumber, a nominal 1 in board is ¾ in thick; 2, 3 and 4 in become 1½, 2½ and 3½; widths up to 7 in lose ½ in and 8 in and wider lose ¾ in. So a 2×4 is 1½ × 3½ and a 2×10 is 1½ × 9¼.

A 4×4 post, by the same table, is 3½ × 3½ in (89 × 89 mm), so it carries 77% of the wood its name suggests. The board feet you pay for are still worked out on the nominal size, which is why the board foot calculator asks for nominal sizes.

Green lumber, sold wet, is dressed a little bigger (a 2×4 is 1 9⁄16 × 3 9⁄16 in) so that it shrinks to about the dry size. Hardwood and metric timber follow their own sizing, so measure those.

dry dressed size: 1 → ¾; 2 to 7 → − ½; 8 and up → − ¾ (inches)

Nominal and actual lumber sizes

Dry, dressed, from PS 20 Table 3; board feet for an 8 ft length.

Dry, dressed, from PS 20 Table 3; board feet for an 8 ft length.
NominalActualIn millimetresBoard feet (8 ft)
1×4¾ × 3 ½ in19.0 × 88.9 mm2.67
1×6¾ × 5 ½ in19.0 × 139.7 mm4.00
1×8¾ × 7 ¼ in19.0 × 184.1 mm5.33
1×12¾ × 11 ¼ in19.0 × 285.8 mm8.00
2×41 ½ × 3 ½ in38.1 × 88.9 mm5.33
2×61 ½ × 5 ½ in38.1 × 139.7 mm8.00
2×81 ½ × 7 ¼ in38.1 × 184.1 mm10.67
2×101 ½ × 9 ¼ in38.1 × 235.0 mm13.33
2×121 ½ × 11 ¼ in38.1 × 285.8 mm16.00
4×43 ½ × 3 ½ in88.9 × 88.9 mm10.67
Show all 12 rows
4×63 ½ × 5 ½ in88.9 × 139.7 mm16.00
6×65 ½ × 5 ½ in139.7 × 139.7 mm24.00

Sources

Product names are trademarks of their owners; Binary Decimal is not affiliated with any of them. Their data sheets and guides are cited for the figures printed in them.

Common questions

What are the actual dimensions of a 2×4?

1½ × 3½ inches (38 × 89 mm) when dry and dressed, by the American Softwood Lumber Standard. A green 2×4 is 1 9⁄16 × 3 9⁄16 inches.

Why are lumber sizes smaller than their names?

The name is the nominal, rough-sawn size; drying shrinks the wood and planing the faces smooth takes off more. The standard fixes how small the finished piece may be.

What size is a 2×6 and a 2×10?

A 2×6 is 1½ × 5½ in, a 2×10 is 1½ × 9¼ in and a 2×12 is 1½ × 11¼ in, dry.