Molarity Calculator
Mass, volume or molarity from the other two, with a recipe to make it up.
Type a solute and any two of mass, volume and molarity to get the third, with the molar mass worked out from the formula and a recipe for making the solution.
Read as NaCl · 58.44 g/mol
ExampleNaCl to weigh out
7.30g
Weigh 7.30 g of NaCl, dissolve it in less water than you need, then top up to 250 mL in a volumetric flask.
Type your own solute and amounts.
- Moles of solute
- 0.125 mol
- Molar mass
- 58.44 g/mol
- Grams per litre
- 29.2 g/L
How this works: 4 sources,
How this works
Method
Molarity is moles ÷ litres of solution, with moles = grams ÷ the molar mass worked out from the formula on CIAAW 2024 atomic weights, all in exact fractions. Dilution uses C1V1 = C2V2. Mass percent is solute ÷ (solute + solvent) × 100, and ppm takes 1 L of dilute water as 1 kg. pH is solved from the full charge balance with Kw = 1.0 × 10⁻¹⁴ at 25 °C, so very dilute and weak acids come out right. Answers round to the significant figures you type, never fewer than three.
Sources
How it’s tested
11 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: molarity with a recipe, dilution with a drawing of the two vessels, mass percent, ppm against drinking water limits, and pH solved exactly for strong and weak acids and bases.
Key facts
- Molarity is moles of solute per litre of solution: M = n ÷ V, with n = mass ÷ molar mass.
- A volumetric flask is filled to its mark after the solute dissolves, so the volume is the solution’s, not the water’s.
- Molarity changes slightly with temperature because liquids expand; molality, per kilogram of solvent, does not.
All 4 solution calculators
Concentration · Acids and bases
Common questions
What is molarity?
Molarity is moles of solute per litre of solution, written M or mol/L. A 1.00 M sodium chloride solution has 1.00 mol, 58.44 g, of salt in every litre of the finished solution, not in a litre of water added to it.
How do I make a solution of a given molarity?
Multiply the molarity by the volume in litres to get moles, and the moles by the molar mass to get grams. Weigh that mass, dissolve it in less solvent than you need, transfer it to a volumetric flask and add solvent up to the mark. The tool writes this recipe out with your numbers.
Molarity or molality?
Molarity is moles per litre of solution; molality is moles per kilogram of solvent. Molality doesn’t change with temperature, because masses don’t expand, which is why it is used for boiling and freezing point problems. For dilute water solutions the two are nearly equal.
Which number does it solve for?
Whichever you choose. Press “Solve for this” on the mass, the volume or the molarity, and type the other two. The answer is rounded to the significant figures of what you typed.