Mass Percent Calculator (w/w)
Type the mass of what you dissolve and of the solvent to get the mass percent…
Type the mass of what you dissolve and of the solvent to get the mass percent, or a percentage and a total to get how much of each to weigh out.
ExampleMass percent (w/w)
10.0%
15.0 g of solute in 150 g of solution (135 g of solvent) is 10.0% by mass.
Type your own masses.
The solute (dark) as a share of the whole mass, to scale: 10.0%.
- Total mass
- 150.0 g
- Parts per million
- 100,000 ppm
- Solute : solvent
- 1 : 9.00
How this works: 6 sources,
How this works
Method
Mass percent, written % w/w, is the mass of the dissolved substance divided by the mass of the whole solution, times 100. Dissolve 15.0 g of sugar in 135.0 g of water and the solution weighs 150.0 g, so it is 15.0 ÷ 150.0 × 100 = 10.0% sugar by mass. Full method
Sources
- OpenStax Chemistry 2e, 3.4 Other Units for Solution Concentrations
- US National Library of Medicine, DailyMed: Sodium Chloride Injection, USP 0.9%
- OpenStax Chemistry 2e, 3.3 Molarity and 3.4 Other Units for Solution Concentrations
- OpenStax Chemistry 2e, 14.2 pH and pOH
- CIAAW, Standard Atomic Weights 2024 (2024)
- US EPA, National Primary Drinking Water Regulations
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: molarity with a recipe, dilution with a drawing of the two vessels, mass percent, ppm against drinking water limits, and pH solved exactly for strong and weak acids and bases.
How to calculate mass percent
Mass percent, written % w/w, is the mass of the dissolved substance divided by the mass of the whole solution, times 100. Dissolve 15.0 g of sugar in 135.0 g of water and the solution weighs 150.0 g, so it is 15.0 ÷ 150.0 × 100 = 10.0% sugar by mass.
To make a solution of a given strength, run it backwards. Normal saline is 0.9% sodium chloride, so a kilogram of it holds 9.0 g of salt and 991.0 g of water. Weighing both the solute and the solvent makes mass percent independent of temperature, which is why it is used for stock reagents and food labels alike.
Don’t divide by the solvent alone. 15.0 ÷ 135.0 gives 11.1%, which is a ratio, not a percentage of the solution. And don’t mix it up with % w/v (grams per 100 mL of solution), which medicine labels often use: for dilute water solutions the two are close, but for dense ones like concentrated acids they differ a lot.
mass % = mass of solute ÷ (mass of solute + mass of solvent) × 100
- Mass percentage is the ratio of a component’s mass to the solution’s total mass, times 100; ppm and ppb are the same ratio times a million or a billion. Source: OpenStax Chemistry 2e, 3.4 Other Units for Solution Concentrations.
- Normal saline for infusion is sodium chloride 0.9%, labelled as 900 mg per 100 mL. Source: US National Library of Medicine, DailyMed: Sodium Chloride Injection, USP 0.9%.
Mass percent of familiar solutions, worked out
Grams of solute and solvent for each mixture, and the mass percent they make.
| Mixture | Solute (g) | Solvent (g) | Mass percent |
|---|---|---|---|
| A teaspoon of salt (6 g) in a cup of water (240 g) | 6 | 240 | 2.44% |
| Brine for pickling: 50 g salt in 1 kg water | 50 | 1000 | 4.76% |
| Simple syrup, 1 : 1 by weight | 200 | 200 | 50.0% |
| Rich simple syrup, 2 : 1 | 400 | 200 | 66.7% |
| Sports drink: 60 g sugar in 1 kg water | 60 | 1000 | 5.66% |
| Hummingbird feeder: 1 part sugar to 4 parts water | 50 | 200 | 20.0% |
| Sea water: 35 g salts per 965 g water | 35 | 965 | 3.50% |
| 10 g of sugar in 90 g of water | 10 | 90 | 10.0% |
| Saline: 9 g salt in 991 g water | 9 | 991 | 0.900% |
| A 5% vinegar: 50 g acetic acid in 950 g water | 50 | 950 | 5.00% |
Common questions
What is the difference between w/w, w/v and v/v?
w/w is mass of solute per mass of solution; w/v is grams per 100 mL of solution; v/v is millilitres per 100 mL, used for liquids such as alcohol. A 40% v/v spirit is about 33% w/w, because ethanol is lighter than water.
How do I convert mass percent to molarity?
You need the solution’s density and the solute’s molar mass. Grams of solute per litre = mass percent ÷ 100 × density in g/L; divide by the molar mass for moles per litre.
Can mass percent be more than 100?
No. The solute is part of the solution, so it can at most be all of it. If you get more than 100, the solvent mass was probably entered as the total.