Skip to content

pH Calculator: Acids, Bases, pOH and [H+]

Pick an acid or base and its concentration for the pH…

Pick an acid or base and its concentration for the pH, solved exactly with water’s own ions included, or convert between pH, pOH, [H+] and [OH-].

Acid or base

Blank uses acetic acid’s pKa of 4.756. A number of 1 or more is read as pKa.

ExamplepH of 0.10 M acetic acid

2.88

Solved exactly from the charge balance; 1.32% of the acid is ionised. The square-root shortcut agrees here.

Pick your own acid or base and concentration.

024678101214rain 5.6tap water 6.5–8.5
acidicneutral 7 at 25 °Cbasic
pOH
11.12
[H⁺]
1.32 × 10⁻³ M
[OH⁻]
7.60 × 10⁻¹² M
How this works: 7 sources,

How this works

Method

pH is the negative base-10 logarithm of the hydrogen ion concentration: pH = −log[H⁺]. A strong acid such as hydrochloric acid gives up all its H⁺, so 0.010 M HCl has [H⁺] = 0.010 M and pH 2.00. For a strong base, find pOH = −log[OH⁻] and subtract from 14.00, because [H⁺][OH⁻] = 1.0 × 10⁻¹⁴ in water at 25 °C. Full method

How it’s tested

3 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: molarity with a recipe, dilution with a drawing of the two vessels, mass percent, ppm against drinking water limits, and pH solved exactly for strong and weak acids and bases.

Every change on What’s new

How we make toolsReport a mistake

How pH is calculated

pH is the negative base-10 logarithm of the hydrogen ion concentration: pH = −log[H⁺]. A strong acid such as hydrochloric acid gives up all its H⁺, so 0.010 M HCl has [H⁺] = 0.010 M and pH 2.00. For a strong base, find pOH = −log[OH⁻] and subtract from 14.00, because [H⁺][OH⁻] = 1.0 × 10⁻¹⁴ in water at 25 °C.

A weak acid only partly ionises, so its [H⁺] comes from its acid constant Ka. For acetic acid (Ka = 1.75 × 10⁻⁵) at 0.10 M, solving x² ÷ (0.10 − x) = Ka gives x = 1.32 × 10⁻³ M and pH 2.88; only 1.3% of the molecules have given up a proton. The tool solves the full equation, water’s own ions included, rather than the √(Ka·C) shortcut, and shows how far the shortcut is off.

Water matters when the acid is very dilute. The shortcut says 10⁻⁸ M hydrochloric acid has pH 8, which would make an acid basic. Counting the 10⁻⁷ M of H⁺ that pure water provides gives the right answer, 6.98, just below neutral. Sulfuric acid is a second exception: its first proton is strong but its second is not, so 0.010 M H₂SO₄ is pH 1.85, not 1.70.

pH = −log₁₀[H⁺]; pH + pOH = 14.00 (25 °C); weak acid: x³ + Ka·x² − (Ka·C + Kw)·x − Ka·Kw = 0

pH of common acids and bases, exact and by shortcut

The pH from the full charge balance at 25 °C against the usual shortcut (−log C for strong acids and bases, √(K·C) for weak ones).

The pH from the full charge balance at 25 °C against the usual shortcut (−log C for strong acids and bases, √(K·C) for weak ones).
Solutionmol/LpH (exact)pH (shortcut)
Hydrochloric acid0.11.001.00
Hydrochloric acid0.0013.003.00
Hydrochloric acid1 × 10⁻76.797.00
Sulfuric acid0.011.851.70
Sodium hydroxide0.0112.0012.00
Calcium hydroxide0.0112.3012.30
Acetic acid0.12.882.88
Acetic acid0.0013.913.88
Formic acid0.12.382.37
Hydrofluoric acid0.12.102.08
Show all 11 rows
Ammonia0.111.1211.13

Common questions

Can pH be negative?

Yes. A strong acid stronger than 1 M has [H⁺] above 1, so its pH is below 0: 2 M HCl is about pH −0.3 on paper. At such strengths activity differs from concentration, so real readings drift from the simple formula.

Why does pH + pOH equal 14?

Because water’s ion product, [H⁺][OH⁻], is 1.0 × 10⁻¹⁴ at 25 °C, and taking −log of both sides gives pH + pOH = 14. At other temperatures Kw changes, and so does the sum, so neutral is not exactly 7 away from 25 °C.

When can I use the √(Ka·C) shortcut?

When less than about 5% of the acid ionises, which is when C is well above Ka. For dilute or fairly strong weak acids it overestimates [H⁺]; the tool shows the shortcut beside the exact answer so you can see the gap.

How do I find [H⁺] from pH?

Take 10 to the power of minus the pH: pH 3.5 is [H⁺] = 10⁻³·⁵ = 3.16 × 10⁻⁴ M. Pick Convert in the tool to go between pH, pOH, [H⁺] and [OH⁻].