Displacement Calculator
How far something ends up from where it started while it speeds up or slows down…
How far something ends up from where it started while it speeds up or slows down, such as a car braking to a stop. Pick what you know and the distance follows.
s = (v² − u²) ÷ 2a
Signs give direction: the way it starts moving is positive, so slowing down is a negative acceleration.
ExampleDisplacement
64.29m
Starting at 30 m/s, slowing at 7 m/s², it covers 64.29 m in 4.286 s and comes to a stop.
Enter your own values to see your result.
At 4.29 s: 64.29 m from the start, moving at 0 m/s
- Time
- 4.286 s
- In US units
- 210.9 ft
- Average velocity
- 15 m/s (33.55 mph)
How this works: 9 sources,
How this works
Method
Displacement is how far an object ends up from where it started, with a sign for direction. With steady acceleration the quickest route, if you know the time, is s = ut + ½at²: a dragster from rest at 26.0 m/s² for 5.56 s covers ½ × 26.0 × 5.56² = 402 m, a quarter mile (OpenStax Example 3.8). Full method
Sources
- OpenStax University Physics Volume 1, §3.4 Motion with Constant Acceleration
- OpenStax University Physics Volume 1, §3.1 Position, Displacement, and Average Velocity
- OpenStax University Physics Volume 1, §3.3 Average and Instantaneous Acceleration (2016)
- OpenStax University Physics Volume 1, §3.5 Free Fall (2016)
- OpenStax University Physics Volume 1, §6.4 Drag Force and Terminal Speed (2016)
- CODATA 2022: standard acceleration of gravity (NIST, CODATA 2022)
- The Drag Equation (NASA Glenn Research Center)
- Terminal Velocity (NASA Glenn Research Center)
- Guide for the Use of the SI, Appendix B.8 (conversion factors) (NIST, SP 811)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: the SUVAT solver with a moving motion diagram and graphs, plus velocity, acceleration, displacement, free fall, terminal velocity and average speed pages.
How to work out displacement
Displacement is how far an object ends up from where it started, with a sign for direction. With steady acceleration the quickest route, if you know the time, is s = ut + ½at²: a dragster from rest at 26.0 m/s² for 5.56 s covers ½ × 26.0 × 5.56² = 402 m, a quarter mile (OpenStax Example 3.8).
Stopping distances use s = (v² − u²) ÷ 2a with v = 0. From 30.0 m/s (108 km/h), braking at 7.00 m/s² on dry concrete takes 64.3 m, and at 5.00 m/s² on wet concrete 90 m: 40% more, from a road that grips a little less (OpenStax Example 3.10). The distance grows with the square of the speed, so driving 10% faster needs 21% more road to stop.
If you know both speeds and the time, s = ½(u + v)t: the average of the two speeds times the time. It works because, with steady acceleration, the speed rises in a straight line, and the area under a straight line is its average height times its width, the shaded area on the velocity-time graph.
s = ut + ½at² · s = (v² − u²) ÷ 2a · s = ½(u + v)t
- On a velocity-time graph the area under the line is the displacement; for constant acceleration that area is a trapezoid, ½(u + v)t. Source: OpenStax University Physics Volume 1, §3.4 Motion with Constant Acceleration.
- Displacement is the change in position, so an object that comes back to its start has zero displacement however far it went. Source: OpenStax University Physics Volume 1, §3.1 Position, Displacement, and Average Velocity.
Braking distance from common speeds
Distance to stop while braking at 7.00 m/s² (dry) and 5.00 m/s² (wet), the decelerations in OpenStax Example 3.10, plus the distance covered in 1.0 s before the brakes come on.
| Speed | Braking, dry | Braking, wet | Dry, with 1.0 s to react |
|---|---|---|---|
| 30 km/h (19 mph) | 4.96 m | 6.94 m | 13.3 m |
| 40 km/h (25 mph) | 8.82 m | 12.3 m | 19.9 m |
| 50 km/h (31 mph) | 13.8 m | 19.3 m | 27.7 m |
| 60 km/h (37 mph) | 19.8 m | 27.8 m | 36.5 m |
| 70 km/h (43 mph) | 27 m | 37.8 m | 46.5 m |
| 80 km/h (50 mph) | 35.3 m | 49.4 m | 57.5 m |
| 90 km/h (56 mph) | 44.6 m | 62.5 m | 69.6 m |
| 100 km/h (62 mph) | 55.1 m | 77.2 m | 82.9 m |
| 110 km/h (68 mph) | 66.7 m | 93.4 m | 97.2 m |
| 120 km/h (75 mph) | 79.4 m | 111 m | 113 m |
Show all 11 rowsShow fewer
| 130 km/h (81 mph) | 93.1 m | 130 m | 129 m |
Common questions
What is the difference between displacement and distance?
Distance is the length of the path; displacement is the straight-line change in position, with a direction. Walk 3 km east and 1 km back west and you have travelled 4 km but your displacement is 2 km east. The calculator shows both when the motion turns round.
How do I calculate stopping distance?
Choose “From u, v, a”, enter the speed as u, 0 as v and the braking deceleration as a negative a. Add the distance covered while reacting (speed times reaction time) for the full stopping distance; the table includes 1.0 s of it.
Why does doubling the speed quadruple the braking distance?
Because s = u² ÷ 2a when stopping: the distance goes with the square of the speed. The kinetic energy the brakes must turn into heat grows the same way, ½mv².