Tire Size Comparison
Put two tire sizes side by side, drawn to scale on the same ground…
Put two tire sizes side by side, drawn to scale on the same ground: how much taller and wider the new one is, what it does to clearance, and what your speedometer will read.
As printed on the sidewall, such as 225/45R17 or 33x12.50R15.
The size you are thinking of fitting.
285/70R17 vs 265/70R17
+3.49%diameter
Taller by 28 mm (1.1 in), and 20 mm wider.
| mm | 265/70R17 | 285/70R17 | Change |
|---|---|---|---|
| Overall diameter | 802.8 | 830.8 | +3.5% |
| Section width | 265 | 285 | +7.5% |
| Sidewall height | 185.5 | 199.5 | +7.5% |
| Rim diameter | 431.8 | 431.8 | 0% |
| Circumference | 2,522.1 | 2,610 | +3.5% |
| Revolutions per mile | 638.1 | 616.6 | −3.4% |
| Revolutions per km | 396.5 | 383.1 | −3.4% |
When the speedometer shows 100 km/h, you are doing 103.5 km/h, assuming it read true on the 265/70R17.
- Ground clearance
- +14 mm
- Revolutions per mile
- 638 → 617
Design dimensions from the size printed on the tire; real tires vary a little by brand, rim width, pressure and wear. Check fitment, load index and speed rating with your tire shop. Terms
How this works: 5 sources,
How this works
Method
Each size becomes millimetres first: the sidewall is width × aspect ratio ÷ 100, the overall diameter is the rim in inches × 25.4 plus two sidewalls, and the circumference is π × diameter. A flotation size such as 35x12.50R17 gives its diameter and width in inches, so they are multiplied by 25.4. Full method
Sources
- ISO 4000-1, Passenger car tyres and rims: Part 1, Tyres (metric series) (International Organization for Standardization, 2024)
- International yard and pound agreement (1 inch = 25.4 mm, 1 mile = 1,609.344 m) (US National Bureau of Standards, 1959)
- ETRTO Standards Manual (tyre designation and dimensions) (European Tyre and Rim Technical Organisation)
- UN Regulation No. 39: speedometer and odometer equipment (UNECE)
- Wheel offset vs. backspacing explained (Speedway Motors)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Limits
Design dimensions from the size printed on the tire; real tires vary a little by brand, rim width, pressure and wear. Check fitment, load index and speed rating with your tire shop.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: tire dimensions from the size, two sizes drawn to scale, speedometer error dials, wheel offset and backspacing, plus sizing and effective gear ratio.
Worked example: 215/60R16 against 225/55R17
215/60R16: sidewall 215 × 0.60 = 129 mm; diameter 16 × 25.4 + 2 × 129 = 406.4 + 258 = 664.4 mm. 225/55R17: sidewall 225 × 0.55 = 123.75 mm; diameter 431.8 + 247.5 = 679.3 mm.
The 17-inch size is 14.9 mm taller (+2.24%), 10 mm wider, and sits 7.4 mm higher at the axle. At a true 100 km/h the speedometer would show 97.8.
How two sizes are compared
Each size becomes millimetres first: the sidewall is width × aspect ratio ÷ 100, the overall diameter is the rim in inches × 25.4 plus two sidewalls, and the circumference is π × diameter. A flotation size such as 35x12.50R17 gives its diameter and width in inches, so they are multiplied by 25.4.
The difference that matters is the overall diameter. Half of it is the change in ground clearance at the axle, and the ratio between the two diameters is the change in speedometer reading, odometer reading and gearing, all at once.
The drawing puts both tires on the same ground line at the same scale, from the side and from the front, so a taller or wider tire shows as it would under the car.
diameter = rim × 25.4 + 2 × width × aspect ÷ 100 · change = new ÷ old − 1
- Metric tire sizes give the section width in mm, the aspect ratio in percent and the rim diameter in inches. Source: ISO 4000-1, Passenger car tyres and rims: Part 1, Tyres (metric series), International Organization for Standardization, 2024.
- One inch is exactly 25.4 mm by international agreement. Source: International yard and pound agreement (1 inch = 25.4 mm, 1 mile = 1,609.344 m), US National Bureau of Standards, 1959.
Common tire sizes and their dimensions
Overall diameter, section width and revolutions per mile, from the size alone.
| Size | Diameter | Width | Revs/mile |
|---|---|---|---|
| 205/55R16 | 24.9″ (632 mm) | 205 mm | 811 |
| 215/55R17 | 26.3″ (668 mm) | 215 mm | 767 |
| 225/45R17 | 25.0″ (634 mm) | 225 mm | 808 |
| 225/65R17 | 28.5″ (724 mm) | 225 mm | 707 |
| 235/45R18 | 26.3″ (669 mm) | 235 mm | 766 |
| 245/40R19 | 26.7″ (679 mm) | 245 mm | 755 |
| 245/75R16 | 30.5″ (774 mm) | 245 mm | 662 |
| 255/55R18 | 29.0″ (738 mm) | 255 mm | 694 |
| 265/70R17 | 31.6″ (803 mm) | 265 mm | 638 |
| 275/55R20 | 31.9″ (811 mm) | 275 mm | 632 |
Show all 15 rowsShow fewer
| 285/75R16 | 32.8″ (834 mm) | 285 mm | 614 |
| LT285/70R17 | 32.7″ (831 mm) | 285 mm | 617 |
| 33x12.50R15 | 33.0″ (838 mm) | 318 mm | 611 |
| 35x12.50R17 | 35.0″ (889 mm) | 318 mm | 576 |
| 37x12.50R17 | 37.0″ (940 mm) | 318 mm | 545 |
Sources
- ISO 4000-1, Passenger car tyres and rims: Part 1, Tyres (metric series), International Organization for Standardization, 2024
- ETRTO Standards Manual (tyre designation and dimensions), European Tyre and Rim Technical Organisation
- International yard and pound agreement (1 inch = 25.4 mm, 1 mile = 1,609.344 m), US National Bureau of Standards, 1959
Common questions
How much bigger can I go?
There is no single safe number: it depends on clearance in your wheel wells, at full steering lock and with the suspension compressed. Bigger changes also move the speedometer and gearing further. Many owners stay within a few percent of stock diameter for those reasons.
Is a 285 tire much wider than a 265?
By 20 mm, about 0.8 inches, split between the inside and the outside of the wheel. On the same rim the sidewall also grows, because the aspect ratio is a share of the width.
Do bigger tires change ground clearance?
Yes, by half the change in diameter at the axle. Under the differential and suspension arms, the lowest points, that is all you gain; a lift kit changes the body height, not the axle.