Skip to content

Post Hole Concrete Calculator

Bags of concrete for a row of fence or deck posts…

Bags of concrete for a row of fence or deck posts, with the hole sized by the bag maker’s rule, the post’s own space taken out and gravel under it.

in
in
in
in

QUIKRETE’s rule: a hole 3 times the post’s width (10.5 in), a third of the post’s length in the ground, plus 6 in of gravel. The example is an 8 ft post: 32 in in the ground. Go below the frost line for anything structural.

⌀ 10.5 in38 in deepgravel 6 inconcrete× 10 posts
More options10% extra · 80 lb bags · 10 yd³ truck

Extra to allow

The ready-mix industry (NRMCA) says to order 4% to 10% more than the plan dimensions give, for spillage, a low spot in the ground and forms that bow.

cu ft a bag
cu yd

NRMCA: truck mixers carry 8 to 12 cubic yards (about 6 to 9 m³).

Compare prices (optional)

$
$
$

Prices from your store and your local ready-mix plant. Small orders often carry a short-load fee: ask, and put it under delivery.

ExampleBags to buy

26bags of 80 lb

0.57 cu yd with 10% extra, 1.04 tons of bags.

Enter yours to see your result.

Bags, by size

26 bags in stacks of 10 · 1.04 tons to lift

A job this size is mixed from bags: 0.57 cu yd is 6% of a ready-mix truck.

Volume
15.1 cu ft with 10% extra
Concrete in each hole
1.4 cu ft

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms

My shopping list

Add each part of a job and print one list: a paver patio is base stone, bedding sand and the pavers; a fence is post holes. It stays on this device.

How this works: 11 sources,

How this works

Method

Each hole is a cylinder. QUIKRETE’s instructions size it at three times the post’s width across, and deep enough to bury a third of the post’s overall length, plus 6 inches of gravel at the bottom for drainage. The concrete fills the hole above the gravel, less the space the post itself takes up, and the calculator multiplies that by the number of posts. Full method

Sources

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Limits

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: draw any area and see bags on a pallet, yards or trucks, with 14 job and material pages and a shopping list kept on your device.

Every change on What’s new

How we make toolsReport a mistake

How the post holes are worked out

Each hole is a cylinder. QUIKRETE’s instructions size it at three times the post’s width across, and deep enough to bury a third of the post’s overall length, plus 6 inches of gravel at the bottom for drainage. The concrete fills the hole above the gravel, less the space the post itself takes up, and the calculator multiplies that by the number of posts.

A second example: 24 posts for a long fence, each 4×4 (3½ in actual) in a 12 inch hole 42 inches deep over 6 inches of gravel. Each hole holds 2.36 cubic feet above the gravel, the post takes 0.26, leaving 2.10. For all 24 that is 50.4 cubic feet: 148 bags of 50 lb with 10% extra.

The gravel is a separate buy: a 10½ inch hole takes about a third of a cubic foot of it for 6 inches. For posts that hold up a structure, such as a deck, QUIKRETE says the hole must go at least 6 inches below the frost line, and local code may ask for a footing instead.

per hole = π ÷ 4 × D² × (depth − gravel) − post area × (depth − gravel)

Concrete per post, by the three-times rule

Hole 3 × the post width across, a third of the post’s length plus 6 in of gravel deep. Bags include 10% extra.

Hole 3 × the post width across, a third of the post’s length plus 6 in of gravel deep. Bags include 10% extra.
PostHoleConcrete a hole50 lb bags a post80 lb bags a post
4×4 post, 8 ft long10.5 × 38 in1.38 cu ft53
4×4 post, 10 ft long10.5 × 46 in1.72 cu ft64
6×6 post, 10 ft long16.5 × 46 in4.25 cu ft138
6×6 post, 12 ft long16.5 × 54 in5.10 cu ft1510
2⅜ in round post, 8 ft long7.1 × 38 in0.66 cu ft22
3½ in round post, 10 ft long10.5 × 46 in1.78 cu ft64

Sources

QUIKRETE and Sakrete are trademarks of their owners; Binary Decimal is not affiliated with them. Their data sheets are cited for the yields printed on their bags.

Common questions

How many bags of concrete per fence post?

For a 4×4 post 8 ft long, QUIKRETE’s rule gives a hole 10½ inches across and 38 inches deep, with 6 inches of gravel at the bottom. The concrete part is about 1.38 cubic feet: 5 bags of 50 lb or 3 of 80 lb with 10% extra.

Should I put gravel in the bottom of a post hole?

QUIKRETE’s post instructions say to put 6 inches of gravel or crushed stone in the hole first, so water drains away from the end of the post. The calculator leaves that layer out of the concrete and tells you how much gravel it is.

Can I pour dry concrete mix into the hole?

Some fast-setting mixes are made to be poured dry and soaked with water in the hole; follow the instructions on your bag. QUIKRETE’s Concrete Mix sheet says to mix it with water before it goes into the hole. Either way the volume of concrete is the same.