Skip to content

Paver Base Calculator

Tons of compacted base and the bedding sand over it for a paver patio…

Tons of compacted base and the bedding sand over it for a paver patio, walkway or driveway, at the depths the paver makers publish.

Area192 sq ft
16′12′
ft
ft
How many1
in
Pavers · 2.38 inBase · 6 in024681012in
More options0% extra · 2,500 lb/yd³ loose · compacted +27%

Extra to allow

For spillage and uneven ground. A compacted layer’s own shrinkage is counted separately, from the loose and compacted weights.

lb/yd³

MoDOT’s tables put loose paver base (crushed stone) at 2,410 to 2,590 lb/yd³. Your supplier’s figure is better: put it here.

cu yd

TxDOT: tandem dump trucks usually carry 12 or 14 cubic yards; single-axle trucks about 6.

ExamplePaver base to order

5.66tons

4.53 cu yd loose, to compact to 3.56 cu yd.

Enter yours to see your result.

0.38 of a 12 cubic yard truckload

Bag size

In bags
227 × 50 lb
Extra for compaction
27%
Area
192 sq ft

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms

My shopping list

Add each part of a job and print one list: a paver patio is base stone, bedding sand and the pavers; a fence is post holes. It stays on this device.

How this works: 11 sources,

How this works

Method

A paver patio is built in layers: a compacted aggregate base, about an inch of bedding sand, then the pavers. The base is the big one. Paver makers publish its depth by use: Belgard gives a minimum of 4 inches for sidewalks and patios and 6 for residential driveways, and Unilock 6 to 8 inches for patios on well-drained ground and 8 to 12 on clay. The calculator orders the loose crushed stone that compacts to the depth you set, and shows the sand layer in the cutaway. Full method

How it’s tested

One worked example for this page is checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Limits

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: draw any area and see bags on a pallet, yards or trucks, with 14 job and material pages and a shopping list kept on your device.

Every change on What’s new

How we make toolsReport a mistake

How the paver base is worked out

A paver patio is built in layers: a compacted aggregate base, about an inch of bedding sand, then the pavers. The base is the big one. Paver makers publish its depth by use: Belgard gives a minimum of 4 inches for sidewalks and patios and 6 for residential driveways, and Unilock 6 to 8 inches for patios on well-drained ground and 8 to 12 on clay. The calculator orders the loose crushed stone that compacts to the depth you set, and shows the sand layer in the cutaway.

For a 3 × 25 ft garden walkway on 4 inches of compacted base: 75 sq ft × 4 ÷ 324 = 0.93 cubic yards as laid, 1.18 cubic yards loose to order, about 1.47 tons. Its bedding sand is 75 ÷ 12 = 6.3 cubic feet.

Build the base in layers of a few inches, compacting each, as Belgard advises for most residential jobs. Work out the bedding sand on the sand page at 1 inch, and add both to your shopping list with the pavers.

loose yards = area × depth ÷ 324 × (compacted ÷ loose weight)

Base and bedding sand for paver jobs

Compacted base at 6 in (8 in for the driveway), MoDOT weights; sand at 1 in.

Compacted base at 6 in (8 in for the driveway), MoDOT weights; sand at 1 in.
JobBase depthBase: tonsBase: yards to orderBedding sand
Walkway 3 × 20 ft6 in1.77 tons1.41 yd³5.0 cu ft
Patio 10 × 10 ft6 in2.94 tons2.36 yd³8.3 cu ft
Patio 12 × 16 ft6 in5.65 tons4.52 yd³16.0 cu ft
Patio 16 × 20 ft6 in9.42 tons7.54 yd³26.7 cu ft
Patio 20 × 24 ft6 in14.13 tons11.31 yd³40.0 cu ft
Driveway 12 × 40 ft8 in18.84 tons15.08 yd³40.0 cu ft

Common questions

How much paver base do I need?

Area × compacted depth, plus the extra loose stone that compacts away. A 12 × 16 ft patio on 6 inches of compacted base is 3.56 cubic yards as laid, about 4.5 yards loose, 5.7 tons.

How deep should paver base be?

For patios and walkways, Belgard’s minimum is 4 inches and Unilock recommends 6 to 8 on well-drained soil, more on clay. Driveways need more: 6 inches minimum from Belgard, 8 to 16 from Unilock depending on the soil.

Is paver base the same as crushed stone?

Paver base is a graded crushed stone, with sizes from about ¾ inch down to fines so it compacts hard. Bagged paver base is the same idea in 50 lb bags; for more than a small walkway, price bulk crushed aggregate base from a quarry as well.