Cubic Yard Calculator
Cubic yards for any material from the shape of the area and its depth…
Cubic yards for any material from the shape of the area and its depth, with cubic feet and cubic metres beside them.
More options0% extra
Extra to allow
For spillage and uneven ground. A compacted layer’s own shrinkage is counted separately, from the loose and compacted weights.
TxDOT: tandem dump trucks usually carry 12 or 14 cubic yards; single-axle trucks about 6.
ExampleVolume
2.08cubic yards
56 cu ft in all.
Enter yours to see your result.
- Cubic metres
- 1.59 m³
- As 80 lb bags of concrete
- 94
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms
My shopping list
Add each part of a job and print one list: a paver patio is base stone, bedding sand and the pavers; a fence is post holes. It stays on this device.
How this works: 9 sources,
How this works
Method
A cubic yard is a cube 3 ft on each side: 27 cubic feet. To get cubic yards, multiply the area in square feet by the depth in feet and divide by 27. Depth is usually measured in inches, so divide it by 12 first. The calculator does this for any mix of shapes, so an L-shaped bed or a round patio works as well as a rectangle. Full method
Sources
- NIST Handbook 44 (2026), Appendix C: General tables of units of measurement (National Institute of Standards and Technology, 2026)
- Seal Coat and Surface Treatment Manual: haul trucks, size (Texas Department of Transportation)
- QUIKRETE Concrete Mix (No. 1101) data sheet (QUIKRETE, revised October 2022)
- Sakrete High Strength Concrete Mix data sheet (Sakrete (Oldcastle APG), REV 7-10)
- Sakrete Concrete Mix product data sheet (30 kg) (Sika Canada)
- CIP 31, Ordering Ready Mixed Concrete (National Ready Mixed Concrete Association, 2023)
- CIP 8, Discrepancies in Yield (National Ready Mixed Concrete Association)
- International Residential Code 2021: R311.3, R311.7.5, R403.1.1, R506.1 (International Code Council, 2021)
- Highway Maintenance Tables and Conversion Factors: loose and compacted weights of materials (Missouri Department of Transportation, Engineering Policy Guide)
How it’s tested
One worked example for this page is checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Limits
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: draw any area and see bags on a pallet, yards or trucks, with 14 job and material pages and a shopping list kept on your device.
How cubic yards are worked out
A cubic yard is a cube 3 ft on each side: 27 cubic feet. To get cubic yards, multiply the area in square feet by the depth in feet and divide by 27. Depth is usually measured in inches, so divide it by 12 first. The calculator does this for any mix of shapes, so an L-shaped bed or a round patio works as well as a rectangle.
For example, a 30 × 40 ft area filled 6 inches deep is 1,200 × 0.5 = 600 cubic feet, ÷ 27 = 22.23 cubic yards, or 17.00 cubic metres. Cubic yards are how ready-mix concrete, topsoil, mulch and most bulk materials are sold in the US; stone and sand are often sold by the ton instead, which the gravel and sand pages work out.
One cubic yard covers 324 square feet at 1 inch deep, 108 at 3 inches and 81 at 4 inches: divide 324 by the depth in inches. That is the quickest way to check any supplier’s quote in your head.
cubic yards = square feet × depth (in) ÷ 12 ÷ 27 = square feet × depth (in) ÷ 324
- 27 cubic feet make 1 cubic yard; 1 cubic yard is exactly 0.764554857984 cubic metres. Source: NIST Handbook 44 (2026), Appendix C: General tables of units of measurement.
- Tandem dump trucks usually carry 12 or 14 cubic yards; single-axle trucks about 6. Source: Seal Coat and Surface Treatment Manual: haul trucks, size.
What one cubic yard covers
324 ÷ depth in inches gives the square feet one cubic yard covers.
| Depth | Area covered | In m² | Area per cubic foot |
|---|---|---|---|
| 1 in | 324 sq ft | 30.1 m² | 12.00 sq ft per cu ft |
| 2 in | 162 sq ft | 15.1 m² | 6.00 sq ft per cu ft |
| 3 in | 108 sq ft | 10.0 m² | 4.00 sq ft per cu ft |
| 4 in | 81 sq ft | 7.5 m² | 3.00 sq ft per cu ft |
| 6 in | 54 sq ft | 5.0 m² | 2.00 sq ft per cu ft |
| 8 in | 41 sq ft | 3.8 m² | 1.50 sq ft per cu ft |
| 12 in | 27 sq ft | 2.5 m² | 1.00 sq ft per cu ft |
Common questions
How do I convert square feet to cubic yards?
You need a depth. Multiply the square feet by the depth in inches and divide by 324. For 500 sq ft at 3 inches: 500 × 3 ÷ 324 = 4.63 cubic yards.
How many cubic feet are in a cubic yard?
Exactly 27, because a yard is 3 feet and 3 × 3 × 3 = 27. A cubic yard is also 46,656 cubic inches and 0.7646 cubic metres.
How much does a cubic yard weigh?
It depends on the material. MoDOT’s tables put loose crushed limestone or granite at about 2,400 to 2,600 lb a cubic yard and loose sand at 2,600 to 3,000 lb; mulch is far lighter, and wet soil heavier than dry. The material pages show the weight with an editable default.