Topsoil Calculator
Cubic yards or bags of topsoil for a new lawn, a raised bed or levelling a low spot…
Cubic yards or bags of topsoil for a new lawn, a raised bed or levelling a low spot, from the area and the depth.
More options0% extra · no weight
Extra to allow
For spillage and uneven ground. A compacted layer’s own shrinkage is counted separately, from the loose and compacted weights.
Topsoil weighs very different amounts wet and dry, so no default is given. Add your supplier’s figure to see the weight.
TxDOT: tandem dump trucks usually carry 12 or 14 cubic yards; single-axle trucks about 6.
ExampleTopsoil to order
7.41cubic yards
267 bags of 0.75 cu ft, or 0.62 of a 12 cubic yard truckload.
Enter yours to see your result.
Bag size
- Cubic feet
- 200 cu ft
- Area
- 600 sq ft
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms
My shopping list
Add each part of a job and print one list: a paver patio is base stone, bedding sand and the pavers; a fence is post holes. It stays on this device.
How this works: 10 sources,
How this works
Method
Topsoil is bought by the cubic yard in bulk or in small bags, often 0.75 or 1 cubic foot. The volume is the area times the depth: for a lawn the area of the lawn, for a raised bed its inside length and width times the depth of soil. Draw several beds as one shape with a count. Full method
Sources
- Lawn Establishment (Penn State Extension)
- NIST Handbook 44 (2026), Appendix C: General tables of units of measurement (National Institute of Standards and Technology, 2026)
- QUIKRETE Concrete Mix (No. 1101) data sheet (QUIKRETE, revised October 2022)
- Sakrete High Strength Concrete Mix data sheet (Sakrete (Oldcastle APG), REV 7-10)
- Sakrete Concrete Mix product data sheet (30 kg) (Sika Canada)
- CIP 31, Ordering Ready Mixed Concrete (National Ready Mixed Concrete Association, 2023)
- CIP 8, Discrepancies in Yield (National Ready Mixed Concrete Association)
- International Residential Code 2021: R311.3, R311.7.5, R403.1.1, R506.1 (International Code Council, 2021)
- Highway Maintenance Tables and Conversion Factors: loose and compacted weights of materials (Missouri Department of Transportation, Engineering Policy Guide)
- Seal Coat and Surface Treatment Manual: haul trucks, size (Texas Department of Transportation)
Limits
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: draw any area and see bags on a pallet, yards or trucks, with 14 job and material pages and a shopping list kept on your device.
How topsoil is worked out
Topsoil is bought by the cubic yard in bulk or in small bags, often 0.75 or 1 cubic foot. The volume is the area times the depth: for a lawn the area of the lawn, for a raised bed its inside length and width times the depth of soil. Draw several beds as one shape with a count.
Three raised beds 4 × 8 ft inside, filled 11 inches deep: 96 sq ft × 11 ÷ 12 = 88 cubic feet, or 3.26 cubic yards. In 0.75 cubic foot bags that is 118 bags, a lot of bags to carry, so a bulk load is worth pricing.
Penn State Extension says a new lawn needs at least 4 to 6 inches of good topsoil, measured settled. Loose soil settles after watering and rain, so order a little more than the settled depth; the extra chips do that. Soil weighs very different amounts wet and dry, so weight only shows when you enter your supplier’s figure.
cubic yards = area (sq ft) × depth (in) ÷ 324
- A new lawn needs a minimum of 4 to 6 inches (firmed or settled depth) of good-quality topsoil. Source: Lawn Establishment.
- A cubic yard is 27 cubic feet, about 36 bags of 0.75 cubic feet. Source: NIST Handbook 44 (2026), Appendix C: General tables of units of measurement.
Topsoil for lawns and raised beds
Volume as filled; bags of 0.75 cu ft.
| Job | Depth | Cubic yards | Cubic feet | 0.75 cu ft bags |
|---|---|---|---|---|
| Lawn patch 10 × 10 ft | 4 in | 1.23 yd³ | 33.3 cu ft | 45 |
| New lawn 20 × 30 ft | 4 in | 7.41 yd³ | 200.0 cu ft | 267 |
| New lawn 40 × 50 ft | 6 in | 37.04 yd³ | 1,000.0 cu ft | 1,334 |
| Raised bed 4 × 8 ft | 10 in | 0.99 yd³ | 26.7 cu ft | 36 |
| Raised bed 4 × 12 ft | 12 in | 1.78 yd³ | 48.0 cu ft | 64 |
| Three raised beds 4 × 8 ft | 12 in | 3.56 yd³ | 96.0 cu ft | 128 |
Common questions
How much topsoil do I need for a raised bed?
Inside length × inside width × depth. A 4 × 8 ft bed filled 10 inches deep holds 26.7 cubic feet, about one cubic yard. Many gardeners mix topsoil with compost; the total volume is the same, split between them.
How deep should topsoil be for a new lawn?
At least 4 to 6 inches of good topsoil once settled, according to Penn State Extension. Seed or sod on less than that tends to dry out faster and root shallowly.
How much does a yard of topsoil weigh?
Anywhere from about a ton to well over, depending on how wet it is and how much clay or sand it holds, so there is no honest single figure. Ask your supplier; if you enter their weight per yard under More options, the calculator shows the total.