Skip to content

Paint Calculator

The walls of your room laid out flat, doors and windows taken out…

The walls of your room laid out flat, doors and windows taken out, and the paint for the coats you need, in cans you can buy.

Rooms120 sq ft
12′10′
ft
ft
How many1
ft

Coats

Doors

1
ft
ft

Windows

2
ft
ft
More options350 sq ft a gallon a coat
sq ft/gal

From the tin or the paint’s data sheet. Sherwin-Williams gives 350 to 400 sq ft a gallon for Emerald interior paint and Behr 250 to 400 for Premium Plus; Dulux Trade Vinyl Matt says up to 17 m² a litre. Rough or new walls take more.

ExamplePaint to buy

1.76gallons

Buy 2 gallons: 2 coats over 308 sq ft.

Enter yours to see your result.

12′10′12′10′
Walls, less openings
308 sq ft
Spread rate
350 sq ft/gal

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms

My home

Save the rooms you measure once, then open any of them on the paint, flooring, tile or baseboard pages. They stay on this device.

My shopping list

Add each part of a job and print one list: a room is paint, flooring and baseboard; a patio is base, sand and pavers. It stays on this device.

How this works: 18 sources,

How this works

Method

Paint goes on walls, so the calculator starts from the room’s floor plan and its wall height: each wall’s length times the height, added up, less the doors and windows. That is the area you paint. Multiply by the number of coats and divide by the spread rate, the area a gallon or litre covers in one coat, and you have the paint. The calculator then rounds to cans you can buy: whole gallons plus quarts (three quarts or more become another gallon), or the mix of 1, 2.5, 5 and 10 litre tins with the least left over. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Limits

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: square footage of any rooms you draw, with paint, tile, drywall, flooring, carpet, roofing, pavers, brick, wallpaper, baseboard and deck board pages.

Every change on What’s new

How we make toolsReport a mistake

How the paint is worked out

Paint goes on walls, so the calculator starts from the room’s floor plan and its wall height: each wall’s length times the height, added up, less the doors and windows. That is the area you paint. Multiply by the number of coats and divide by the spread rate, the area a gallon or litre covers in one coat, and you have the paint. The calculator then rounds to cans you can buy: whole gallons plus quarts (three quarts or more become another gallon), or the mix of 1, 2.5, 5 and 10 litre tins with the least left over.

As a second example, a 16 × 14 ft living room with 9 ft ceilings, two doors and three 3 × 5 ft windows has 540 sq ft of wall, 455 after the openings. Two coats of a paint that covers 400 sq ft a gallon need 2.27 gallons: 2 gallons and 2 quarts.

Spread rates come from the paint’s data sheet and assume a smooth, primed wall. New drywall, rough plaster or a big colour change soak up more paint, which is why makers give a range: 350 to 400 sq ft a gallon for Sherwin-Williams Emerald, 250 to 400 for Behr Premium Plus. The calculator starts at 350; change it under More options to match your tin.

paint = (wall area − openings, + ceiling if painted) × coats ÷ spread rate

Paint for common rooms

8 ft walls, one 3 × 6¾ ft door and two 3 × 4 ft windows, two coats at 350 sq ft a gallon.

8 ft walls, one 3 × 6¾ ft door and two 3 × 4 ft windows, two coats at 350 sq ft a gallon.
RoomWalls to paintPaintBuy
10 × 10 ft276 sq ft1.58 gal2 gal
12 × 10 ft308 sq ft1.76 gal2 gal
12 × 12 ft340 sq ft1.94 gal2 gal
14 × 12 ft372 sq ft2.12 gal2 gal + 1 qt
16 × 14 ft436 sq ft2.49 gal2 gal + 2 qt
20 × 16 ft532 sq ft3.04 gal3 gal + 1 qt

Sources

Product names are trademarks of their owners; Binary Decimal is not affiliated with any of them. Their data sheets and guides are cited for the figures printed in them.

Common questions

How much paint do I need for a 12 × 12 room?

With 8 ft walls, one door and two windows, a 12 × 12 ft room has 340 sq ft of wall to paint. Two coats at 350 sq ft a gallon is 1.94 gal, so buy 2 gal. Add the ceiling and it is about 0.8 gallons more.

How many square feet does a gallon of paint cover?

Most interior wall paints say 250 to 400 sq ft a gallon for one coat: Sherwin-Williams gives 350 to 400 for Emerald, Behr 250 to 400 for Premium Plus. Rough, porous or new surfaces are at the low end. Dulux gives up to 17 m² a litre, about 690 sq ft a gallon at best.

Do I need two coats?

Usually: the data sheets above specify two coats on new or bare surfaces, and Dulux says one coat may do on a sound wall in a similar colour. A dark-to-light change can need a third, or a primer first.

Should I subtract doors and windows?

Yes, the calculator takes out each one you enter. Small ones barely matter, but a wall of windows or two big doors can cut the paint by a quart or more.