Brick Calculator
Bricks and mortar for a wall, from its length and height less any openings…
Bricks and mortar for a wall, from its length and height less any openings, for the brick size and joint you lay.
Brick
Doors
Windows
ExampleBricks to buy
567bricks
6.75 a square foot over 80 sq ft, with 5% for breakage.
Enter yours to see your result.
- Mortar, with 20% extra
- 5.2 cu ft
- Wall, less openings
- 80 sq ft
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms
How this works: 18 sources,
How this works
Method
Each brick takes up its own face plus half the joint round it, so the bricks per square foot are one over (brick length + joint) × (course height). A US modular brick is laid three courses to 8 inches with ⅜ inch joints, which gives 6.75 bricks a square foot, the figure in the Brick Industry Association’s Technical Note 10. A UK brick, 215 × 65 mm with 10 mm joints, comes to about 59 a square metre. Full method
Sources
- Technical Note 10, Dimensioning and Estimating Brick Masonry (Brick Industry Association, 2009)
- Emerald Interior Acrylic Latex product data sheet (Sherwin-Williams, 2023)
- BEHR PREMIUM PLUS Interior Eggshell Enamel No. 2050 technical data sheet (Behr, revised 9/2019)
- Dulux Trade Vinyl Matt data sheet 411 (AkzoNobel, 2025)
- Sheetrock Installation and Finish Guide (fastener, compound and tape calculator) (USG, 2003)
- Sheetrock UltraLight panels submittal sheet (sizes) (USG, 2010)
- Ultraflex 2 product data sheet (MAPEI, 2024)
- VersaBond Professional Tile Mortar, TDS-119 (Custom Building Products, 2026)
- Polyblend Plus Sanded Grout, TDS-360 (coverage chart) (Custom Building Products, 2026)
- Installation Essentials Guide for Laminate Flooring (Pergo)
- CRI 105, Standard for Installation of Residential Carpet (The Carpet and Rug Institute, 2019)
- Roofing Collection Product Guide (bundles, starter, hip and ridge, underlayment) (Owens Corning)
- Interlocking concrete pavement guide specification (PAV-TEC-009-13) (Interlocking Concrete Pavement Institute / CMHA, 2013)
- HP NextGel polymeric sand data sheet (Techniseal, 2023)
- Calculating wallpaper quantities (Farrow & Ball)
- Primed MDF baseboard mouldings (lengths) (Metrie)
- Decking Installation Guide (Trex)
- NIST Handbook 44 (2026), Appendix C: General tables of units of measurement (National Institute of Standards and Technology, 2026)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Limits
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: square footage of any rooms you draw, with paint, tile, drywall, flooring, carpet, roofing, pavers, brick, wallpaper, baseboard and deck board pages.
How the bricks are worked out
Each brick takes up its own face plus half the joint round it, so the bricks per square foot are one over (brick length + joint) × (course height). A US modular brick is laid three courses to 8 inches with ⅜ inch joints, which gives 6.75 bricks a square foot, the figure in the Brick Industry Association’s Technical Note 10. A UK brick, 215 × 65 mm with 10 mm joints, comes to about 59 a square metre.
For a 30 ft long, 8 ft high wall of modular brick with two 3 × 4 ft windows: 240 − 24 = 216 sq ft × 6.75 = 1,458 bricks, 1,531 with BIA’s 5% for breakage. Its mortar, with 20% extra, is about 14.1 cubic feet.
BIA says to add at least 5% to the net brick count and 15 to 25% to the net mortar, because mortar is lost in mixing and joints are never perfect. Its figures are for running or stack bond; patterns with headers, such as common bond, take about a fifth more brick.
bricks per area = 1 ÷ ((length + joint) × course height); mortar = joint volume round each brick
- Modular brick with ⅜ in joints: 675 per 100 sq ft and 8.1 cu ft of mortar per 1,000 brick; add at least 5% to the brick and 15 to 25% to the mortar. Source: Technical Note 10, Dimensioning and Estimating Brick Masonry.
Bricks and mortar by size and joint
Running bond, before waste. Mortar per 1,000 bricks, worked out from the joint volume.
| Brick | Bricks | Per 100 sq ft or 10 m² | Mortar per 1,000 |
|---|---|---|---|
| Modular, ⅜ in joints | 6.75 per sq ft | 675 per 100 sq ft | 8.1 cu ft |
| Standard, ⅜ in joints | 6.55 per sq ft | 655 per 100 sq ft | 8.4 cu ft |
| Standard, ½ in joints | 6.16 per sq ft | 616 per 100 sq ft | 11.3 cu ft |
| UK 215 × 65 mm, 10 mm joints | 59.3 per m² | 593 per 10 m² | 0.30 m³ |
| UK 215 × 65 mm, 12 mm joints | 57.2 per m² | 572 per 10 m² | 0.36 m³ |
Sources
Product names are trademarks of their owners; Binary Decimal is not affiliated with any of them. Their data sheets and guides are cited for the figures printed in them.
Common questions
How many bricks per square foot?
About 6.75 for US modular brick (BIA Technical Note 10), and 6.55 for standard brick with ⅜ in joints. Thicker joints take more mortar: BIA gives 8.1 cu ft per 1,000 modular bricks with ⅜ in joints and 10.3 with ½ in.
How many bricks per square metre?
About 60 for a UK brick, 215 × 65 mm with 10 mm joints: 1 ÷ (0.225 × 0.075) = 59.3, usually rounded up to 60. Double that for a wall two bricks thick.
How much mortar for 1,000 bricks?
BIA’s table gives 8.1 cu ft for modular brick with ⅜ in joints and 10.3 with ½ in, before the 15 to 25% it advises adding. This calculator works the mortar out from the joint size, so it follows the joint you set.