Skip to content

Drywall Calculator

Sheets for the walls and ceiling, laid out wall by wall so offcuts get used…

Sheets for the walls and ceiling, laid out wall by wall so offcuts get used, and the compound, tape and screws to finish them.

Rooms120 sq ft
12′10′
ft
ft
How many1
ft

Sheet size

Doors

1
ft
ft

Windows

2
ft
ft

ExampleSheets to buy

16sheets of 4 × 8 ft

472 sq ft of walls and ceiling; 5 for the ceiling alone.

Enter yours to see your result.

12′10′12′10′
Joint compound
59 lb
Paper tape
158 ft
Screws
1.2 lb

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms

My home

Save the rooms you measure once, then open any of them on the paint, flooring, tile or baseboard pages. They stay on this device.

My shopping list

Add each part of a job and print one list: a room is paint, flooring and baseboard; a patio is base, sand and pavers. It stays on this device.

How this works: 19 sources,

How this works

Method

Drywall comes in sheets 4 ft wide, 8, 10 or 12 ft long, hung horizontally across the studs. So the calculator works wall by wall: each wall is split into courses 4 ft high, each course into sheet lengths, and the pieces are packed into whole sheets, using the offcut from one wall on the next before starting a new sheet. Doors and windows are sheeted over and cut out, as hangers do, so they don’t reduce the sheet count, but they do reduce the taping and mud. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Limits

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: square footage of any rooms you draw, with paint, tile, drywall, flooring, carpet, roofing, pavers, brick, wallpaper, baseboard and deck board pages.

Every change on What’s new

How we make toolsReport a mistake

How the drywall is worked out

Drywall comes in sheets 4 ft wide, 8, 10 or 12 ft long, hung horizontally across the studs. So the calculator works wall by wall: each wall is split into courses 4 ft high, each course into sheet lengths, and the pieces are packed into whole sheets, using the offcut from one wall on the next before starting a new sheet. Doors and windows are sheeted over and cut out, as hangers do, so they don’t reduce the sheet count, but they do reduce the taping and mud.

For a 14 × 12 ft room with 8 ft walls in 4 × 12 ft sheets: two courses round 52 ft of wall, packed, take 9 sheets. Longer sheets mean fewer joints to tape, which is why many pros prefer 12 ft sheets when they can get them into the room.

The finishing materials follow USG’s calculator per 1,000 sq ft of panels: about 370 ft of paper tape, 138 lb of ready-mixed all-purpose joint compound and 2.7 lb of Type W screws. USG notes these are approximate and vary with the job; they are a fair basis for the first trip to the store.

sheets = pieces of each course packed into sheet lengths; tape, mud, screws = area ÷ 1,000 × USG rates

Drywall sheets for common rooms

8 ft walls, one door and two windows. Sheets packed wall by wall with offcuts reused; compound for walls and ceiling.

8 ft walls, one door and two windows. Sheets packed wall by wall with offcuts reused; compound for walls and ceiling.
Room4 × 8 walls4 × 8 with ceiling4 × 12 with ceilingCompound
10 × 10 ft10141152 lb
12 × 10 ft11161159 lb
12 × 12 ft12171167 lb
14 × 12 ft14201374 lb
16 × 14 ft16241691 lb
20 × 16 ft182820118 lb

Sources

Product names are trademarks of their owners; Binary Decimal is not affiliated with any of them. Their data sheets and guides are cited for the figures printed in them.

Common questions

How many sheets of drywall for a 12 × 12 room?

With 8 ft walls in 4 × 8 ft sheets, 12 for the walls, 17 with the ceiling. In 4 × 12 ft sheets the walls and ceiling take 11.

Do I subtract doors and windows?

Not from the sheets: they are usually hung over openings and cut out afterwards, which keeps joints away from the corners of doors and windows. The calculator still takes them off the area used for tape and compound.

How much joint compound do I need?

USG’s figure is about 138 lb of ready-mixed all-purpose compound per 1,000 sq ft of panels, for taping, filling and finishing joints, corners and fasteners.