Skip to content

Wallpaper Calculator

Rolls of wallpaper for your room, counted strip by strip…

Rolls of wallpaper for your room, counted strip by strip, with each drop rounded up to the pattern repeat so the pattern lines up.

Rooms120 sq ft
12′10′
ft
ft
How many1
ft
in
ft
in

The roll’s size and the pattern repeat are on its label; 0 for a paper with no pattern to match.

Doors

1
ft
ft

Windows

2
ft
ft
More optionsNo extra roll

ExampleRolls to buy

9rolls

27 strips of 8′ 9″, 3 from each roll.

Enter yours to see your result.

12′10′12′10′
Drop with the repeat
8′ 9″
Strips saved by openings
1

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms

My home

Save the rooms you measure once, then open any of them on the paint, flooring, tile or baseboard pages. They stay on this device.

My shopping list

Add each part of a job and print one list: a room is paint, flooring and baseboard; a patio is base, sand and pavers. It stays on this device.

How this works: 18 sources,

How this works

Method

Wallpaper is hung in strips, or drops, the height of the wall. Each wall needs its length divided by the roll width, rounded up, and each roll gives as many drops as fit in its length. With a pattern, every drop has to start at the same point in the pattern, so its length rounds up to a whole number of repeats: an 8 ft wall with a 21 inch repeat needs drops of 105 inches, and a 33 ft roll gives three of them, not four. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Limits

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: square footage of any rooms you draw, with paint, tile, drywall, flooring, carpet, roofing, pavers, brick, wallpaper, baseboard and deck board pages.

Every change on What’s new

How we make toolsReport a mistake

How the wallpaper is worked out

Wallpaper is hung in strips, or drops, the height of the wall. Each wall needs its length divided by the roll width, rounded up, and each roll gives as many drops as fit in its length. With a pattern, every drop has to start at the same point in the pattern, so its length rounds up to a whole number of repeats: an 8 ft wall with a 21 inch repeat needs drops of 105 inches, and a 33 ft roll gives three of them, not four.

For a 14 × 12 ft room with 9 ft walls in plain paper from 20.5 inch, 33 ft rolls: 34 strips of 9 ft, 3 to a roll, so 12 rolls. Doors save the strips they cover; windows save none, because the paper still goes above and below them and each short piece needs its own match.

Roll sizes differ by maker and country, so take the width, length and repeat from the label. Farrow & Ball’s rolls are 10 m by 53 cm, and it advises buying one extra roll, which you can add under More options, so you have paper from the same batch for mistakes and repairs.

rolls = ⌈ strips ÷ ⌊ roll length ÷ drop ⌋ ⌉; drop = wall height rounded up to whole repeats

  • Rolls are 10 m long and 53 cm wide; a 2.4 m room gets three drops a roll with small pattern repeats and two with large ones; buy one extra roll. Source: Calculating wallpaper quantities.

Drops per roll by wall height and repeat

20.5 in × 33 ft rolls; the last column is a 12 × 10 ft room with no openings.

20.5 in × 33 ft rolls; the last column is a 12 × 10 ft room with no openings.
Wall heightRepeatDropDrops per rollRolls for 12 × 10 ft
8 ftnone8.00 ft47
8 ft10.5 in8.75 ft310
8 ft21 in8.75 ft310
9 ftnone9.00 ft310
9 ft21 in10.50 ft310
10 ft25 in10.42 ft310

Sources

Product names are trademarks of their owners; Binary Decimal is not affiliated with any of them. Their data sheets and guides are cited for the figures printed in them.

Common questions

How many rolls of wallpaper do I need?

Count the strips (each wall ÷ the roll width, rounded up), then divide by how many drops a roll gives (roll length ÷ the drop, rounded down). A 12 × 10 ft room with 8 ft walls and a 21 inch repeat takes 28 strips at 3 a roll: 10 rolls, before openings.

What is a pattern repeat?

The distance before the pattern starts again down the paper, printed on the label. Each strip has to start at the same point in it, so drops are rounded up to whole repeats and longer repeats waste more paper.

Should I subtract doors and windows?

Only doors, and only the strips they are wide enough to cover: one for most doors. Above and below a window the paper still goes up, and with a pattern each short piece has to match, so the calculator takes nothing off for windows.