Pea Gravel Calculator
Pea gravel for a round patio, a path or a play area, in yards, tons and bags…
Pea gravel for a round patio, a path or a play area, in yards, tons and bags, for any shape you draw.
More options0% extra · 2,500 lb/yd³ loose
Extra to allow
For spillage and uneven ground. A compacted layer’s own shrinkage is counted separately, from the loose and compacted weights.
MoDOT’s tables put loose pea gravel at 2,410 to 2,700 lb/yd³. Your supplier’s figure is better: put it here.
TxDOT: tandem dump trucks usually carry 12 or 14 cubic yards; single-axle trucks about 6.
ExamplePea gravel to order
1.31tons
1.05 cu yd loose.
Enter yours to see your result.
Bag size
- In bags
- 53 × 50 lb
- Area
- 113.1 sq ft
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms
My shopping list
Add each part of a job and print one list: a paver patio is base stone, bedding sand and the pavers; a fence is post holes. It stays on this device.
How this works: 10 sources,
How this works
Method
Pea gravel is small, rounded stone that doesn’t pack down. So unlike a driveway base it is measured and bought loose: the volume of the area times its depth, and the weight from a loose weight per cubic yard. Rounded stone packs a little tighter than crushed rock, so the default sits in the crushed rock range from MoDOT’s tables and the editable figure runs up to Designing Buildings’ indicative 1,600 kg/m³ for pea gravel. Full method
Sources
- Highway Maintenance Tables and Conversion Factors: loose and compacted weights of materials (Missouri Department of Transportation, Engineering Policy Guide)
- Converting between weight and volume for bulk construction materials (Designing Buildings Wiki)
- QUIKRETE Concrete Mix (No. 1101) data sheet (QUIKRETE, revised October 2022)
- Sakrete High Strength Concrete Mix data sheet (Sakrete (Oldcastle APG), REV 7-10)
- Sakrete Concrete Mix product data sheet (30 kg) (Sika Canada)
- CIP 31, Ordering Ready Mixed Concrete (National Ready Mixed Concrete Association, 2023)
- CIP 8, Discrepancies in Yield (National Ready Mixed Concrete Association)
- International Residential Code 2021: R311.3, R311.7.5, R403.1.1, R506.1 (International Code Council, 2021)
- Seal Coat and Surface Treatment Manual: haul trucks, size (Texas Department of Transportation)
- NIST Handbook 44 (2026), Appendix C: General tables of units of measurement (National Institute of Standards and Technology, 2026)
Limits
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: draw any area and see bags on a pallet, yards or trucks, with 14 job and material pages and a shopping list kept on your device.
How pea gravel is worked out
Pea gravel is small, rounded stone that doesn’t pack down. So unlike a driveway base it is measured and bought loose: the volume of the area times its depth, and the weight from a loose weight per cubic yard. Rounded stone packs a little tighter than crushed rock, so the default sits in the crushed rock range from MoDOT’s tables and the editable figure runs up to Designing Buildings’ indicative 1,600 kg/m³ for pea gravel.
For a path 3 ft wide and 50 ft long, 2 inches deep: 150 sq ft × 2 ÷ 324 = 0.93 cubic yards, about 1.16 tons, or 47 bags of 50 lb. Bags suit a small path; for anything bigger, get a price for a bulk load from a landscape yard and compare.
Draw round patios as circles and fire pit surrounds as rings, so the pit itself is left out. Edging matters with pea gravel because it rolls: the outline length is shown under the shapes when you need to buy edging.
tons = area × depth ÷ 324 × loose weight (lb/yd³) ÷ 2,000; bags = weight ÷ bag weight
- Loose crushed granite or limestone weighs 2,410 to 2,590 lb per cubic yard. Source: Highway Maintenance Tables and Conversion Factors: loose and compacted weights of materials.
- Pea gravel’s indicative loose bulk density is about 1,600 kg/m³ (1.35 tons per cubic yard). Source: Converting between weight and volume for bulk construction materials.
Pea gravel for patios, paths and play areas
Loose, at 2,500 lb per cubic yard; bags of 50 lb.
| Area | Depth | Cubic yards | Tons | 50 lb bags |
|---|---|---|---|---|
| Circle, 8 ft across | 3 in | 0.47 yd³ | 0.58 tons | 24 |
| Circle, 12 ft across | 3 in | 1.05 yd³ | 1.31 tons | 53 |
| Path 3 × 30 ft | 2 in | 0.56 yd³ | 0.69 tons | 28 |
| Path 4 × 40 ft | 3 in | 1.48 yd³ | 1.85 tons | 75 |
| Play area 10 × 10 ft | 9 in | 2.78 yd³ | 3.47 tons | 139 |
| Patio 12 × 14 ft | 3 in | 1.56 yd³ | 1.94 tons | 78 |
Common questions
How deep should pea gravel be?
For a path or patio, about 2 to 3 inches over a firm, compacted base, so it doesn’t shift underfoot; deeper layers feel loose to walk on. Play areas need much more, as a cushioning surface: check the depth the play equipment maker or safety guidance gives for its fall height.
How many bags of pea gravel make a yard?
At 2,500 lb per cubic yard, a yard is about 50 bags of 50 lb. Bag weights and stone vary, so check the volume printed on the bag if it gives one.
Does pea gravel need a weed barrier?
A landscape fabric under it keeps the stone from sinking into soil and slows weeds, and many people put a layer of crushed stone under it for a firmer path. Work out that base on the crushed stone page and add it to your list.