Standard Resistor Values (E12, E24, E96)
Resistors come in set values.
Resistors come in set values. Type the resistance your circuit needs to get the nearest one you can buy in each series, and how far off it is.
Type 350, 4.3k, 4k3 or 1.5M.
E24: 24 values per decade, usually ±5% parts.
ExampleNearest E24 value
360Ω
350 Ω falls between 330 Ω and 360 Ω in the E24 series; 360 Ω is +2.9% from it, inside the series’ usual ±5% tolerance.
Type the resistance your circuit needs.
One decade on a log scale: every E24 value as a tick, the nearest one bold, yours as the arrow.
- Nearest E12
- 330 Ω (−5.7%)
- Nearest E96
- 348 Ω (−0.57%)
- Next value down
- 330 Ω (−5.7%)
How this works: 8 sources,
How this works
Method
Resistor values follow the IEC 60063 E-series, a set of numbers spread evenly on a log scale so that, with each part’s tolerance, the values cover every resistance with no gaps. The E12 series has 12 values per decade for 10% parts (10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82), the E24 adds 12 more for 5% parts, and E96 has 96 for 1% parts. Full method
Sources
- IEC 60063:2015, Preferred number series for resistors and capacitors (IEC, 2015)
- E series of preferred numbers (Wikipedia)
- IEC 60062:2016+AMD1:2019, Marking codes for resistors and capacitors (IEC, 2016)
- Electronic color code (the IEC 60062:2016 table) (Wikipedia)
- University Physics Volume 2, §10.2 Resistors in Series and Parallel (OpenStax (Ling, Sanny and Moebs), 2016)
- University Physics Volume 2, §8.2 Capacitors in Series and in Parallel (OpenStax (Ling, Sanny and Moebs), 2016)
- Light-emitting diode: colours, wavelengths and voltage drops (Wikipedia)
- SD-18 Part Requirements and Application Guide: Resistors, derating (NAVSEA, NSWC Crane)
How it’s tested
One worked example for this page is checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: the colour code on a resistor you can tap, with series and parallel, capacitors, voltage divider, LED resistor, SMD code and standard value pages.
Why resistors come in these values
Resistor values follow the IEC 60063 E-series, a set of numbers spread evenly on a log scale so that, with each part’s tolerance, the values cover every resistance with no gaps. The E12 series has 12 values per decade for 10% parts (10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82), the E24 adds 12 more for 5% parts, and E96 has 96 for 1% parts.
The same numbers repeat in every decade: 4.7 Ω, 47 Ω, 470 Ω, 4.7 kΩ, 47 kΩ. Each value is roughly the one before times the n-th root of 10 (1.21 for E12, 1.10 for E24, 1.024 for E96). E48 and up follow that rule rounded to three figures; E24 and below keep older rounded values, so 27 is not exactly 26.1.
Because the spacing is by ratio, the nearest standard value is found by ratio too: 350 Ω is 6.1% above 330 and 2.9% below 360, so 360 Ω is nearest in E24. For an LED resistor or a current limit, round up instead; for a divider, choose the pair whose ratio is closest.
Eₙ value ≈ 10^(i/n), i = 0 … n − 1, rounded (3 figures for E48 to E192)
- IEC 60063:2015 sets the E3 to E192 series of preferred values for resistors and capacitors. Source: IEC 60063:2015, Preferred number series for resistors and capacitors.
- In the E192 series one value breaks the rule: 9.20 is used where 10^(185/192) rounds to 9.19. Source: E series of preferred numbers.
The E24 and E12 values
Every E24 value in one decade; the E12 ones are marked. Multiply by 10, 100, 1,000 for the other decades.
| Value | Series | In other decades |
|---|---|---|
| 100 | E12, E24 | 100 Ω · 1 kΩ · 10 kΩ |
| 110 | E24 | 110 Ω · 1.1 kΩ · 11 kΩ |
| 120 | E12, E24 | 120 Ω · 1.2 kΩ · 12 kΩ |
| 130 | E24 | 130 Ω · 1.3 kΩ · 13 kΩ |
| 150 | E12, E24 | 150 Ω · 1.5 kΩ · 15 kΩ |
| 160 | E24 | 160 Ω · 1.6 kΩ · 16 kΩ |
| 180 | E12, E24 | 180 Ω · 1.8 kΩ · 18 kΩ |
| 200 | E24 | 200 Ω · 2 kΩ · 20 kΩ |
| 220 | E12, E24 | 220 Ω · 2.2 kΩ · 22 kΩ |
| 240 | E24 | 240 Ω · 2.4 kΩ · 24 kΩ |
| 270 | E12, E24 | 270 Ω · 2.7 kΩ · 27 kΩ |
| 300 | E24 | 300 Ω · 3 kΩ · 30 kΩ |
Show all 24 rowsShow fewer
| 330 | E12, E24 | 330 Ω · 3.3 kΩ · 33 kΩ |
| 360 | E24 | 360 Ω · 3.6 kΩ · 36 kΩ |
| 390 | E12, E24 | 390 Ω · 3.9 kΩ · 39 kΩ |
| 430 | E24 | 430 Ω · 4.3 kΩ · 43 kΩ |
| 470 | E12, E24 | 470 Ω · 4.7 kΩ · 47 kΩ |
| 510 | E24 | 510 Ω · 5.1 kΩ · 51 kΩ |
| 560 | E12, E24 | 560 Ω · 5.6 kΩ · 56 kΩ |
| 620 | E24 | 620 Ω · 6.2 kΩ · 62 kΩ |
| 680 | E12, E24 | 680 Ω · 6.8 kΩ · 68 kΩ |
| 750 | E24 | 750 Ω · 7.5 kΩ · 75 kΩ |
| 820 | E12, E24 | 820 Ω · 8.2 kΩ · 82 kΩ |
| 910 | E24 | 910 Ω · 9.1 kΩ · 91 kΩ |
Common questions
Why is there no 50 Ω or 500 Ω resistor?
The series are spaced by ratio, not round numbers: between 47 and 56 (E12) or 47, 51 and 56 (E24). Round numbers such as 50 Ω exist as special parts (RF terminations), and E96 has 49.9 Ω.
Which series should I use?
E12 is what most hobby kits contain, E24 is common for 5% and 1% parts, and E96 is standard for 1% surface-mount resistors. Use the finest series you can easily buy when the exact value matters.
Do capacitors use the same series?
Yes. IEC 60063 covers resistors and capacitors, although capacitors are usually stocked in the coarser E6 and E12 values, such as 1, 2.2, 4.7, 10, 22 and 47 µF.