Skip to content

Parallel Resistor Calculator

The total resistance of resistors side by side…

The total resistance of resistors side by side, how the current shares out between them, and what to add in parallel to hit a value you can’t buy.

Resistors
Ω
Ω

Type 220, 4.7k, 4k7 or 1M.

V

To see the current and how it shares out.

Reach a target valueWhat to add to get a value you can’t buy

Type the total you want, such as 150 or 2.2k.

ExampleTotal resistance

132Ω

220 Ω and 330 Ω in parallel make 132 Ω, less than the smallest of them.

Type your own values to see your total.

220 Ω22.73 mA330 Ω15.15 mA

Bars: each branch’s share of the current. The smallest resistor takes the most.

Current from 5 V
37.88 mA
Power, all together
189.4 mW
How this works: 8 sources,

How this works

Method

Resistors in parallel all have the same voltage across them, and the current divides between them, so the total resistance is lower than the smallest one. Add their conductances, 1 ÷ R, and turn the sum back over: 220 Ω and 330 Ω give 1 ÷ (1/220 + 1/330) = 1 ÷ 0.007576 = 132 Ω. Full method

How it’s tested

3 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: the colour code on a resistor you can tap, with series and parallel, capacitors, voltage divider, LED resistor, SMD code and standard value pages.

Every change on What’s new

How we make toolsReport a mistake

How to add resistors in parallel

Resistors in parallel all have the same voltage across them, and the current divides between them, so the total resistance is lower than the smallest one. Add their conductances, 1 ÷ R, and turn the sum back over: 220 Ω and 330 Ω give 1 ÷ (1/220 + 1/330) = 1 ÷ 0.007576 = 132 Ω.

For exactly two resistors there is a shortcut, product over sum: (220 × 330) ÷ (220 + 330) = 72,600 ÷ 550 = 132 Ω. Two equal resistors in parallel make half of one, three make a third, and a very large resistor in parallel with a small one barely changes it.

Parallel combinations are the usual way to make a value the shops don’t sell. To get 150 Ω from a 220 Ω you already have, the other resistor must be 1 ÷ (1/150 − 1/220) = 471 Ω, and the standard 470 Ω lands within 0.2%. The calculator’s “Reach a target value” does this sum for you.

1/R = 1/R₁ + 1/R₂ + … + 1/Rₙ · for two: R = R₁R₂ ÷ (R₁ + R₂)

Common resistor pairs in parallel

Two standard values in parallel and the total, worked out by the calculator’s own code.

Two standard values in parallel and the total, worked out by the calculator’s own code.
R₁R₂In parallelNearest E24
100 Ω100 Ω50 Ω51 Ω
220 Ω330 Ω132 Ω130 Ω
470 Ω470 Ω235 Ω240 Ω
1 kΩ1 kΩ500 Ω510 Ω
1 kΩ2.2 kΩ687.5 Ω680 Ω
1 kΩ4.7 kΩ824.6 Ω820 Ω
2.2 kΩ3.3 kΩ1.32 kΩ1.3 kΩ
4.7 kΩ10 kΩ3.197 kΩ3.3 kΩ
10 kΩ10 kΩ5 kΩ5.1 kΩ
10 kΩ22 kΩ6.875 kΩ6.8 kΩ
Show all 12 rows
47 kΩ100 kΩ31.97 kΩ33 kΩ
100 kΩ1 MΩ90.91 kΩ91 kΩ

Common questions

Why is the total smaller than the smallest resistor?

Each resistor you add in parallel opens another path for the current, so the same voltage pushes more current in total. More current at the same voltage means less resistance overall.

What do two equal resistors in parallel make?

Half of one: two 1 kΩ resistors make 500 Ω. N equal resistors make R ÷ N, and they share the power equally, so ten 1 W resistors in parallel can handle 10 W between them.

How do I get a value I can’t buy?

Put a second resistor in parallel with a larger standard value. Enter the one you have and type the target under “Reach a target value”: the calculator gives the resistor to add and the nearest standard part.

Does tolerance matter in parallel?

The tolerance of the combination is at most the worst tolerance of the parts: two 5% resistors in parallel stay within 5%. Errors in opposite directions partly cancel.