Series Resistor Calculator
Resistors in a row add up.
Resistors in a row add up. See the total, the voltage each one drops and the power each one takes, or find the one to add for a target.
To see the current and how it shares out.
Reach a target valueWhat to add to get a value you can’t buy
Type the total you want, such as 150 or 2.2k.
ExampleTotal resistance
7.9kΩ
1 kΩ, 2.2 kΩ and 4.7 kΩ in series make 7.9 kΩ, more than the largest of them.
Type your own values to see your total.
Bars: each resistor’s share of the voltage. The same current flows through all of them.
- Current from 12 V
- 1.519 mA
- Power, all together
- 18.23 mW
How this works: 8 sources,
How this works
Method
Resistors in series carry the same current one after another, so their resistances simply add: 1 kΩ + 2.2 kΩ + 4.7 kΩ = 7.9 kΩ. The total is always more than the largest one. Full method
Sources
- University Physics Volume 2, §10.2 Resistors in Series and Parallel (OpenStax (Ling, Sanny and Moebs), 2016)
- IEC 60062:2016+AMD1:2019, Marking codes for resistors and capacitors (IEC, 2016)
- IEC 60063:2015, Preferred number series for resistors and capacitors (IEC, 2015)
- Electronic color code (the IEC 60062:2016 table) (Wikipedia)
- University Physics Volume 2, §8.2 Capacitors in Series and in Parallel (OpenStax (Ling, Sanny and Moebs), 2016)
- E series of preferred numbers (Wikipedia)
- Light-emitting diode: colours, wavelengths and voltage drops (Wikipedia)
- SD-18 Part Requirements and Application Guide: Resistors, derating (NAVSEA, NSWC Crane)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: the colour code on a resistor you can tap, with series and parallel, capacitors, voltage divider, LED resistor, SMD code and standard value pages.
How to add resistors in series
Resistors in series carry the same current one after another, so their resistances simply add: 1 kΩ + 2.2 kΩ + 4.7 kΩ = 7.9 kΩ. The total is always more than the largest one.
The voltage divides in proportion to the resistances. With 12 V across that chain, the current is 12 ÷ 7,900 = 1.52 mA, and the resistors drop 1.52 V, 3.34 V and 7.14 V. The biggest resistor takes the biggest share of the voltage and the power, which is why a series resistor that is much larger than the rest decides the current almost on its own.
Series chains are used to drop a voltage, to build dividers and to reach a higher value than you have: 4.7 kΩ + 330 Ω gives 5.03 kΩ for a 5 kΩ target. Each resistor must be rated for the power it takes, I² × R.
R = R₁ + R₂ + … + Rₙ · I = V ÷ R · Vₖ = I × Rₖ
- In OpenStax’s Example 10.2, four 20 Ω resistors and one 10 Ω resistor in series make 90 Ω; a 9 V battery drives 0.1 A, and each 20 Ω resistor drops 2 V and dissipates 0.2 W. Source: University Physics Volume 2, §10.2 Resistors in Series and Parallel.
- Kirchhoff’s loop rule says the voltage drops around a series loop add up to the source voltage. Source: University Physics Volume 2, §10.2 Resistors in Series and Parallel.
Voltage across each resistor in a 12 V series chain
The same 12 V across different pairs: the current and how the voltage splits.
| R₁ | R₂ | Total | Current | V across R₁ | V across R₂ |
|---|---|---|---|---|---|
| 100 Ω | 100 Ω | 200 Ω | 60 mA | 6 V | 6 V |
| 330 Ω | 1 kΩ | 1.33 kΩ | 9.023 mA | 2.98 V | 9.02 V |
| 1 kΩ | 1 kΩ | 2 kΩ | 6 mA | 6 V | 6 V |
| 1 kΩ | 2.2 kΩ | 3.2 kΩ | 3.75 mA | 3.75 V | 8.25 V |
| 1 kΩ | 4.7 kΩ | 5.7 kΩ | 2.105 mA | 2.11 V | 9.89 V |
| 2.2 kΩ | 2.2 kΩ | 4.4 kΩ | 2.727 mA | 6 V | 6 V |
| 4.7 kΩ | 1 kΩ | 5.7 kΩ | 2.105 mA | 9.89 V | 2.11 V |
| 10 kΩ | 1 kΩ | 11 kΩ | 1.091 mA | 10.9 V | 1.09 V |
| 10 kΩ | 4.7 kΩ | 14.7 kΩ | 816.3 µA | 8.16 V | 3.84 V |
| 10 kΩ | 10 kΩ | 20 kΩ | 600 µA | 6 V | 6 V |
Show all 12 rowsShow fewer
| 22 kΩ | 10 kΩ | 32 kΩ | 375 µA | 8.25 V | 3.75 V |
| 100 kΩ | 10 kΩ | 110 kΩ | 109.1 µA | 10.9 V | 1.09 V |
Common questions
Do resistors in series have the same current?
Yes. There is only one path, so every resistor carries the same current. It is the voltage that differs: each one drops I × R.
Which resistor gets hottest in series?
The largest. Power is I² × R and the current is the same through all of them, so the power goes up with the resistance. Check each one against its rating.
Can I put resistors in series to handle more voltage?
Yes, and it is common in high-voltage dividers: each resistor has a maximum working voltage as well as a power rating, and a chain shares the voltage between them.