Amps to Watts Calculator
How much power a current carries at a given voltage, in watts and kilowatts.
How much power a current carries at a given voltage, in watts and kilowatts. For AC, the power factor says how much of it does real work.
1 for heaters, kettles and lamps; often 0.7 to 0.9 for motors.
ExampleReal power
2,990W
13 A from a 230 V single-phase supply delivers 2,990 W.
Enter your own values to see your result.
The dots speed up with more current; the load glows brighter with more power.
- Apparent power
- 2.99 kVA
- Energy in an hour
- 2.99 kWh
- At 120 V
- 1,560 W
Circuit physics for learning and planning, not wiring advice: installations must follow your local electrical code and a qualified electrician. Terms
How this works: 8 sources,
How this works
Method
Multiply the current by the voltage. Ten amps on a 12 V battery is 120 W; the same 10 A from a 230 V socket is 2,300 W. This is P = V × I, the definition of electrical power, and it holds for DC and for AC loads that only heat. Full method
Sources
- University Physics Volume 2, §9.5 Electrical Energy and Power (OpenStax (Ling, Sanny and Moebs), 2016)
- IEEE Std 1459-2010, Definitions for the Measurement of Electric Power Quantities (IEEE, 2010)
- University Physics Volume 2, §9.4 Ohm’s Law (OpenStax (Ling, Sanny and Moebs), 2016)
- University Physics Volume 2, §15.4 Power in an AC Circuit (OpenStax (Ling, Sanny and Moebs), 2016)
- The International System of Units (SI Brochure), 9th edition (BIPM, 2019)
- AC Electrical Circuit Analysis, §9.3 Three-Phase Connections (James M. Fiore, LibreTexts)
- AC Electrical Circuit Analysis, §9.4 Power Factor Correction (James M. Fiore, LibreTexts)
- IEC 60038:2009+AMD1:2021, IEC standard voltages (IEC, 2009)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Limits
Circuit physics for learning and planning, not wiring advice: installations must follow your local electrical code and a qualified electrician.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: Ohm’s law from any two values with a live circuit and the formula wheel, plus watts to amps, amps to watts, kW and kVA to amps, three-phase power and power factor pages.
How to convert amps to watts
Multiply the current by the voltage. Ten amps on a 12 V battery is 120 W; the same 10 A from a 230 V socket is 2,300 W. This is P = V × I, the definition of electrical power, and it holds for DC and for AC loads that only heat.
For other AC loads, multiply by the power factor too. Volts times amps then gives the apparent power in volt-amperes (VA), the current the wiring has to carry, and the power factor says how much of it the load actually uses. A 13 A load on 230 V is 2,990 VA; at a power factor of 0.9 it uses 2,691 W.
A three-phase supply multiplies by √3 as well, when the voltage is the one between two lines: 50 A on a 480 V three-phase motor at a power factor of 0.9 is 1.732 × 480 × 50 × 0.9 = 37.4 kW. With the voltage from a line to neutral (277 V on that system), multiply by 3 instead.
DC: P = V × I · AC single phase: P = V × I × PF · three phase: P = √3 × V × I × PF
- Electrical power is the rate energy is delivered, P = IV: a motor drawing 20.00 A from 115 V uses 2,300 W (OpenStax Example 9.9). Source: University Physics Volume 2, §9.5 Electrical Energy and Power.
- IEEE 1459 defines apparent power S = V × I (in VA) and power factor as the ratio of active power to apparent power, P ÷ S. Source: IEEE Std 1459-2010, Definitions for the Measurement of Electric Power Quantities.
Amps to watts at common voltages
Power at a power factor of 1. Multiply by the power factor for motors and electronics.
| Amps | 12 V DC | 120 V | 230 V | 240 V |
|---|---|---|---|---|
| 1 A | 12 W | 120 W | 230 W | 240 W |
| 2 A | 24 W | 240 W | 460 W | 480 W |
| 5 A | 60 W | 600 W | 1,150 W | 1,200 W |
| 6 A | 72 W | 720 W | 1,380 W | 1,440 W |
| 10 A | 120 W | 1,200 W | 2,300 W | 2,400 W |
| 13 A | 156 W | 1,560 W | 2,990 W | 3,120 W |
| 15 A | 180 W | 1,800 W | 3,450 W | 3,600 W |
| 16 A | 192 W | 1,920 W | 3,680 W | 3,840 W |
| 20 A | 240 W | 2,400 W | 4,600 W | 4,800 W |
| 25 A | 300 W | 3,000 W | 5,750 W | 6,000 W |
Show all 14 rowsShow fewer
| 30 A | 360 W | 3,600 W | 6,900 W | 7,200 W |
| 32 A | 384 W | 3,840 W | 7,360 W | 7,680 W |
| 40 A | 480 W | 4,800 W | 9,200 W | 9,600 W |
| 50 A | 600 W | 6,000 W | 11,500 W | 12,000 W |
Common questions
How many watts is 15 amps?
1,800 W at 120 V, 3,450 W at 230 V and 3,600 W at 240 V, at a power factor of 1. On a 12 V DC system the same 15 A is only 180 W.
What is the difference between watts and VA?
Volt-amperes (VA) are volts times amps, whatever the load does with them; watts are the part that does real work or makes heat. They are equal for heaters and lamps (power factor 1), and watts are lower for motors and electronics. Generators, UPS units and transformers are rated in VA or kVA because the current heats them either way.
How many watts can a 13 A or 16 A socket supply?
At 230 V, 13 A is 2,990 W and 16 A is 3,680 W at power factor 1. That is the physics of the rating only: what a circuit may safely carry depends on its wiring, protection and your local rules, which this calculator does not check.