Skip to content

Picket Fence Calculator

Pickets for a run of fence at the width and gap you choose, with the posts…

Pickets for a run of fence at the width and gap you choose, with the posts, rails and gate, and a stretch of it drawn to scale.

ft

Gates

1

Height

Posts at most

ft
More options3½ in posts · 3½ in pickets, 2½ in gap · 2 rails · 2 ft in the ground · prices

Posts

in
in

Rails per section

in

QUIKRETE’s rule buries a third of the post and adds 6 in of gravel. Where the ground freezes, go below the frost line your building department gives.

Concrete bags

Your prices (optional, each)

$
$
$
$
$

ExamplePicket fence

94pickets

50 ft of fence with 1 gate: 6 sections between 8 posts, 12 rails and 94 pickets.

Enter yours to see your result.

50 ft
From above: 8 posts, sides numbered in the order you entered them, gates drawn open, swinging into the yard.
2 ft in the ground4 ft7 ft 8 in on centre
A stretch of side 1 in elevation: sections of 7 ft 8 in on centre, each post 2 ft into the ground in a 10½ in hole of concrete on 6 in of gravel.
What to buy
Posts8 × 6 ft
Rails12 × 8 ft
Pickets94 × 4 ft
Gates1 × 4 ft
Concrete16 × 80 lb
Gravel2.4 cu ft

Concrete per hole and bag sizes: post hole concrete calculator.

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms

My shopping list

Add each part of a job and print one list. It stays on this device.

How this works: 4 sources,

How this works

Method

Pickets stand side by side with a gap between them, so each one takes its own width plus a gap along the fence. Along a stretch of length L, with pickets w wide and gaps g, the count is (L + g) ÷ (w + g), rounded up: the extra g is because the last picket needs no gap after it. Gates split the run, and each stretch is counted on its own, so no picket is cut at a gate post. Full method

Sources

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Limits

An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: a fence of any shape drawn from above and in elevation, with posts, rails, boards, pickets or panels, gates and concrete.

Every change on What’s new

How we make toolsReport a mistake

How the pickets are counted

Pickets stand side by side with a gap between them, so each one takes its own width plus a gap along the fence. Along a stretch of length L, with pickets w wide and gaps g, the count is (L + g) ÷ (w + g), rounded up: the extra g is because the last picket needs no gap after it. Gates split the run, and each stretch is counted on its own, so no picket is cut at a gate post.

A worked example: a corner front yard of 30 and 20 ft with a 3½ ft gate, 3½ in pickets with 3 in gaps, two rails, posts at most 8 ft apart. The gate leaves two stretches of 13 ft 3 in, and the 20 ft side is its own: 88 pickets, 9 posts and 14 rails.

Pick the gap to the look you want and, where it matters, to the rules: a pool barrier or a fence round small children usually limits openings, so check with your town before you settle on a wide gap. The drawing shows a stretch to scale, with the pickets’ pointed tops, so you can judge the spacing.

pickets per stretch = ⌈(length + gap) ÷ (width + gap)⌉

Pickets per foot

Divide 12 in by the picket width plus the gap: 3½ in pickets with 2½ in gaps are 6 in apart, so 2 a foot, about 100 per 50 ft before gates.

Pickets per 100 ft

One straight run, no gates.

One straight run, no gates.
PicketsPer 100 ftPer foot
3½ in picket, 1½ in gap2412.40
3½ in picket, 2½ in gap2012.00
3½ in picket, 3½ in gap1721.71
5½ in picket, 2 in gap1611.60
5½ in picket, 3 in gap1421.41
2½ in picket, 2½ in gap2412.40

Sources

Product names are trademarks of their owners; Binary Decimal is not affiliated with any of them. Their instructions and data sheets are cited for the figures printed in them.

Common questions

How many pickets do I need for a fence?

Divide each stretch’s length plus one gap by the picket width plus the gap, and round up. For 3½ in pickets with 2½ in gaps that is 2 a foot, about 200 per 100 ft.

How far apart should pickets be?

There is no single rule: it comes down to the look and to any limit on openings where you live. Narrow gaps look more solid; a gap close to the picket’s width looks classic. Try a few in the drawing.

How many rails does a picket fence need?

As many as your design calls for: low picket fences are often built with two per section, taller ones with three. Each rail spans one section between posts, so rails = sections × rails per section.

How tall is a picket fence?

Front yard picket fences are often 3 to 4 ft. Many towns limit front yard fence height, so check the zoning rule before you buy.