Fence Panel Calculator
Panels and posts for a fence of ready-made panels set between the posts…
Panels and posts for a fence of ready-made panels set between the posts, sides and gates included, with the last panel on each side cut to fit.
Gates
Height
Panel width
The width on the panel’s label. Posts go between panels, so they stand a panel and a post apart.
More options3½ in posts · 3 ft in the ground · prices
Posts
QUIKRETE’s rule buries a third of the post and adds 6 in of gravel. Where the ground freezes, go below the frost line your building department gives.
Concrete bags
Your prices (optional, each)
ExampleFence panels
14panels
100 ft of fence: 14 sections between 14 posts, 14 panels.
Enter yours to see your result.
| Posts | 14 × 10 ft | 4×4; 4 corner, 0 end, 0 gate, 10 line |
|---|---|---|
| Panels | 14 | the last on a side cut to fit |
| Concrete | 40 × 80 lb | 10½ in holes, +10% |
| Gravel | 4.2 cu ft | 6 in under each post |
Concrete per hole and bag sizes: post hole concrete calculator.
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department. Terms
My shopping list
Add each part of a job and print one list. It stays on this device.
How this works: 4 sources,
How this works
Method
Ready-made panels fit between posts, so the posts stand a panel’s width plus a post’s width apart, centre to centre. Each stretch of fence takes its length divided by that spacing, rounded up, in panels, with a post at each end of every panel; the last panel on a stretch is usually cut down to fit. Gates split their side into stretches, and corners share a post. Full method
Sources
- Setting Posts project sheet (QUIKRETE)
- QUIKRETE Concrete Mix (No. 1101) data sheet (QUIKRETE, revised October 2022)
- CIP 31, Ordering Ready Mixed Concrete (National Ready Mixed Concrete Association, 2023)
- Voluntary Product Standard PS 20-25, American Softwood Lumber Standard (dressed sizes, standard lengths) (National Institute of Standards and Technology, 2025)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Limits
An estimate of materials to buy, not engineering or code advice. Check sizes with your supplier and local building department.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: a fence of any shape drawn from above and in elevation, with posts, rails, boards, pickets or panels, gates and concrete.
How the panels are counted
Ready-made panels fit between posts, so the posts stand a panel’s width plus a post’s width apart, centre to centre. Each stretch of fence takes its length divided by that spacing, rounded up, in panels, with a post at each end of every panel; the last panel on a stretch is usually cut down to fit. Gates split their side into stretches, and corners share a post.
A worked example: one 45 ft side with a 3 ft gate, in 6 ft panels between 4×4 posts. The gate leaves two stretches of 21 ft; at 6 ft 3½ in centres each takes 4 panels, the last one trimmed: 8 panels and 10 posts.
Panel widths vary by maker and country: 8 ft panels are common in the US and 6 ft (1.83 m) panels in the UK. Use the width on the label, and if your posts are slotted or the panels fix to the face of the posts, the spacing changes; adjust the post width to match.
panels per stretch = ⌈length ÷ (panel + post)⌉; posts = panels + 1 per stretch, less shared corners
- Fence posts: a third of the post’s length in the ground, in a hole three times its width, on 6 in of gravel. Source: Setting Posts project sheet.
- Concrete yields: an 80 lb bag of QUIKRETE Concrete Mix makes 0.60 cu ft; a 60 lb bag 0.45. Source: QUIKRETE Concrete Mix (No. 1101) data sheet.
Panels and posts for a straight run
6 ft and 8 ft panels between 4×4 posts, no gates.
| Run | 6 ft panels | Posts (6 ft) | 8 ft panels | Posts (8 ft) |
|---|---|---|---|---|
| 50 ft | 8 | 9 | 7 | 8 |
| 75 ft | 12 | 13 | 10 | 11 |
| 100 ft | 16 | 17 | 13 | 14 |
| 150 ft | 24 | 25 | 19 | 20 |
| 200 ft | 32 | 33 | 25 | 26 |
Sources
Product names are trademarks of their owners; Binary Decimal is not affiliated with any of them. Their instructions and data sheets are cited for the figures printed in them.
Common questions
How many fence panels do I need?
Divide each stretch by the panel width plus the post width and round up. 100 ft of 8 ft panels between 4×4 posts takes 13 panels and 14 posts.
How many posts for fence panels?
One more than the panels on each straight stretch, less one for every corner shared with the next side. Gates add a stretch, so a post on each side.
Can I cut a fence panel to fit?
Usually yes: most wood panels can be cut down and the end re-framed. The calculator counts the short panel as a whole one to buy.
What size are fence panels?
In the US often 8 ft wide and 6 ft tall; in the UK 6 ft (1.83 m) wide in several heights. Check the label, since sizes vary by maker.