Skip to content

Capacitor Energy Calculator

How much energy and charge a capacitor holds at a voltage.

How much energy and charge a capacitor holds at a voltage. Energy grows with the square of the voltage, so twice the volts stores four times the joules.

F
V
Try

ExampleEnergy stored

1.25J

1 mF charged to 50 V stores 1.25 J and holds 50 mC of charge. At half the voltage it would store a quarter as much, 312.5 mJ.

Enter your own capacitor to see its energy.

25 V312.5 mJ50 V1.25 J

Energy rises with the square of the voltage: the grey point is half the voltage, a quarter of the energy.

Charge
50 mC
In watt hours
347.2 µWh
At twice the voltage
5 J
How this works: 6 sources,

How this works

Method

Charging a capacitor moves charge onto its plates against a growing voltage, so the work done, the energy stored, is half the capacitance times the voltage squared: U = ½CV². A 1,000 µF capacitor at 50 V stores ½ × 0.001 × 50² = 1.25 J. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: the RC time constant with its curve, plus charge time, energy, RC filter cutoff and capacitor code pages.

Every change on What’s new

How we make toolsReport a mistake

How much energy a capacitor stores

Charging a capacitor moves charge onto its plates against a growing voltage, so the work done, the energy stored, is half the capacitance times the voltage squared: U = ½CV². A 1,000 µF capacitor at 50 V stores ½ × 0.001 × 50² = 1.25 J.

The square matters. Halve the voltage and the energy falls to a quarter; double it and it goes up four times. That is why high-voltage capacitors in camera flashes and defibrillators hold so much energy in a small part, and why a capacitor rated for 2.7 V, however many farads, stores modest energy.

The charge is simpler: Q = CV, in coulombs. A capacitor stores energy far faster than a battery can take it, but far less of it: 1.25 J is about 0.35 mWh, a fraction of a phone battery.

U = ½ × C × V² · Q = C × V · C = 2U ÷ V²

Energy at common capacitances and voltages

U = ½CV², worked out by the calculator’s own code.

U = ½CV², worked out by the calculator’s own code.
Capacitance5 V12 V50 V400 V
1 µF12.5 µJ72 µJ1.25 mJ80 mJ
10 µF125 µJ720 µJ12.5 mJ800 mJ
47 µF587.5 µJ3.384 mJ58.75 mJ3.76 J
100 µF1.25 mJ7.2 mJ125 mJ8 J
470 µF5.875 mJ33.84 mJ587.5 mJ37.6 J
1 mF12.5 mJ72 mJ1.25 J80 J
2.2 mF27.5 mJ158.4 mJ2.75 J176 J
4.7 mF58.75 mJ338.4 mJ5.875 J376 J
10 mF125 mJ720 mJ12.5 J800 J
100 mF1.25 J7.2 J125 J8 kJ
Show all 11 rows
1 F12.5 J72 J1.25 kJ80 kJ

Common questions

Why is it half of C × V²?

The voltage across the capacitor rises from 0 to V as it charges, so on average each bit of charge was moved through half the final voltage: Q × V ÷ 2 = ½CV².

Can a capacitor replace a battery?

For short bursts, yes; that is what supercapacitors do in backup and regenerative braking. For energy, no: a capacitor holds far less per gram, and its voltage falls steadily as it discharges.

Is a charged capacitor dangerous after power is off?

Large or high-voltage ones can be. Power supplies, flashes and microwave ovens can keep lethal charges; they need to be discharged through a suitable resistor before anyone touches them.