Capacitor Code Calculator (104, 103, 473)
Small capacitors print their value as a code in picofarads…
Small capacitors print their value as a code in picofarads: 104 is 10 followed by four zeros, 100,000 pF, which is 100 nF. Type the code or a value.
Type 104, 473J or 4R7 to read a code; 100nF or 4.7µF to get its code.
Code 104
100nF
104 is 100,000 pF, which is 100 nF or 0.1 µF.
- In pF · nF · µF
- 100,000 pF · 100 nF · 0.1 µF
- 3-digit code
- 104
How this works: 6 sources,
How this works
Method
Small ceramic and film capacitors print a three-digit code in picofarads: two significant digits and the number of zeros. 104 is 10 followed by four zeros, 100,000 pF, which is 100 nF or 0.1 µF; 103 is 10 nF; 472 is 4.7 nF. A one- or two-digit number on its own is just picofarads, so 22 means 22 pF. Full method
Sources
- Capacitor: three- and four-character marking code (Wikipedia)
- IEC 60062:2016+AMD1:2019, Marking codes for resistors and capacitors (IEC, 2016)
- University Physics Volume 2, §10.5 RC Circuits (OpenStax (Ling, Sanny and Moebs), 2016)
- University Physics Volume 2, §8.3 Energy Stored in a Capacitor (OpenStax (Ling, Sanny and Moebs), 2016)
- University Physics Volume 2, §15.2 Simple AC Circuits (capacitive reactance) (OpenStax (Ling, Sanny and Moebs), 2016)
- University Physics Volume 2, §8.2 Capacitors in Series and in Parallel (OpenStax (Ling, Sanny and Moebs), 2016)
How it’s tested
3 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: the RC time constant with its curve, plus charge time, energy, RC filter cutoff and capacitor code pages.
How to read a capacitor code
Small ceramic and film capacitors print a three-digit code in picofarads: two significant digits and the number of zeros. 104 is 10 followed by four zeros, 100,000 pF, which is 100 nF or 0.1 µF; 103 is 10 nF; 472 is 4.7 nF. A one- or two-digit number on its own is just picofarads, so 22 means 22 pF.
A letter after the digits is the tolerance, from IEC 60062: J is ±5%, K ±10% and M ±20%. Small values use a letter in pF instead: C ±0.25 pF, D ±0.5 pF. R marks a decimal point below 10 pF, as in 4R7 for 4.7 pF.
Larger electrolytic capacitors print their value and voltage in full, such as 470µF 25V. Very small parts may carry a two-character code, or nothing at all; the reel label and datasheet are then the only record.
XYZ = XY × 10^Z pF · 1 nF = 1,000 pF · 1 µF = 1,000 nF
- The three-digit code gives the capacitance in pF as XY × 10^Z, with J, K and M for ±5%, ±10% and ±20%; 473K is 47 nF ±10%. Source: Capacitor: three- and four-character marking code.
- IEC 60062 sets the marking codes, including the tolerance letters, for resistors and capacitors. Source: IEC 60062:2016+AMD1:2019, Marking codes for resistors and capacitors.
Common capacitor codes
Each code in pF, nF and µF, read by the calculator’s own code.
| Code | pF | nF | µF |
|---|---|---|---|
| 100 | 10 | 0.01 | 0.00001 |
| 101 | 100 | 0.1 | 0.0001 |
| 221 | 220 | 0.22 | 0.00022 |
| 471 | 470 | 0.47 | 0.00047 |
| 102 | 1,000 | 1 | 0.001 |
| 222 | 2,200 | 2.2 | 0.0022 |
| 472 | 4,700 | 4.7 | 0.0047 |
| 103 | 10,000 | 10 | 0.01 |
| 223 | 22,000 | 22 | 0.022 |
| 473 | 47,000 | 47 | 0.047 |
Show all 14 rowsShow fewer
| 104 | 100,000 | 100 | 0.1 |
| 224 | 220,000 | 220 | 0.22 |
| 474 | 470,000 | 470 | 0.47 |
| 105 | 1,000,000 | 1,000 | 1 |
Common questions
What is a 104 capacitor?
100 nF (0.1 µF, 100,000 pF), the most common decoupling capacitor next to chips. The letter after it, if any, is the tolerance.
Is 100 on a capacitor 100 pF?
No, 10 pF: 10 followed by no zeros. 101 is 100 pF. As with resistors, the last digit counts zeros.
What does the voltage on a capacitor mean?
Its maximum working voltage. Use a capacitor rated comfortably above the highest voltage in the circuit; the code tells you nothing about it.