Gay-Lussac’s Law Calculator (P1/T1 = P2/T2)
Type three of the four values to get the fourth…
Type three of the four values to get the fourth: warm a gas in a rigid container and its absolute pressure rises in proportion to its absolute temperature.
Before
After
Volume and the amount of gas stay the same. Temperatures are turned into kelvin for the law. The gauge units read as a tire gauge does; one atmosphere is added for the law.
ExamplePressure after
36.8psi (gauge)
P1/T1 = P2/T2: absolute pressure ×1.102, temperature in K ×1.102.
Type your own values, or pick what to solve for.
- In kelvin
- 293.15 K → 323.15 K
- Absolute pressure
- 46.7 → 51.5 psi
- P2 in kPa (absolute)
- 355 kPa
How this works: 7 sources,
How this works
Method
In a rigid container, a fixed amount of gas has an absolute pressure proportional to its absolute temperature: P1/T1 = P2/T2. Both have to be absolute. Temperatures go into kelvin, and a gauge pressure needs one atmosphere added, since gauges read zero at atmospheric pressure. Full method
Sources
- Wikipedia, Gay-Lussac’s law
- Wikipedia, Pressure measurement: absolute, gauge and differential pressures
- US NHTSA, Tires: check your tire pressure when the tires are cold
- NIST CODATA, molar gas constant R
- BIPM, The International System of Units (SI Brochure), 9th edition (2019)
- OpenStax Chemistry 2e, 9.2 The Ideal Gas Law
- NIST Special Publication 811, Guide for the Use of the SI (conversion factors)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: PV = nRT for any value in metric and US units with gauge pressure, a piston drawing, and Boyle’s, Charles’s, Gay-Lussac’s and the combined gas law.
How to use Gay-Lussac’s law
In a rigid container, a fixed amount of gas has an absolute pressure proportional to its absolute temperature: P1/T1 = P2/T2. Both have to be absolute. Temperatures go into kelvin, and a gauge pressure needs one atmosphere added, since gauges read zero at atmospheric pressure.
A tire at 32 psi on the gauge at 20 °C is really at 32 + 14.7 = 46.7 psi absolute and 293.15 K. Driven hard on a hot day to 50 °C (323.15 K), it reaches 46.7 × 323.15 ÷ 293.15 = 51.5 psi absolute, which the gauge shows as 36.8 psi. Treating 32 psi as absolute would wrongly give 35.3 psi on the gauge.
This is also why aerosol cans warn against heat and why pressure cookers work: at constant volume, every kelvin added pushes the pressure up in proportion. The law assumes the container doesn’t stretch, which a tire does slightly, so real readings rise a little less.
P1 ÷ T1 = P2 ÷ T2 (absolute P, T in kelvin; V and n constant)
- The pressure–temperature law is named after Joseph Louis Gay-Lussac, who studied it around 1802; it is also called Amontons’s law, after Guillaume Amontons’s observations around 1700. Source: Wikipedia, Gay-Lussac’s law.
- Gauge pressure is pressure above the surrounding atmosphere; absolute pressure is gauge pressure plus atmospheric pressure. Source: Wikipedia, Pressure measurement: absolute, gauge and differential pressures.
- Tire pressure should be checked when the tires are cold, because driving warms them and raises the reading. Source: US NHTSA, Tires: check your tire pressure when the tires are cold.
A 32 psi tire at different temperatures
Gauge pressure of a tire set to 32 psi at 20 °C, as its air warms or cools at constant volume.
| °C | °F | Absolute (psi) | Gauge (psi) | Gauge (kPa) |
|---|---|---|---|---|
| −20 | −4.00 | 40.3 | 25.6 | 177 |
| −10 | 14.0 | 41.9 | 27.2 | 188 |
| 0 | 32.0 | 43.5 | 28.8 | 199 |
| 10 | 50.0 | 45.1 | 30.4 | 210 |
| 20 | 68.0 | 46.7 | 32.0 | 221 |
| 30 | 86.0 | 48.3 | 33.6 | 232 |
| 40 | 104 | 49.9 | 35.2 | 243 |
| 50 | 122 | 51.5 | 36.8 | 254 |
| 60 | 140 | 53.1 | 38.4 | 265 |
| 70 | 158 | 54.7 | 40.0 | 276 |
Common questions
What is the formula for Gay-Lussac’s law?
P1/T1 = P2/T2 at constant volume and amount, with absolute pressures and temperatures in kelvin. So P2 = P1 × T2 ÷ T1.
Do I use gauge or absolute pressure?
Absolute. Add the atmospheric pressure (14.7 psi, 101.3 kPa or 1 atm) to a gauge reading first, and subtract it again at the end if you want a gauge answer. The tool does both when you pick “psi (gauge)”.
How much does tire pressure change with temperature?
About 1 psi for every 10 °F (5.6 °C) for a car tire around 32 psi, from Gay-Lussac’s law; the table above shows it step by step. That is why tires read low on the first cold morning of autumn.