Skip to content

Boyle’s Law Calculator (P1V1 = P2V2)

Type three of the four values to get the fourth…

Type three of the four values to get the fourth: squeeze a gas at constant temperature and its pressure rises as its volume falls, so P1V1 = P2V2.

Before

After

Solving
2.00 L
Pressure in
Volume in

Temperature and the amount of gas stay the same. The gauge units read as a tire gauge does; one atmosphere is added for the law.

ExampleVolume after

2.00L

P1·V1 = P2·V2: pressure ×3, volume ×0.333.

Type your own values, or pick what to solve for.

Before: 1.00 atm, 6.00 L
After: 3.00 atm, 2.00 L
P2 in kPa
304 kPa
V2 in US gallons
0.528 gal
How this works: 5 sources,

How this works

Method

At a fixed temperature, a fixed amount of gas has pressure and volume in inverse proportion: halve the volume and the pressure doubles. The product P × V stays the same, so P1V1 = P2V2. Squeeze 6.00 L of gas at 1.00 atm until the pressure is 3.00 atm and the volume becomes 1.00 × 6.00 ÷ 3.00 = 2.00 L. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: PV = nRT for any value in metric and US units with gauge pressure, a piston drawing, and Boyle’s, Charles’s, Gay-Lussac’s and the combined gas law.

Every change on What’s new

How we make toolsReport a mistake

How to use Boyle’s law

At a fixed temperature, a fixed amount of gas has pressure and volume in inverse proportion: halve the volume and the pressure doubles. The product P × V stays the same, so P1V1 = P2V2. Squeeze 6.00 L of gas at 1.00 atm until the pressure is 3.00 atm and the volume becomes 1.00 × 6.00 ÷ 3.00 = 2.00 L.

Any pressure and volume units work as long as each is the same on both sides, because they cancel. The one thing to watch is gauge pressure: a tire or scuba gauge reads zero at atmospheric pressure, and the law needs absolute pressure, so add one atmosphere (14.7 psi) before using it. Pick “psi (gauge)” and the tool does it for you.

The temperature has to stay put. Compressing a gas quickly warms it, which is why a bicycle pump gets hot, so Boyle’s law describes slow changes, or the state after the gas has cooled back to where it started.

P1 × V1 = P2 × V2 (T and n constant)

One litre of air at sea level, squeezed and expanded

The volume of 1.000 L of gas at 1 atm (101.325 kPa) at other absolute pressures, temperature unchanged.

The volume of 1.000 L of gas at 1 atm (101.325 kPa) at other absolute pressures, temperature unchanged.
Pressure (atm)Pressure (kPa)Pressure (psi)Volume (L)
0.2525.333.6744.000
0.5050.667.3482.000
0.7575.9911.021.333
1.00101.314.701.000
1.50152.022.040.6667
2.00202.729.390.5000
3.00304.044.090.3333
4.00405.358.780.2500
5.00506.673.480.2000
10.01,013147.00.1000
Show all 12 rows
50.05,066734.80.02000
20020,2702,9390.005000

Common questions

What is the formula for Boyle’s law?

P1V1 = P2V2, or P × V = constant, for a fixed amount of gas at a fixed temperature. Rearranged, V2 = P1V1 ÷ P2 and P2 = P1V1 ÷ V2.

Does Boyle’s law need kelvin?

No, because temperature isn’t in the equation: it is held constant. Only Charles’s, Gay-Lussac’s and the combined law need temperatures in kelvin.

Why do my ears pop on a plane?

The air trapped in your middle ear follows Boyle’s law. As cabin pressure falls on the climb, that air expands until it pushes open the Eustachian tube; on the descent it shrinks, and swallowing lets air back in.