Charles’s Law Calculator (V1/T1 = V2/T2)
Type three of the four values to get the fourth…
Type three of the four values to get the fourth: heat a gas at constant pressure and its volume grows in proportion to its absolute temperature.
Before
After
Pressure and the amount of gas stay the same. Temperatures are turned into kelvin for the law.
ExampleVolume after
3.13L
V1/T1 = V2/T2: volume ×1.252, temperature in K ×1.252.
Type your own values, or pick what to solve for.
- In kelvin
- 298.15 K → 373.15 K
How this works: 5 sources,
How this works
Method
At a fixed pressure, a gas’s volume is proportional to its absolute temperature, so V1/T1 = V2/T2. The temperatures must be in kelvin. Heat 2.50 L of gas from 25.0 °C (298.15 K) to 100.0 °C (373.15 K) and it grows to 2.50 × 373.15 ÷ 298.15 = 3.13 L. Full method
Sources
- Wikipedia, Charles’s law
- OpenStax Chemistry 2e, 9.2 Relating Pressure, Volume, Amount, and Temperature: The Ideal Gas Law
- NIST CODATA, molar gas constant R
- BIPM, The International System of Units (SI Brochure), 9th edition (2019)
- NIST Special Publication 811, Guide for the Use of the SI (conversion factors)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: PV = nRT for any value in metric and US units with gauge pressure, a piston drawing, and Boyle’s, Charles’s, Gay-Lussac’s and the combined gas law.
How to use Charles’s law
At a fixed pressure, a gas’s volume is proportional to its absolute temperature, so V1/T1 = V2/T2. The temperatures must be in kelvin. Heat 2.50 L of gas from 25.0 °C (298.15 K) to 100.0 °C (373.15 K) and it grows to 2.50 × 373.15 ÷ 298.15 = 3.13 L.
Using Celsius directly is the classic mistake: it would say the volume quadruples from 25 °C to 100 °C, and that a gas at 0 °C has no volume at all. Kelvin starts from absolute zero, where the extrapolated volume of an ideal gas reaches zero, which is why the proportion only holds on that scale. The tool converts °C and °F for you and shows the kelvin values.
The same rule explains why a balloon shrinks in a cold car and why hot-air balloons fly: warmer air takes more room at the same pressure, so a given volume of it weighs less than the cooler air around it.
V1 ÷ T1 = V2 ÷ T2 (T in kelvin; P and n constant)
- Jacques Charles found the volume–temperature relationship around 1787 but didn’t publish it; Joseph Louis Gay-Lussac published it in 1802, crediting Charles. Source: Wikipedia, Charles’s law.
- Charles’s law follows from PV = nRT at constant P and n: V/T = nR/P, a constant. Source: OpenStax Chemistry 2e, 9.2 Relating Pressure, Volume, Amount, and Temperature: The Ideal Gas Law.
One litre of gas at 0 °C, warmed and cooled
The volume of 1.000 L of gas at 0 °C (273.15 K) at other temperatures, pressure unchanged.
| °C | °F | K | Volume (L) |
|---|---|---|---|
| −196 | −320.8 | 77.15 | 0.2824 |
| −78.5 | −109.3 | 194.65 | 0.7126 |
| −40 | −40.0 | 233.15 | 0.8536 |
| −20 | −4.0 | 253.15 | 0.9268 |
| 0 | 32.0 | 273.15 | 1.000 |
| 20 | 68.0 | 293.15 | 1.073 |
| 37 | 98.6 | 310.15 | 1.135 |
| 100 | 212.0 | 373.15 | 1.366 |
| 200 | 392.0 | 473.15 | 1.732 |
| 500 | 932.0 | 773.15 | 2.830 |
Show all 11 rowsShow fewer
| 1000 | 1,832.0 | 1,273.15 | 4.661 |
Common questions
Why must Charles’s law use kelvin?
Because the volume is proportional to temperature measured from absolute zero. Celsius and Fahrenheit have arbitrary zeros, so their ratios mean nothing: 20 °C is not twice as hot as 10 °C, but 293 K is 1.035 times 283 K.
What is the formula for Charles’s law?
V1/T1 = V2/T2 at constant pressure, with T in kelvin. So V2 = V1 × T2 ÷ T1 and T2 = T1 × V2 ÷ V1.
Does a real gas shrink to nothing at absolute zero?
No. Real gases condense to liquids or solids long before that. Absolute zero is where the ideal gas line would reach zero volume if you extended it, which is how it was first estimated.