Skip to content

Combined Gas Law Calculator (P1V1/T1 = P2V2/T2)

Type five of the six values to get the sixth: when pressure…

Type five of the six values to get the sixth: when pressure, volume and temperature all change, P·V/T stays the same for a fixed amount of gas.

Before

After

Solving
2.50 L
Pressure in
Volume in
Temperature in

The amount of gas stays the same. Temperatures are turned into kelvin for the law. The gauge units read as a tire gauge does; one atmosphere is added for the law.

ExampleVolume after

2.50L

P1·V1/T1 = P2·V2/T2: pressure ×2.5, volume ×0.501, temperature in K ×1.252.

Type your own values, or pick what to solve for.

Before: 1.00 atm, 5.00 L, 25.0 °C
After: 2.50 atm, 2.50 L, 100 °C
In kelvin
298.15 K → 373.15 K
P2 in kPa
253 kPa
How this works: 5 sources,

How this works

Method

When pressure, volume and temperature all change for a fixed amount of gas, P·V/T stays the same: P1V1/T1 = P2V2/T2. It contains the other three laws: hold T and it is Boyle’s, hold P and it is Charles’s, hold V and it is Gay-Lussac’s. Temperatures must be in kelvin and pressures absolute. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: PV = nRT for any value in metric and US units with gauge pressure, a piston drawing, and Boyle’s, Charles’s, Gay-Lussac’s and the combined gas law.

Every change on What’s new

How we make toolsReport a mistake

How to use the combined gas law

When pressure, volume and temperature all change for a fixed amount of gas, P·V/T stays the same: P1V1/T1 = P2V2/T2. It contains the other three laws: hold T and it is Boyle’s, hold P and it is Charles’s, hold V and it is Gay-Lussac’s. Temperatures must be in kelvin and pressures absolute.

Taking 5.00 L of gas at 1.00 atm and 25.0 °C to 2.50 atm and 100.0 °C: V2 = P1V1T2 ÷ (T1P2) = 1.00 × 5.00 × 373.15 ÷ (298.15 × 2.50) = 2.50 L. The higher pressure shrinks it by 2.5 times and the heat grows it by 1.25 times, so it ends at half its volume.

A common use is correcting a gas volume to standard conditions. IUPAC’s standard temperature and pressure are 0 °C and 100 kPa (1 bar), where a mole of ideal gas fills 22.711 L; the older convention of 1 atm gives 22.414 L, the figure many textbooks still use. Say which one you mean.

P1 × V1 ÷ T1 = P2 × V2 ÷ T2 (absolute P, T in kelvin; n constant)

Molar volume of an ideal gas

The volume one mole of ideal gas fills at common reference conditions, from PV = nRT with the exact R. Real gases differ slightly, and more at high pressures such as 200 bar.

The volume one mole of ideal gas fills at common reference conditions, from PV = nRT with the exact R. Real gases differ slightly, and more at high pressures such as 200 bar.
ConditionsTemperaturePressureLitres per mole
IUPAC STP0 °C100 kPa22.71
Old STP0 °C1 atm22.41
Room temperature (SATP)25 °C100 kPa24.79
Room temperature, 1 atm25 °C1 atm24.47
NTP (US engineering)20 °C1 atm24.06
Body temperature37 °C1 atm25.45
Boiling water100 °C1 atm30.62
Denver air pressure (approx.)20 °C83 kPa29.37
Freezer−18 °C1 atm20.94
Scuba tank fill20 °C200 bar0.1219

Common questions

What is the combined gas law formula?

P1V1/T1 = P2V2/T2, for a fixed amount of gas, with absolute pressures and temperatures in kelvin. Solve for the one unknown by cross-multiplying, for example V2 = P1V1T2 ÷ (T1P2).

How is it different from the ideal gas law?

The combined law compares two states of the same gas and doesn’t need the amount or R. The ideal gas law PV = nRT describes one state and links it to the number of moles.

Which units should I use?

Any pressure and volume units, as long as each is the same on both sides, plus kelvin for temperature. The tool converts °C, °F, psi, mmHg and gallons for you.