Skip to content

Moles to Grams Calculator

Type a formula and an amount in moles to get the mass to weigh out…

Type a formula and an amount in moles to get the mass to weigh out, multiplied out from the molar mass, with the particles it holds and every step shown.

Read as NaCl

3 significant figures

Example0.250 mol of NaCl

14.6g

0.250 mol × 58.44 g/mol = 14.6 g to weigh out.

Type your own formula and amount.

Mass
14.6 g
÷ 58.44
Amount
0.250 mol
× Nₐ
Particles
1.51 × 10²³
Grams to moles divides by the molar mass; moles to particles multiplies by the Avogadro constant, Nₐ = 6.02214076 × 10²³ per mole (exact).
In milligrams
14,600 mg
Particles
1.51 × 10²³
Molar mass
58.44 g/mol
How this works: 4 sources,

How this works

Method

Multiply the amount in moles by the molar mass. Sodium chloride is 22.990 + 35.45 = 58.44 g/mol, so a quarter of a mole, 0.250 mol, weighs 0.250 × 58.44 = 14.6 g. This is the sum you do before every weighing in a lab: the recipe gives moles, the balance reads grams. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: molar mass with each element’s share of the mass and atoms, grams to moles and back, percent composition, empirical formula, limiting reagent, theoretical and percent yield.

Every change on What’s new

How we make toolsReport a mistake

How to convert moles to grams

Multiply the amount in moles by the molar mass. Sodium chloride is 22.990 + 35.45 = 58.44 g/mol, so a quarter of a mole, 0.250 mol, weighs 0.250 × 58.44 = 14.6 g. This is the sum you do before every weighing in a lab: the recipe gives moles, the balance reads grams.

Watch for hydrates. Copper(II) sulfate is usually sold as the blue pentahydrate, CuSO4·5H2O, whose five water molecules are part of the solid’s mass. A tenth of a mole of the hydrate weighs 25.0 g, but a tenth of a mole of the anhydrous salt only 16.0 g. Weigh the form you actually have, and include the dot and the water in the formula.

For millimoles, the same multiplication gives milligrams, because the factor of a thousand cancels: 2.5 mmol of glucose is 2.5 × 180.156 = 450 mg. And from a number of particles, divide by the Avogadro constant first to get moles.

m (g) = n (mol) × M (g/mol)

Grams to weigh out for common lab reagents

The mass of one tenth of a mole and of one mole, hydrates included as sold.

The mass of one tenth of a mole and of one mole, hydrates included as sold.
ReagentFormulaMolar mass (g/mol)0.1 mol (g)1 mol (g)
Copper(II) sulfate pentahydrateCuSO₄·5H₂O249.67724.968249.677
Copper(II) sulfate, anhydrousCuSO₄159.60215.960159.602
Sodium hydroxideNaOH39.9974.00039.997
Potassium permanganateKMnO₄158.03215.803158.032
Sodium carbonate decahydrateNa₂CO₃·10H₂O286.13828.614286.138
Magnesium sulfate heptahydrate (Epsom salt)MgSO₄·7H₂O246.46624.647246.466
Silver nitrateAgNO₃169.87216.987169.872
Potassium dichromateK₂Cr₂O₇294.18229.418294.182
Calcium chloride dihydrateCaCl₂·2H₂O147.00814.701147.008
Oxalic acid dihydrateH₂C₂O₄·2H₂O126.06412.606126.064
Show all 11 rows
EDTA disodium salt dihydrateC₁₀H₁₄N₂Na₂O₈·2H₂O372.23837.224372.238

Common questions

What is the formula for moles to grams?

Grams = moles × molar mass. For 0.500 mol of glucose (180.156 g/mol): 0.500 × 180.156 = 90.1 g.

Do I include the water in a hydrate?

Yes, if the solid you weigh is the hydrate. Its water molecules are part of every gram. Write the formula with a dot, CuSO4·5H2O, and the molar mass includes them.

How do I get grams from a number of molecules?

Divide by 6.022 × 10²³ to get moles, then multiply by the molar mass. 3.0 × 10²³ molecules of CO2 is 0.498 mol, or 21.9 g.

Why is my answer different from the book’s?

Usually because of rounded atomic weights (chlorine as 35.5 instead of 35.45) or a missing hydrate. The working shows every weight used, so you can compare line by line.