Limiting Reagent Calculator
Type a reaction and how much of each reactant you have.
Type a reaction and how much of each reactant you have. The equation is balanced for you, and you see which reactant runs out first, what is left over and how much product forms.
Balanced as 2Al+3Cl2→2AlCl3
What you start with
Leave a box empty for a reactant in excess.
ExampleLimiting reagent
Cl2
Cl₂ runs out first: 1.06 mol ÷ 3 = 0.353, the smallest of the reactants’ moles per coefficient.
Type your own reaction and amounts.
2Al+3Cl2→2AlCl3
- Al19.0 g used
- Cl275.0 g used · runs out
- AlCl394.0 g made
Solid: used or made. Faint: left over.
- Al left over
- 5.97 g
- AlCl₃ made
- 94.0 g
- AlCl₃ in moles
- 0.705 mol
How this works: 4 sources,
How this works
Method
Reactants are used up in the ratio of their coefficients, not in equal grams. Convert each reactant’s mass to moles, then divide by its coefficient in the balanced equation. The reactant with the smallest result runs out first: it is the limiting reagent, and it alone decides how much product forms. Full method
Sources
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: molar mass with each element’s share of the mass and atoms, grams to moles and back, percent composition, empirical formula, limiting reagent, theoretical and percent yield.
How to find the limiting reagent
Reactants are used up in the ratio of their coefficients, not in equal grams. Convert each reactant’s mass to moles, then divide by its coefficient in the balanced equation. The reactant with the smallest result runs out first: it is the limiting reagent, and it alone decides how much product forms.
For aluminium and chlorine, 2Al + 3Cl2 → 2AlCl3: 25.0 g of aluminium is 25.0 ÷ 26.982 = 0.927 mol, and ÷ 2 gives 0.463. 75.0 g of chlorine is 75.0 ÷ 70.90 = 1.058 mol, and ÷ 3 gives 0.353. Chlorine’s number is smaller, so chlorine runs out, even though there is three times as much of it by mass.
Everything else follows from that smallest number. Multiply it by each coefficient to get the moles used or made: 0.353 × 2 = 0.705 mol of AlCl3, which is 94.0 g, and 0.705 mol of aluminium used, leaving 6.0 g of aluminium unreacted. The bars on the tool show each reactant’s used and leftover share.
limiting reagent = smallest (moles ÷ coefficient)
- The limiting reactant is the one that is completely consumed; the theoretical yield is calculated from it, and the other reactants are in excess. Source: OpenStax Chemistry 2e, 4.4 Reaction Yields.
Equal masses, unequal amounts: 10.0 g of each reactant
Mix 10.0 g of every reactant and see which runs out first, with the product the limiting reagent allows. Each equation is balanced by the tool.
| Reaction | Balanced equation | Limiting reagent | First product (g) |
|---|---|---|---|
| Hydrogen burning | 2H₂ + O₂ → 2H₂O | O₂ | 11.3 |
| Ammonia synthesis | N₂ + 3H₂ → 2NH₃ | N₂ | 12.2 |
| Rusting iron | 4Fe + 3O₂ → 2Fe₂O₃ | Fe | 14.3 |
| Aluminium and chlorine | 2Al + 3Cl₂ → 2AlCl₃ | Cl₂ | 12.5 |
| Thermite | Fe₂O₃ + 2Al → Al₂O₃ + 2Fe | Fe₂O₃ | 6.38 |
| Zinc and hydrochloric acid | Zn + 2HCl → ZnCl₂ + H₂ | HCl | 18.7 |
| Methane burning | CH₄ + 2O₂ → CO₂ + 2H₂O | O₂ | 6.88 |
| Silver chloride precipitation | AgNO₃ + NaCl → AgCl + NaNO₃ | AgNO₃ | 8.44 |
| Making water gas | C + H₂O → CO + H₂ | H₂O | 15.5 |
| Magnesium in oxygen | 2Mg + O₂ → 2MgO | Mg | 16.6 |
Common questions
Is the limiting reagent the one with the smallest mass?
Not necessarily. What matters is moles divided by the coefficient. In 2H2 + O2 → 2H2O, 10 g of hydrogen is far more moles than 10 g of oxygen, so oxygen runs out first.
What if two reactants give the same number?
Then they run out together and neither is in excess: the amounts were in exactly the right ratio, which chemists call stoichiometric amounts. The tool marks both.
How much of the excess reactant is left?
Multiply the limiting number by the excess reactant’s coefficient to get the moles used, convert to grams and subtract from what you started with. The tool shows it for every excess reactant.
Do I need a balanced equation?
Yes, the coefficients are the whole point. Type the unbalanced equation here and it is balanced for you before anything else is worked out.