Time to Decimal Calculator
Payroll forms want hours as a decimal: 7 hours 45 minutes is 7.75.
Payroll forms want hours as a decimal: 7 hours 45 minutes is 7.75. Type a time to get its decimal, or switch the direction to turn 7.75 back into hours and minutes.
Convert
7:45, 7h 45m or 465 min
Decimal hours
7.75hours
7 h 45 min is 7 + 45 ÷ 60 = 7.75 hours.
- To tenths
- 7.8
- In minutes
- 465
- Hours and minutes
- 7:45
How this works: 7 sources,
How this works
Method
An hour has 60 minutes, so each minute is 1/60 of an hour. Decimal hours are the whole hours plus the minutes divided by 60: 7 h 45 min is 7 + 45 ÷ 60 = 7.75. Most minute counts don’t divide evenly (20 minutes is 0.3333…), so the answer is rounded to two places, the form payroll and invoices use, and to tenths for systems that record tenths. Full method
Sources
- 29 CFR 785.48, use of time clocks (rounding) (Cornell Law School, Legal Information Institute)
- Fact Sheet #23: Overtime Pay Requirements of the FLSA (U.S. Department of Labor, Wage and Hour Division)
- 29 U.S.C. 207, maximum hours (Fair Labor Standards Act, section 7) (Cornell Law School, Legal Information Institute)
- 29 CFR 778.104, each workweek stands alone (Cornell Law School, Legal Information Institute)
- California Labor Code section 510, overtime (California Legislative Information)
- DLSE opinion letter 2000.01.19 (daily overtime hours and the weekly 40) (California Division of Labor Standards Enforcement, 2000)
- Enforcement Policies and Interpretations Manual, section 48 (workday, workweek, seventh day) (California Division of Labor Standards Enforcement)
How it’s tested
One worked example for this page is checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: weekly and two-week time cards with draggable day bars, federal and California overtime, pay, CSV and saved weeks, plus eight time pages.
6 hours 38 minutes on a timesheet, worked out
Divide the minutes by 60: 38 ÷ 60 = 0.6333…, so 6 h 38 min is 6.63 hours to two places. At $24.50 an hour that pays 6.6333 × 24.50 = $162.52. Rounded to a tenth, as some payroll systems do, it is 6.6 hours. Going back, 6.63 hours is 6 hours and 0.63 × 60 = 37.8, so about 38 minutes.
How time becomes decimal hours
An hour has 60 minutes, so each minute is 1/60 of an hour. Decimal hours are the whole hours plus the minutes divided by 60: 7 h 45 min is 7 + 45 ÷ 60 = 7.75. Most minute counts don’t divide evenly (20 minutes is 0.3333…), so the answer is rounded to two places, the form payroll and invoices use, and to tenths for systems that record tenths.
The other way, take the decimal part and multiply by 60: 7.75 hours is 7 hours and 0.75 × 60 = 45 minutes. When the decimal was itself rounded, the minutes come out close to a whole number and are rounded to the nearest minute.
To pay for a time, multiply the decimal hours by the hourly rate, using the unrounded minutes where you can so the cents come out right.
decimal hours = hours + minutes ÷ 60; minutes = (decimal − whole hours) × 60
- Rounding to the nearest tenth of an hour (6 minutes) is one of the rounding steps federal rules accept, provided it averages out. Source: Cornell Law School, Legal Information Institute, 29 CFR 785.48, use of time clocks (rounding).
- Overtime is figured on hours over 40 in the workweek, so a timesheet in decimal hours makes the 40-hour line easy to see. Source: U.S. Department of Labor, Wage and Hour Division, Fact Sheet #23: Overtime Pay Requirements of the FLSA.
Minutes to decimal hours
Every minute of the hour as a decimal, computed by the calculator (rounded to two and to four places).
| Minutes | Decimal (2 places) | Decimal (4 places) |
|---|---|---|
| 1 | 0.02 | 0.0167 |
| 2 | 0.03 | 0.0333 |
| 3 | 0.05 | 0.0500 |
| 4 | 0.07 | 0.0667 |
| 5 | 0.08 | 0.0833 |
| 6 | 0.10 | 0.1000 |
| 7 | 0.12 | 0.1167 |
| 8 | 0.13 | 0.1333 |
| 9 | 0.15 | 0.1500 |
| 10 | 0.17 | 0.1667 |
Show all 60 rowsShow fewer
| 11 | 0.18 | 0.1833 |
| 12 | 0.20 | 0.2000 |
| 13 | 0.22 | 0.2167 |
| 14 | 0.23 | 0.2333 |
| 15 | 0.25 | 0.2500 |
| 16 | 0.27 | 0.2667 |
| 17 | 0.28 | 0.2833 |
| 18 | 0.30 | 0.3000 |
| 19 | 0.32 | 0.3167 |
| 20 | 0.33 | 0.3333 |
| 21 | 0.35 | 0.3500 |
| 22 | 0.37 | 0.3667 |
| 23 | 0.38 | 0.3833 |
| 24 | 0.40 | 0.4000 |
| 25 | 0.42 | 0.4167 |
| 26 | 0.43 | 0.4333 |
| 27 | 0.45 | 0.4500 |
| 28 | 0.47 | 0.4667 |
| 29 | 0.48 | 0.4833 |
| 30 | 0.50 | 0.5000 |
| 31 | 0.52 | 0.5167 |
| 32 | 0.53 | 0.5333 |
| 33 | 0.55 | 0.5500 |
| 34 | 0.57 | 0.5667 |
| 35 | 0.58 | 0.5833 |
| 36 | 0.60 | 0.6000 |
| 37 | 0.62 | 0.6167 |
| 38 | 0.63 | 0.6333 |
| 39 | 0.65 | 0.6500 |
| 40 | 0.67 | 0.6667 |
| 41 | 0.68 | 0.6833 |
| 42 | 0.70 | 0.7000 |
| 43 | 0.72 | 0.7167 |
| 44 | 0.73 | 0.7333 |
| 45 | 0.75 | 0.7500 |
| 46 | 0.77 | 0.7667 |
| 47 | 0.78 | 0.7833 |
| 48 | 0.80 | 0.8000 |
| 49 | 0.82 | 0.8167 |
| 50 | 0.83 | 0.8333 |
| 51 | 0.85 | 0.8500 |
| 52 | 0.87 | 0.8667 |
| 53 | 0.88 | 0.8833 |
| 54 | 0.90 | 0.9000 |
| 55 | 0.92 | 0.9167 |
| 56 | 0.93 | 0.9333 |
| 57 | 0.95 | 0.9500 |
| 58 | 0.97 | 0.9667 |
| 59 | 0.98 | 0.9833 |
| 60 | 1.00 | 1.0000 |
Sources
Common questions
What is 15 minutes in decimal?
0.25 hours. 30 minutes is 0.50, 45 minutes is 0.75 and 20 minutes is 0.33. The chart lists every minute.
Why is 8.30 not 8 hours 30 minutes?
Because .30 is thirty hundredths of an hour, which is 18 minutes. 8 hours 30 minutes is 8.50. Mixing the two up is the most common timesheet mistake.
Should I round to two places or to tenths?
Use what your payroll asks for. Two places is the usual default. Tenths (6-minute steps) and quarters (15-minute steps) are common time clock settings; whichever is used, it should even out over time.