Hours and Minutes Calculator
Add up lengths of time, or take some away, without carrying the sixties by hand.
Add up lengths of time, or take some away, without carrying the sixties by hand. Write them as 2:45, 2h 45m or 165 min; the total comes in hours and minutes and in decimal hours.
2:45, 2h 45m or 165 min. The + or − beside a row switches it between adding and taking away.
Total
7:45h:mm
7 h 45 min from 4 entries, 0:20 of it taken away.
Each block is one time you added; the striped end is what was taken away.
The working, on paper
Minutes: 45 + 30 + 50 − 20 = 105 min
Hours: 2 + 1 + 3 = 6 h
105 min = 1 h 45 min, so 6 h + 1 h 45 min = 7:45
- Decimal hours
- 7.75
- In minutes
- 465
- Taken away
- 0:20
How this works: 8 sources,
How this works
Method
Each row is read as a length of time: 2:45, 2h 45m, 165 min or 2.75 h all mean the same. A row marked minus is taken away. Internally every row is whole minutes, so the total is exact; then it is split back into hours and minutes by dividing by 60. Full method
Sources
- Sexagesimal (base 60, why an hour has 60 minutes) (Wikipedia)
- 29 CFR 785.48, use of time clocks (rounding) (Cornell Law School, Legal Information Institute)
- 29 U.S.C. 207, maximum hours (Fair Labor Standards Act, section 7) (Cornell Law School, Legal Information Institute)
- Fact Sheet #23: Overtime Pay Requirements of the FLSA (U.S. Department of Labor, Wage and Hour Division)
- 29 CFR 778.104, each workweek stands alone (Cornell Law School, Legal Information Institute)
- California Labor Code section 510, overtime (California Legislative Information)
- DLSE opinion letter 2000.01.19 (daily overtime hours and the weekly 40) (California Division of Labor Standards Enforcement, 2000)
- Enforcement Policies and Interpretations Manual, section 48 (workday, workweek, seventh day) (California Division of Labor Standards Enforcement)
How it’s tested
One worked example for this page is checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: weekly and two-week time cards with draggable day bars, federal and California overtime, pay, CSV and saved weeks, plus eight time pages.
A week of overtime slips, added up
Say your overtime slips read 1:40, 2:35, 0:55 and 3:20. Add the minutes: 40 + 35 + 55 + 20 = 150 minutes, which is 2 hours 30 minutes. Add the hours: 1 + 2 + 0 + 3 = 6. Carry the 2 hours across and the total is 8 hours 30 minutes, or 8.50 decimal hours. Typing them as 1.40 + 2.35 + 0.55 + 3.20 on a normal calculator gives 7.50, an hour short, because it carries at 100, not 60.
How hours and minutes are added
Each row is read as a length of time: 2:45, 2h 45m, 165 min or 2.75 h all mean the same. A row marked minus is taken away. Internally every row is whole minutes, so the total is exact; then it is split back into hours and minutes by dividing by 60.
The card shows the paper method too: add the minutes column, add the hours column, then turn every 60 minutes into an hour and carry it. That is the step a normal calculator gets wrong, because it treats 1:45 as 1.45, a decimal.
The total is also given in decimal hours, rounded to two places, and in minutes, for a timesheet that wants either.
total = Σ (hours × 60 + minutes) → h = floor(total ÷ 60), min = total mod 60
- Hours divide into 60 minutes because time keeping kept the Babylonian base-60 system, which is why sums of time carry at 60. Source: Wikipedia, Sexagesimal (base 60, why an hour has 60 minutes).
- Federal rules let employers record time to the nearest 5 minutes, tenth or quarter of an hour, so totals often come in quarter hours. Source: Cornell Law School, Legal Information Institute, 29 CFR 785.48, use of time clocks (rounding).
Minutes in hours and minutes
Common totals of minutes, split into hours and minutes and decimal hours by the calculator.
| Minutes | Hours and minutes | h:mm | Decimal hours |
|---|---|---|---|
| 75 | 1 h 15 min | 1:15 | 1.25 |
| 90 | 1 h 30 min | 1:30 | 1.50 |
| 100 | 1 h 40 min | 1:40 | 1.67 |
| 105 | 1 h 45 min | 1:45 | 1.75 |
| 125 | 2 h 5 min | 2:05 | 2.08 |
| 135 | 2 h 15 min | 2:15 | 2.25 |
| 150 | 2 h 30 min | 2:30 | 2.50 |
| 165 | 2 h 45 min | 2:45 | 2.75 |
| 195 | 3 h 15 min | 3:15 | 3.25 |
| 200 | 3 h 20 min | 3:20 | 3.33 |
Show all 16 rowsShow fewer
| 225 | 3 h 45 min | 3:45 | 3.75 |
| 270 | 4 h 30 min | 4:30 | 4.50 |
| 300 | 5 h | 5:00 | 5.00 |
| 450 | 7 h 30 min | 7:30 | 7.50 |
| 480 | 8 h | 8:00 | 8.00 |
| 525 | 8 h 45 min | 8:45 | 8.75 |
Sources
Common questions
Why does my calculator give the wrong total for times?
Because it carries at 100. 1:45 + 1:30 typed as 1.45 + 1.30 gives 2.75, but the real total is 3 hours 15 minutes. Either add hours and minutes separately and carry every 60 minutes, or convert to decimal hours first (1.75 + 1.5 = 3.25).
Can I subtract a time?
Yes. Tap the + beside a row to turn it into −, or type a minus sign. The total can go below zero, which shows how much time is missing.
What formats can I type?
2:45, 2h 45m, 2 hours 45 minutes, 165 min, 165 (a bare number is minutes) and 2.75h all work. Seconds can be added as 0:02:30.