Skip to content

Haber Process Equation: N2 + 3H2 ⇌ 2NH3

The Haber process makes ammonia from nitrogen and hydrogen…

The Haber process makes ammonia from nitrogen and hydrogen: one N2 and three H2 give two NH3. Here it is balanced, with the masses that go in and come out.

Read as N2+H2⇌NH3

Try
Redox in solutionAs written

Solution

Adds H₂O and H⁺ (acidic) or H₂O and OH⁻ (basic) where the balance needs them.

ExampleBalanced

N2+3H2⇌2NH3

6 electrons transferred. Every element balances.

Type your own equation to balance it.

ReactantsEvery element balancesProducts
Atoms of each element on each side of the equation
ElementReactantsProductsBalanced
N
2
2
H
6
6
Reaction type
Synthesis (combination)
Redox
Hydrogen oxidised, nitrogen reduced
How this works: 7 sources,

How this works

Method

Nitrogen and hydrogen combine into ammonia, NH3. Each ammonia molecule has one nitrogen atom, and N2 brings two, so two NH3 form from one N2. Those two ammonia molecules hold six hydrogen atoms, which three H2 supply. The balanced equation is N2 + 3H2 ⇌ 2NH3: two nitrogen and six hydrogen atoms on each side. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: exact balancing with an atom ledger, ions, hydrates and redox in acidic or basic solution, worked steps, a practice mode, and combustion, redox and famous-equation pages.

Every change on What’s new

How we make toolsReport a mistake

How the Haber process equation balances

Nitrogen and hydrogen combine into ammonia, NH3. Each ammonia molecule has one nitrogen atom, and N2 brings two, so two NH3 form from one N2. Those two ammonia molecules hold six hydrogen atoms, which three H2 supply. The balanced equation is N2 + 3H2 ⇌ 2NH3: two nitrogen and six hydrogen atoms on each side.

By mass, one tonne of ammonia takes 822 kg of nitrogen and 178 kg of hydrogen, which add up to the full tonne because no atoms are lost. Nitrogen comes free from the air; the hydrogen is the costly part, mostly made from natural gas, which is where most of the process’s carbon dioxide comes from.

The double arrow matters. The reaction is reversible and gives off heat (about 92 kJ for every two moles of ammonia), so by Le Chatelier’s principle low temperature and high pressure push it toward ammonia. Low temperature also makes it slow, so plants compromise at around 400 to 450 °C and 150 to 300 bar with an iron catalyst, and recycle the unreacted gas.

N2(g) + 3H2(g) ⇌ 2NH3(g) ΔH ≈ −92 kJ

From ammonia to fertiliser: the equations

Ammonia and the main reactions that turn it into nitric acid and fertilisers, each balanced by the tool.

Ammonia and the main reactions that turn it into nitric acid and fertilisers, each balanced by the tool.
StepBalanced equation
Haber processN₂ + 3H₂ → 2NH₃
Steam reforming (hydrogen from methane)CH₄ + H₂O → CO + 3H₂
Water-gas shiftCO + H₂O → CO₂ + H₂
Ostwald process, step 14NH₃ + 5O₂ → 4NO + 6H₂O
Ostwald process, step 22NO + O₂ → 2NO₂
Ostwald process, step 33NO₂ + H₂O → 2HNO₃ + NO
Ammonium nitrateNH₃ + HNO₃ → NH₄NO₃
Urea2NH₃ + CO₂ → CO(NH₂)₂ + H₂O
Ammonium sulfate2NH₃ + H₂SO₄ → (NH₄)₂SO₄

Common questions

Why is the Haber process reversible?

Ammonia can break back down into nitrogen and hydrogen, and at the temperatures used it does so noticeably. At equilibrium only part of the gas is ammonia, so plants cool the mixture to condense the ammonia out and send the rest round again.

Why does the Haber process use high pressure?

Four molecules of gas (one N2 and three H2) become two of ammonia. Squeezing the gas favours the side with fewer molecules, so higher pressure raises the share of ammonia at equilibrium.

What is the catalyst?

Iron, prepared with small amounts of promoters such as potassium and aluminium oxides. A catalyst speeds up how fast equilibrium is reached; it doesn’t change where the equilibrium lies or the balanced equation.

Is it the Haber or the Haber–Bosch process?

Both names are used. Fritz Haber showed the reaction worked at high pressure in 1909; Carl Bosch scaled it up for industry at BASF, which is why the plant process is usually called Haber–Bosch.