Skip to content

Normal Distribution Calculator

Type a mean and standard deviation, pick below, above, between or outside…

Type a mean and standard deviation, pick below, above, between or outside, and drag the cut-offs to see the probability as a shaded area.

Probability

Need the mean and SD of your data first? The standard deviation calculator works them out from a list.

ExampleProbability

7.66%

P(X > 180) = 0.0766, about 1 in 13.

Type your own numbers, or drag the cut-off.

Drag the cut-off along the axis; the shaded area is the probability.

z-score
1.4286
As a decimal
0.0766
The rest
92.34%
How this works: 9 sources,

How this works

Method

A normal distribution is the symmetric bell curve set by two numbers, its mean μ and standard deviation σ. The probability of a value falling in a range is the area under the curve over that range, and the whole area is 1. Heights, measurement errors and many test scores are close to normal. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: live curves with draggable cut-offs, and tests on pasted data (t-tests, ANOVA, chi-square, Fisher’s exact, correlation, regression, A/B), checked against SciPy.

Every change on What’s new

How we make toolsReport a mistake

How to find probabilities under a normal curve

A normal distribution is the symmetric bell curve set by two numbers, its mean μ and standard deviation σ. The probability of a value falling in a range is the area under the curve over that range, and the whole area is 1. Heights, measurement errors and many test scores are close to normal.

To find an area, standardise each cut-off with z = (x − μ) ÷ σ and read Φ(z), the area to the left of z under the standard normal curve. If adult heights average 170 cm with an SD of 7 cm, the share taller than 180 cm is 1 − Φ(10/7) = 1 − Φ(1.43) ≈ 7.7%. The share between two values is Φ(z₂) − Φ(z₁), and outside them is what is left over.

The 68–95–99.7 rule is a quick check: about 68% of values lie within one standard deviation of the mean, 95% within two and 99.7% within three. So a value more than three standard deviations out happens about 3 times in 1,000, and the calculator gives the exact figure for any cut-off.

P(a < X < b) = Φ((b − μ)/σ) − Φ((a − μ)/σ)

Share of a normal distribution within k standard deviations

The share inside μ ± kσ, the share outside, and how rare a value beyond that distance is.

The share inside μ ± kσ, the share outside, and how rare a value beyond that distance is.
Within ± k SDInsideOutsideOutside, 1 in
0.538.2925%0.61712
168.2689%0.31733
1.586.6386%0.13367
1.64590.003%0.110
1.9695.0004%0.0520
295.45%0.045522
2.598.7581%0.012481
2.57699.0005%0.01100
399.73%0.0027370
3.599.9535%0.00052,149
Show all 13 rows
499.9937%6.33e-515,787
599.9999%5.73e-71,744,278
6100%1.97e-9506,797,346

Common questions

Is the probability of exactly one value zero?

For a continuous normal distribution, yes: a single point has no width, so no area. Ask for a range instead, such as between 179.5 and 180.5 for “180 cm to the nearest centimetre”.

How do I know if my data are normal?

Plot them: a roughly symmetric hump with thin tails is a good sign. Skewed data (house prices, incomes) or data with a hard edge (times can’t be negative) often aren’t, and the curve’s percentages will be off.

What is the difference between “between” and “outside”?

They add up to 1. Between 85 and 115 on an IQ scale (mean 100, SD 15) is about 68.27%, so outside that range is about 31.73%.