Skip to content

Roof Pitch to Degrees Converter

Any pitch in twelfths as an angle, a grade and a slope factor…

Any pitch in twelfths as an angle, a grade and a slope factor, or type the angle and get the pitch back. The whole fan from flat to steep is drawn.

/ 12
°

8/12 pitch

33.7°

A 66.7% grade, a ratio of 2:3: a roof 1.202 times as long as its level run.

1234567101216248/12 = 33.7°rise in 12 of run
Pitches from 1/12 to 24/12 as angles from level; 8/12 is 33.7°. Drag the handle round the arc.
Percent grade
66.7%
Slope factor
1.202
Rise per metre of run
667 mm

What can go on 8/12 · informational

  • Standing seam metal: allowed0.25/12 and steeper R905.10.2
  • Mineral-surfaced roll roofing: allowed1/12 and steeper R905.5.2
  • Asphalt shingles: allowed2/12 and steeper R905.2.2
  • Clay and concrete tile: allowed2.5/12 and steeper R905.3.2
  • Metal shingles: allowed3/12 and steeper R905.4.2
  • Wood shingles and shakes: allowed3/12 and steeper R905.7.2, R905.8.2
  • Slate: allowed4/12 and steeper R905.6.2

Minimum slopes from the IRC’s section R905, as adopted in the 2025 California Residential Code. The roofing maker’s instructions and your local code decide.

How this works: 2 sources,

How this works

Method

A pitch is a ratio, rise over run with the run fixed at 12, so the angle is the one whose tangent is that ratio: angle = atan(pitch ÷ 12). Going the other way, pitch = 12 × tan(angle). The percent grade is the same ratio times 100, and the slope factor √(1 + (pitch ÷ 12)²) is how much longer the sloping roof is than its level run. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: roof pitch from a rise, a span or an angle, drawn as a gable you can drag, with rafter length, pitch to degrees and hip rafter pages.

Every change on What’s new

How we make toolsReport a mistake

How pitch turns into degrees

A pitch is a ratio, rise over run with the run fixed at 12, so the angle is the one whose tangent is that ratio: angle = atan(pitch ÷ 12). Going the other way, pitch = 12 × tan(angle). The percent grade is the same ratio times 100, and the slope factor √(1 + (pitch ÷ 12)²) is how much longer the sloping roof is than its level run.

A second example: a 30° roof, as a European or Australian plan might give it, is 12 × tan 30° = 6.928, just under a 7/12 pitch, a 57.7% grade. A 45° roof is 12/12, the steepest pitch most people call a normal roof, and 18/12 is 56.3°.

Pitches are usually given in whole or half twelfths in the US; drag the fan to see where each sits. The calculator shows angles to a tenth of a degree, finer than any roof is built to.

angle = atan(pitch ÷ 12); pitch = 12 × tan(angle); grade = pitch ÷ 12 × 100%

Roof pitch to degrees

Every common pitch with its angle, grade and slope factor.

Every common pitch with its angle, grade and slope factor.
PitchDegreesGradeSlope factor
1/124.8°8.3%1.003
2/129.5°16.7%1.014
3/1214.0°25%1.031
4/1218.4°33.3%1.054
5/1222.6°41.7%1.083
6/1226.6°50%1.118
7/1230.3°58.3%1.158
8/1233.7°66.7%1.202
9/1236.9°75%1.25
10/1239.8°83.3%1.302
Show all 16 rows
11/1242.5°91.7%1.357
12/1245.0°100%1.414
14/1249.4°116.7%1.537
16/1253.1°133.3%1.667
18/1256.3°150%1.803
24/1263.4°200%2.236

Sources

The geometry is exact trigonometry. Code minimum slopes are informational: the roofing maker’s instructions and the code your town adopts decide.

Common questions

What is a 4/12 pitch in degrees?

18.43°. 3/12 is 14.04°, 5/12 22.62° and 6/12 26.57°.

What pitch is a 30 degree roof?

6.93/12: 12 × tan 30°. People usually round it to 7/12, which is 30.26°.

What is a 12/12 pitch?

A 45° roof: it rises a foot for every foot of run. Its slope factor is √2, so the roof surface is 1.414 times the area of the floor it covers.

How do I convert degrees to roof pitch?

Multiply 12 by the tangent of the angle. 20° gives 4.37/12, 35° gives 8.4/12. Type the angle in the second field and the calculator does it.