Skip to content

Potential Energy Calculator

The energy something has from its height, mgh: from a mass and a height…

The energy something has from its height, mgh: from a mass and a height, or work back to either. Let it fall and the bars show it turning into speed.

Fill in any two of energy, mass and height. The third is worked out; typing it replaces the first you typed.

m/s²

ExamplePotential energy

108,045J

Lifting 75 kg up 147 m stores 108,045 J. Let it fall and, with no air, it reaches 53.7 m/s (120 mph).

Enter your own values to see your result.

147 m upPotential108,045Kinetic0Total108,045J
Fallen 0%

Drag to let it fall: potential energy turns into kinetic energy, and the total stays the same.

Speed after falling that far
53.7 m/s · 193 km/h
In US units
79,690 ft·lbf
Its weight
735 N (165 lbf)
How this works: 12 sources,

How this works

Method

Lifting a mass m through a height h against gravity g stores energy mgh. A 75 kg hiker climbing 147 m gains 75 × 9.8 × 147 = 108 kJ (OpenStax Example 8.2). Lifting a 1 kg book onto a 2 m shelf stores only 19.6 J. Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: F = ma from any two values with the forces drawn, plus weight on every planet, kinetic and potential energy, work, power, momentum, impulse and a played-out collision.

Every change on What’s new

How we make toolsReport a mistake

How gravitational potential energy is worked out

Lifting a mass m through a height h against gravity g stores energy mgh. A 75 kg hiker climbing 147 m gains 75 × 9.8 × 147 = 108 kJ (OpenStax Example 8.2). Lifting a 1 kg book onto a 2 m shelf stores only 19.6 J.

Only changes in potential energy matter, so the zero is wherever you choose. Measure from sea level instead of the trail’s base and every value shifts by the same amount, while the climb still adds 108 kJ. A height below your zero gives negative potential energy, and the calculator accepts it.

Let the mass fall and, with no air resistance, the potential energy turns into kinetic energy: ½mv² = mgh, so v = √(2gh), whatever the mass. The bars in the answer card trade one for the other as you drag; the total stays the same.

PE = m g h · h = PE ÷ (m g) · falling: v = √(2 g h)

Potential energy of 1 kg at different heights

mgh for 1 kg under standard gravity, and the speed it would reach falling back down with no air.

mgh for 1 kg under standard gravity, and the speed it would reach falling back down with no air.
HeightEnergySpeed after the fall
0.5 m4.9 J3.13 m/s (11.3 km/h)
1 m9.81 J4.43 m/s (15.9 km/h)
2 m19.6 J6.26 m/s (22.5 km/h)
5 m49 J9.9 m/s (35.7 km/h)
10 m98.1 J14 m/s (50.4 km/h)
20 m196 J19.8 m/s (71.3 km/h)
50 m490 J31.3 m/s (113 km/h)
100 m981 J44.3 m/s (159 km/h)
500 m4,903 J99 m/s (357 km/h)
1000 m9,807 J140 m/s (504 km/h)

Common questions

Where is zero potential energy?

Wherever you choose: the floor, the ground, sea level. Only differences in height matter for anything physical, such as how fast something will be falling when it lands.

Does the path matter?

No. Gravity is a conservative force, so the potential energy depends only on the height, not on whether you took the stairs or the lift.

How do I find the height from the energy?

h = PE ÷ (mg). Type the energy and the mass and leave the height empty: 1,000 J on 10 kg is about 10.2 m up.