Impulse Calculator
Impulse is the change in momentum, and it equals the average force times the…
Impulse is the change in momentum, and it equals the average force times the contact time. Stop the same thing more slowly and the force drops.
26 ms.
ExampleAverage force
35.9N
Dropped from 1.5 m, 0.172 kg hits at 5.42 m/s; stopping it in 26 ms takes an average net force of 35.9 N (8.07 lbf), 21.3 times its weight; the floor pushes with that plus its weight, 37.6 N.
Enter your own values to see your result.
The area of each block is the impulse. A softer, longer stop has the same area at a much lower force.
- Impulse (change in momentum)
- 0.933 N·s (0.21 lbf·s)
- Times its own weight
- 21.3×
- Stopping 10 times more slowly
- 3.59 N
How this works: 13 sources,
How this works
Method
Impulse is the change in momentum, J = m(v − u), and it also equals the average force times the time it acts, J = FΔt. So the average force of an impact is the change in momentum divided by the contact time. A 0.172 kg phone dropped from 1.5 m hits at 5.42 m/s; stopped by a hard floor in 0.026 s, it feels an average force of 36 N (OpenStax Example 9.4, 36 N), about 21 times its weight. Full method
Sources
- OpenStax University Physics Volume 1, §9.2 Impulse and Collisions
- OpenStax University Physics Volume 1, §3.5 Free Fall
- OpenStax University Physics Volume 1, §5.3 Newton’s Second Law (2016)
- OpenStax University Physics Volume 1, §5.4 Mass and Weight (2016)
- OpenStax University Physics Volume 1, §7.1 Work (2016)
- OpenStax University Physics Volume 1, §7.2 Kinetic Energy (2016)
- OpenStax University Physics Volume 1, §7.4 Power (2016)
- OpenStax University Physics Volume 1, §8.1 Potential Energy of a System (2016)
- OpenStax University Physics Volume 1, §9.3 Conservation of Linear Momentum (2016)
- OpenStax University Physics Volume 1, §9.4 Types of Collisions (2016)
- CODATA 2022: standard acceleration of gravity (NIST, CODATA 2022)
- Planetary Fact Sheet (NASA Goddard (NSSDCA))
- Guide for the Use of the SI, Appendix B.8 (conversion factors) (NIST, SP 811)
How it’s tested
2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.
Privacy
On your device. Nothing you enter or open leaves this browser. About privacy labels
Changes
- First published: F = ma from any two values with the forces drawn, plus weight on every planet, kinetic and potential energy, work, power, momentum, impulse and a played-out collision.
How impulse and average force are worked out
Impulse is the change in momentum, J = m(v − u), and it also equals the average force times the time it acts, J = FΔt. So the average force of an impact is the change in momentum divided by the contact time. A 0.172 kg phone dropped from 1.5 m hits at 5.42 m/s; stopped by a hard floor in 0.026 s, it feels an average force of 36 N (OpenStax Example 9.4, 36 N), about 21 times its weight.
Short contact times make large forces. A tennis serve speeds a 0.057 kg ball from rest to 58 m/s in about 5.0 ms: an average force of 661 N (OpenStax Example 9.5, 6.6 × 10² N).
This is why padding, crumple zones, airbags and bending your knees when you land all work the same way: they make the stop last longer. The momentum to lose is the same, so the force falls in proportion, the lighter block in the drawing.
J = m(v − u) = F Δt · F = m(v − u) ÷ Δt
- The impulse of a force is the average force times the time it acts, and it equals the change in momentum it causes (the impulse-momentum theorem). Source: OpenStax University Physics Volume 1, §9.2 Impulse and Collisions.
- An object falling from rest with no air resistance hits at √(2gh), which for the 1.5 m phone drop is 5.4 m/s. Source: OpenStax University Physics Volume 1, §3.5 Free Fall.
Average force to stop a dropped phone
A 0.172 kg phone dropped from 1.5 m, for different stopping times: the impulse is the same, the force is not.
| Stopping time | Average force | Times its weight |
|---|---|---|
| 2 ms | 466 N | 277× |
| 5 ms | 187 N | 111× |
| 10 ms | 93.3 N | 55.3× |
| 26 ms | 35.9 N | 21.3× |
| 50 ms | 18.7 N | 11.1× |
| 100 ms | 9.33 N | 5.53× |
| 200 ms | 4.66 N | 2.77× |
| 500 ms | 1.87 N | 1.11× |
Common questions
What is impulse in physics?
The change in an object’s momentum, which equals the average force on it times how long that force acts. Its unit is the newton-second, the same as kg·m/s.
Why does a bounce hurt more than a stop?
A bounce reverses the velocity, so the change in momentum is bigger: from −5 m/s to +5 m/s is a change of 10 m/s, twice that of just stopping. Enter both speeds with opposite signs to see it.
Is the peak force higher than the average?
Yes. Real impacts build up and fall away, so the peak can be several times the average this calculator gives. The impulse, the area under the force-time curve, is the same.