Skip to content

Water Pressure at Depth Calculator

Every 10 metres of water adds about one atmosphere of pressure.

Every 10 metres of water adds about one atmosphere of pressure. Enter a depth and a liquid to get the gauge pressure (the water alone) and the absolute pressure (with the air).

kg/m³
m/s²

9.80665 is standard; the dam example uses the textbook’s 9.8.

Pressure in

ExampleGauge pressure (the water)

392kPa

40 m down in water (4 °C), the water above presses with 392 kPa, and with the air on top the total is 493 kPa, 4.87 atmospheres.

Enter your own depth to see your result.

surface0 m1 atm10 m1.97 atm20 m2.93 atm30 m3.9 atm4.87 atm here
Total, with the air
493.3 kPa · 4.87 atm
In psi
56.9 psi gauge
Force on each square metre
392 kN (88,125 lbf)
How this works: 4 sources,

How this works

Method

At a depth h in a liquid, the liquid above presses down with its weight: ρgh on every square metre, the gauge pressure. Water 40.0 m deep on average presses on a dam with 392 kPa, 3.92 × 10⁵ Pa (OpenStax Example 14.1, with g = 9.80 m/s²). Full method

How it’s tested

2 worked examples for this page are checked by automated tests before every release: given the inputs, the tool must show the expected answer.

Privacy

On your device. Nothing you enter or open leaves this browser. About privacy labels

Changes

  • First published: density, mass and volume from any two with a will-it-float drawing, plus pressure, water pressure at depth and specific gravity pages.

Every change on What’s new

How we make toolsReport a mistake

How the pressure at a depth is worked out

At a depth h in a liquid, the liquid above presses down with its weight: ρgh on every square metre, the gauge pressure. Water 40.0 m deep on average presses on a dam with 392 kPa, 3.92 × 10⁵ Pa (OpenStax Example 14.1, with g = 9.80 m/s²).

Add the air pressing on the surface, one atmosphere, for the absolute pressure: p = p₀ + ρgh. In sea water, ten metres down gives 101 kPa from the water, about one extra atmosphere, so a diver at 10 m is under about 2 atmospheres in all.

The pressure depends only on the depth and the liquid, not on the shape or size of the container: a narrow pipe and a lake at the same depth press the same. Denser liquids press harder: mercury, at 13,600 kg/m³, gives the same pressure in 13.6 times less depth than water, which is why barometers used it.

p = p₀ + ρ g h · gauge pressure = ρ g h

Pressure in sea water by depth

Gauge and absolute pressure in sea water (1,030 kg/m³) under standard gravity, with one atmosphere at the surface.

Gauge and absolute pressure in sea water (1,030 kg/m³) under standard gravity, with one atmosphere at the surface.
DepthFrom the waterTotalTotal in atm
1 m10.1 kPa111.4 kPa1.1
5 m50.5 kPa151.8 kPa1.498
10 m101 kPa202.3 kPa1.997
20 m202 kPa303.3 kPa2.994
30 m303 kPa404.4 kPa3.991
40 m404 kPa505.4 kPa4.988
50 m505 kPa606.4 kPa5.984
100 m1,010 kPa1,111 kPa10.97
500 m5,050 kPa5,152 kPa50.84
1,000 m10,101 kPa10,202 kPa100.7
Show all 12 rows
4,000 m40,403 kPa40,505 kPa399.8
10,000 m101,008 kPa101,110 kPa997.9

Common questions

How much does water pressure increase with depth?

About one atmosphere (101 kPa, 14.7 psi) for every 10 metres of fresh water, or 9.8 kPa per metre. Sea water, a little denser, adds about 10.1 kPa per metre.

Does the size of the lake matter?

No. Only the depth and the liquid’s density matter. A thin tube of water 10 m tall makes the same pressure at its bottom as a 10 m deep lake.

What is the difference between gauge and absolute pressure?

Gauge pressure is what the water adds, ρgh. Absolute pressure adds the air above, one atmosphere at sea level. The calculator shows both.